Vickers-hardness

Vickers-hardness

美 　英

• 网络维氏硬度；硬度可达维氏

例句

The vickers hardness and nitriding surface fulfill requirements, and also improves the machining quality of the products.

主轴锥孔的维氏硬度和氮层深度均达到要求，提高了产品的加工质量。

With W content increasing, the elastic module, flexural strength and fracture toughness increase, but the Vickers'hardness decreases.

随W含量的增加，复合材料弹性模量、抗弯强度和断裂韧性增大，而硬度减小。

Welding simulation also showed that the vickers-hardness decrease with heat input increasing.

另外，随着热输入的增大，两种钢粗晶区的硬度均不断降低。

QUARRY PRODUCTS. LIMESTONES. MEASUREMENT OF VICKERS HARDNESS.

采石场产品.石灰石.维氏硬度的测量

Vickers hardness testing of resistance spot, projection and seam welds (low load and microhardness).

电阻点焊、凸焊和滚焊的维氏硬度试验（低荷载和超微硬度）

In addition, some properties of the pure Ti2AlC samples (density, Vickers hardness, and electrical conductivity) were measured respectively.

同时还测试了所合成高纯Ti2AlC试样的部分物理性能，包括密度、维氏显微硬度和电导率。

ZINC AND ZINC ALLOYS. METHOD FOR THE VICKERS HARDNESS TESTING ON FOILS AND COILS.

锌和锌合金.铸制品与轧制品的硬度试验

Metallic materials. Vickers hardness test. Part 2 : verification of testing machines.

金属材料.维氏硬度试验.第2部分：试验机械的校准

Metallic materials. Vickers hardness test. Part 3 : calibration of reference blocks.

金属材料.维氏硬度试验.第3部分：标准块的校准

Metallic materials. Vickers hardness test. Part 1 : test method.

金属材料.维氏硬度试验.第1部分：试验方法

The results show that: the strengthening phases precipitates fewer and the vickers hardness decreases with cooling speed increasing;

结果表明：冷却速度越快，各种强化相析出的越少且小，硬度越低；

Metallic materials - Vickers hardness test - Verification of testing machines

金属材料.维式硬度试验.试验机器的验证

Metallic materials - Vickers hardness test - Part 3: Calibration of the reference blocks; example of performance of the reference blocks

金属材料.维氏硬度检验.第3部分：硬度对比板的校准.使用硬度对比板举例

Metallic materials - Vickers hardness test - Calibration of reference blocks

金属材料.维式硬度试验.参考阻滞的校正

The change low of the Vickers Hardness keep consistent with the change low of compressive strength;

硬度的变化规律与抗压强度的变化规律保持一致；

A New Method for Quickly and Automatically Analysis of the Image of Vickers Hardness Using Wavelet Theory

基于小波的维氏硬度图快速自动分析新方法

Unification of Hardness Scale Connected with Digitization of Vickers Hardness Test

硬度标度的统一与维氏硬度试验的数字化

test values can be converted to magnitude, Brinell, Rockwell, Vickers hardness;

可将测试值转化为里氏、布氏、洛氏、维氏硬度值；

Vickers Hardness Measurement by Using Digital Image Wavelet Multi-resolution Analysis

应用数字图像小波多分辨率理论测试维氏硬度

Digitalization principle of Vickers hardness tester

维氏硬度计数字化原理

Vickers hardness test -- Verification of testing machines

维氏硬度试验试验机的验证

Knoop hardness and its conversion to Vickers hardness

努氏硬度及其与维氏硬度的换算

Evaluation of Measurement Uncertainty in Vickers Hardness Test

金属维氏硬度试验测量不确定度的评定

verification regulation of metal vickers hardness tester

金属维氏硬度计检定规程

Metallic materials - Vickers hardness test - Test method

金属材料.维式硬度试验.试验方法

Test methods for vickers hardness at elevated temperatures

高温维氏硬度测试方法

Linear Relationship between Vickers-hardness and Strength of 6063 Aluminium Alloy Profile

6063铝合金型材维氏硬度与强度的线性关系

Test method for Vickers hardness of high performance ceramics

工程陶瓷维氏硬度试验方法

Metallic vickers hardness test--Part 3: Calibration of hardness reference blocks

金属维氏硬度试验第3部分：标准硬度块的标定

metallic materials - vickers hardness test - part 4 : tables of hardness values

金属材料.维氏硬度试验.第4部分：硬度值表

Test Method for Vickers Hardness of Metallic Materials

金属材料维氏硬度的测试方法