EPDM
美 
英
- 网络三元乙丙橡胶(Ethylene-Propylene-Diene Monomer)；三元乙丙胶；三元乙丙橡胶密封条
例句
Made of white EPDM rubber and cork, this soft tub was designed to be a simple option for outdoor fun, healing or washing up.
这个软软的浴盆由白色三元乙丙橡胶和软木塞组成，它的构思很简单，可用于外出游乐，治伤养病或是洗餐具。
Both upper sealing rings in the lower liner seal are similar and made of Ethylene Propylene Diene Monomer rubber (EPDM).
无论在低上密封衬垫密封环相似和三元乙丙橡胶（EPDM）制成。
Improved tensile strength and elongation of ethylene propylene diene monomer (EPDM) compounds used for wire and cable.
提高电线电缆用三元乙丙橡胶（EPDM）材料的拉伸强度和伸长率。
Dry sealing is achieved by means of pressure balancing principle as it adopts double EPDM rubber sealing strip.
双道三元乙丙胶条，利用压力平衡原理实现干式密封。
The processability of uncured EPDM would be improved by decreasing process frequency, increasing strain or temperature.
降低频率、提高应变或温度有利于改善改性炭黑增强EPDM的加工性能。
Heat of the main construction material sealant mainly isobutene polymer, EPDM rubber and thermoplastic styrene block copolymer.
热施工密封胶的主体材料主要是异丁烯类聚合物、三元乙丙橡胶和热塑性的苯乙烯嵌段共聚物。
The blends with a morphology of continuous phase of NBR and dispersion phase of EPDM had good ozone resistance and oil resistance.
具有以NBR为连续相、EPDM为分散相结构形态的并用胶有较好的耐油性能与良好的耐臭氧性能。
A very wide option of patented designed EPDM gaskets, not alterable under any different climatic condition, completes the ALUK System.
特殊设计的EPDM胶条选择范围很广，在任何气候条件下它都不会变化，完善了ALUK系统。
Liquid EPDM is the ethylene-propylene-diene polymer with relatively low molecular weigh, so it has low viscosity.
液体EPDM（三元乙丙橡胶）是相对低分子量的乙烯-丙烯二烯三元共聚物，因此具有低粘度。
The vulcanization behavior of EPDM sulfur curing systems was studied through the application of orthogonal testing method.
用正交试验法对EPDM硫黄硫化体系的硫化特性进行了研究。
The extrusion pressure was lower than that of pure EPDM, and its decreasing range was larger with increasing mass fraction of PPA.
加入PPA可以改善EPDM挤出物的外观，且挤出压力低于纯EPDM，PPA质量分数越大，其降低幅度越大。
The model is used to simulate data of stress relaxation coefficient of EPDM in oven during accelerated aging with the changing of the time.
我们利用该模型拟合了乙丙橡胶在烘箱加速老化时应力松弛系数随时间变化的数据。
Secondary seal material shall be FPM or EPDM and correspond to the seat material for maximum chemical resistance.
二级密封材料应该是FPM或三元乙丙橡胶和具有最好耐化学腐蚀性能的相应阀座材料。
EPDM has good abrasion and tear resistance and offers excellent chemical resistance to a variety of acids and alkalines.
EPDM具有良好的抗磨损和抗撕裂性能，以及优秀的抗酸碱化学腐蚀的性能。
EPDM or PTFE diaphragm selection affords wide range of applications, from corrosives to slurries and high-purity.
三元乙丙橡胶或聚四氟乙烯隔膜选项使得应用更加广泛，从防腐，到泥浆和高纯度。
Do not install EPDM liner in compressed air lines.
不要在压缩空气管道内安装EPDM衬垫。
Furthermore, the stress-strain curves and stress relaxation behavior of EPDM vulcanizates was also studied.
此外，还对EPDM的应力-应变曲线和应力弛豫行为进行了研究。
The course of development of EPDM composite coloured shingle is described with focus on its main materials and self-stick layer.
介绍了EPDM复合彩瓦的研制过程，并对其中的主体材料和自粘层作了详细的论述。
EPDM rubber seal in automotive products has become the principal material, its development and application of both.
