J-integral

J-integral

美 　英

• 网络J积分；库仑积分

例句

The methods and processes can be used to analyze J-integral of tee with longitudinal through-wall crack by ABAQUS.

因此，可按该方法和步骤应用ABAQUS程序计算含裂纹三通的J-积分。

A systematical calculation was conducted for the J integral crack parameter of a welded joint using the finite element method.

采用有限元方法对焊接接头的断裂参量J积分进行了系统计算。

In composites with low adhesion level between matrix and glass beads, the critical J-integral value diminished due to the presence of PET.

在与基体之间的附着力和玻璃珠低层次复合材料，临界J积分值减少由于PET的存在。

At last the K1 of elastic plane with different thickness was calculated by the theory of J-integral.

最后应用J积分理论计算了有限厚度的板在刚性压头作用下的应力强度因子。

Because the integral relates with the path, one special computer formula of J -integral is given in the last.

由于积分与路径有关，最后仅给出了一种特殊路径下J积分的计算公式。

The results indicate that the K1 by J integral was in accord with the theoretical value.

数据结果表明，由J积分方法计算的K，与理论值一致。

The results indicate that multi-site damage have a great influence on the J integral values.

结果表明，多部损伤对焊接接头结构强度造成了极其恶劣的影响。

Path-Independent J-Integral and Its Dual Form in Elastic-Plastic Solids with Finite Deformation

有限变形弹性体J积分守恒及其对偶形式

Finite Element Numerical Analysis of J-Integral Values of Welded Joint Containing Different Location Cracks

不同裂纹位置焊接接头J积分有限元数值分析

Cyclic J-integral Engineering Assessment Method for Remaining Fatigue Livetime of Crack Structure

含裂纹结构剩余疲劳寿命循环J积分工程评估方法

J-integral Finite Element Analysis of Fracture Failure of Submarine Cone-cylinder Pressure Shell Structure

潜艇耐压锥柱结合壳断裂失效J积分有限元分析

Calculations of Three Dimensional J-Integral by Surface Integral Method in Finite Element Analysis

三维J积分有限元分析的曲面积分法

J-integral estimation of circumferential-cracked round bars subjected torsion

扭转载荷下带环状裂纹圆棒的J积分的评价

J-Integral Study of Elbow with CircumferentialThrough-Wall Crack

含环向贯穿裂纹弯管的J积分研究

Crack Opening Displacement and J-integral Calculation of Fracture Process Zone Length

断裂过渡区长度张开位移和J积分的计算

Numerical Finite Element Analysis of J-integral Fracture Parameters for Welded Joints

焊接接头J积分断裂参量的有限元数值分析

Standard Test Method for J-Integral Characterization of Fracture Toughness

断裂韧性的J-综合特性的标准测试方法

Discussion on determination of J-integral and comparison of different test standards

关于J积分测定方法的比较及相关问题的讨论

Complex Function Method On J-integral of Mixed Mode Crack-Tip for Anisotropic Fiber Composite Plate

含裂纹复合材料板J积分的复变函数方法

The Progress of Engineering Evaluation Method of J-integral in Structure Containing Defect

含缺陷结构J积分工程估算方法研究进展

Theoretical Research of Crack Tip J-integral for Orthotropic Composite Plate

正交异性复合材料板裂纹尖端J积分的理论探讨

The J-Integral Criterion of Interface Fracture in Composite Laminates

复合材料层压板界面裂纹的J积分判据

Calculation of three-dimension elastic-plastic based J-integral

基于三维效应的弹塑性J积分计算

The J-Integral Solution of Circumferential Surface Cracked Pipe

周向表面裂纹管道的J积分解

Research on J-integral of Mixed Mode Crack-tip for Anisotropic Fiber Composite Plate

各向异性复合材料板混合型裂纹尖端的J-积分

Experimental Study on the Effect of Mechanical Heterogeneity on Dynamic J-integral for Welded Joints

力学不均匀性对焊接接头动态J积分影响的实验研究

Conservation Law and Application of J-Integral in Multi-Materials

J积分在多层介质中的守恒性和其应用

Numerical Investigations to J-integral in Cracked Weldment Containing Damage Based on Finite Element Method

含损伤焊接接头裂纹体J积分的有限元数值研究

Effect of Higher Order Terms in Eigenfunction Expansion Forms on J-Integral

特征展开式中高阶项对J积分的影响

Computation of J-Integral With Finite Element Method

有限元方法计算J积分

Calculating and analyzing of J-integral in the center-crack ed panel

三维中心裂纹板中J积分的计算及分析

On J-Integral of Mode I Crack-Tip for Anisotropic Fiber Composite Plate

各向异性板I型裂纹尖端的J-积分

The Analysis of J-integral in Anisotropic Elastic Solids

各向异性弹性体中的J积分分析

On Crack-Tip J-Integral for Orthotropic Composite Plate

关于复合材料单层板裂纹尖端的J积分

Research of J-integral for crack parallel to interface

平行界面裂纹J积分的研究

Study on three-dimensional cracked J-integral

三维裂纹J积分研究

New Cyclic J-Integral for Low-Cycle Fatigue Crack Growth

描述低周疲劳裂纹扩展速率的循环J积分新参量

J-integral of Surface Crack in Overmatched Joint

高组配焊接接头表面裂纹J积分试验研究