BOOTP

BOOTP

美 　英

• n.引导协议
• 网络引导协议(bootstrapprotocol)；自举协议；自举引导协议

英汉解释

n.

1. 引导协议

例句

Command you can give the path and name of the file to boot if you did not give an explicit name via your bootp dhcp server.

如果您没有通过bootpdhcp服务器给出一个清楚的名字，接着。

DHCP is a more flexible, backwards-compatible extension of BOOTP, and some of the latest systems can only boot using DHCP.

DHCP是更灵活的向后兼容的BOOTP扩展，一些最新的系统可能只使用DHCP进行引导。

BOOTP is an IP protocol that informs a computer of its IP address and where on the network to obtain a boot image.

BOOTP是一种IP协议，用来告诉一台计算机它自己IP地址以及从网络何处获得启动映像。

This means that the binding between the MAC address and the IP address must have already been configured in the BOOTP server.

也就是说，在BOOTP伺服器中，已经将所有MAC地址及其对应IP地址于事前定义好了。

The Internet community first developed the BOOTP protocol to enable configuration of diskless workstations.

为了要能够为无硬碟的工作站进行组态，网际网路学会首先发展了BOOTP通讯协定。

The BOOTP protocol is used for booting (starting) computers from the network.

BOOTP协议的作用是通过网络来重起（启动）计算机。

Displays the server table which can contain configuration entries to support BOOTP clients.

显示包含支持BOOTP客户端的配置项目的服务器表。

A. Configure all of the routers to route BOOTP broadcast frames.

配置所有的路由器来转发BOOTP广播帧。

DHCP servers can lease IP addresses on different LANs using the BOOTP protocol.

DHCP服务器使用BOOTP协定能在不同的区域网络上出租IP位址。

(If you will need this option later, define the third boot device as Network BOOTP).

（如果您以后还需要这个选项，那么将第三引导设备定义为NetworkBOOTP）。

Boot net: dhcp to boot from a TFTP and BOOTP or DHCP server.

从一个TFTP和BOOTP或DHCP服务器上引导。

(If you will need this option later, define the third boot device as Network BOOTP).

（如果您以后还需要这个选项，那么将第三引导设备定义为NetworkBOOTP）。

This is used during the BOOTP phase of the installation to associate the LPAR with this host entry.

使用这个选项在安装的BOOTP阶段将LPAR和host条目关联起来。

Use RARP to obtain its IP address, and therefore you must use BOOTP for net booting your Alpha

使用RARP来获得它的IP地址。因此您必须使用BOOTP来从网络启动您的Alpha机器