三元乙丙橡胶在我国车用橡胶密封条产品生产中已成为主体材料，其开发和应用都有着广阔的市场前景。
And EPDM (EPDM) is already in the car seal industry in a wide range of applications.
而三元乙丙橡胶（EPDM）已在汽车密封条行业中得到广泛的应用。
The application of orthogonal experiment to the EPDM formulation is described.
介绍了正交试验法在EPDM配方试验中的应用。
Three EPDM belongs to non crystalline rubber reinforcing agent, if not, then the mechanical properties of vulcanizates low, of no use value.
三元乙丙橡胶属于非结晶性橡胶，若不加补强剂，则硫化胶的物理机械性能低，没有使用价值。
Three options for resilient seat materials (EPDM, NBR and FKM) and two packing options are available.
有三种弹性阀座材料（EPDM，NBR和FKM）以及两种密封填料可供选择。
With the addition of EPDM and MMT, the notched impact toughness of PET was greatly improved.
EPDM及增容剂的引入都较大程度地改善了复合材料的缺口冲击强度。
The tensile strength and Shore A hardness decreased with EPDM amount increasing.
随着EPDM用量的增加，并用胶的拉伸强度及邵尔A硬度降低；
The effect on the toughening of polypropylene(PP) by styrene-ethyl ene propylene diblock copolymer(SEP) as well as EPDM was studied.
考察了苯乙烯-二元乙丙橡胶嵌段共聚物（SEP）和三元乙丙橡胶（EPDM）对聚丙烯（PP）的增韧作用。
The optimum properties of the set EPDM rubber insulation are as follows: density 1.
确定最佳配方和工艺生产出的三元乙丙橡胶绝热层密度为1。
Compared with diolefine rubber, EPDM has less double bond.
与二烯烃橡胶相比，EPDM的双键很少。
EPDM has many kinds of production processes, each process has its unique properties and characteristics.
乙丙橡胶有着多种生产工艺，每个生产工艺都有其特有性能和特点。
In order to improve the sulfuration speed of EPDM sizing material, mass accelerants are required to add.
为了提高EPDM胶料的硫化速度，需要加入大量的促进剂。
Industry: EPDM; Rubber; Daily life of rubber products; Plastic Building Materials; Other synthetic rubber;
所属行业：乙丙橡胶；废橡胶；生活日用橡胶制品；塑料建材；其他合成橡胶；；
Development of resistance to high-temperature EPDM compounded rubber stock used for cars
轿车用耐高温乙丙橡胶混炼胶料的研制
the coupling agent A-172 had a more significant modifying effect and gave EPDM vulcanizate much higher tear strength;
偶联剂A-172的改性作用较为明显，可显著提高EPDM硫化胶的撕裂强度；
Mechanical properties and dispersion morphology of radiation-vulcanized EPDM filled with nano-filler
纳米填料填充辐射硫化三元乙丙橡胶的力学性能及分散形态
Study of Development and Application of EPDM Rubber Tubes for Intercooler
EPDM中冷器出气胶管的开发及应用研究
The Changes of Status of Brominated Phenolic Resin in EPDM during Curing and its Effects on the Properties
溴化酚醛树脂在硫化过程中的分散状态变化及其对性能的影响
Industry: EPDM; Other synthetic rubber; Industrial Rubber Products; Other rubber products;
所属行业：乙丙橡胶；其他合成橡胶；工业用橡胶制品；其他橡胶制品；；
Test Methods for Rubber - Evaluation of EPDM (Ethylene Propylene Diene Terpolymers) Including Mixtures with Oil
橡胶用的试验方法.EPDM（乙烯丙烯二烯三聚物）包括与油的混合物的评价
Industry: Silicone rubber; NBR; Viton; Polyurethane Rubber; EPDM; Other synthetic rubber;
所属行业：硅橡胶；丁腈橡胶；氟橡胶；聚氨酯橡胶；乙丙橡胶；其他合成橡胶；；
Industry: Oil seal; Rubber molding; Gasket; Silicone rubber; Industrial Rubber Products; EPDM;
所属行业：油封；橡胶成型加工；密封垫圈；硅橡胶；工业用橡胶制品；乙丙橡胶；；
