ansys
美 
英
例句
Aimed by the finite element software ANSYS, this paper carries out a dynamical and time-history analysis of a frame structure.
本文以ANSYS有限元软件为工具，进行了框架结构、基础及地基的动力时程分析。
ANSYS was used to calculate the stress within membranes of welded metal bellows used for mechanical sealing.
利用ANSYS有限元程序对机械密封焊接金属波纹管波纹膜片进行应力分析计算。
The static and dynamic characteristics of the beam of a gantry-type machining center are analyzed by means of ADAMS and ANSYS.
对一种国产龙门式加工中心的横梁关键部件，采用机械系统多刚体动力学仿真软件ADAMS和有限元分析软件ANSYS进行了静动态特性分析；
The elastoplastic finite element analysis, strength reduction method and ANSYS software are used for the calculation.
采用弹塑性有限元和强度折减法以及ANSYS软件进行了计算；
Then one of the finite element analysis software, ANSYS was used in this paper for mechanical analysis.
同时按计算机方法，利用ANSYS有限元软件对大桥主要结构部位进行力学分析。
the finite element tool ANSYS and theory calculation were used for the specimen STJ-4, and compared to the experimental results.
采用有限元分析软件ANSYS和理论计算对试件STJ-4进行分析，并与试验结果对比。
The Ansys software was used for simulating the 3D electric field distributions of the impedance sensor in stratified flow.
利用Ansys进行了阻抗传感器油水水平分层条件下的三维电场仿真研究。
The stress of clamping of the closing sleeve is calculated by means of finite element of ANSYS to optimize clamping structure.
采用ANSYS有限元分析软件，对夹紧套筒进行了应力计算，以确定夹紧套筒的结构形式。
ANSYS software was used to find the best reinforcement of the whole slab within the low and up bounds.
给出了利用ANSYS在最优配筋的上、下限值范围内寻找整块板最优配筋的计算方法。
Then, the SMA damper passive control of a frame structure is simulated by ANSYS according to its relative parameter selection.
针对所提出的阻尼器及相关参数选择，利用ANSYS进行框架结构中的被动控制模拟。
In this paper; we present a computational study of the jetting process using ANSYS fluid-structure interaction (FSI) analysis tools and .
利用ANSYS流固耦合作用工具FSI及任意拉格朗日欧拉法对胶液喷射器内胶液流动过程进行了研究。
Shape optimization for bracket is studied, by means of the Random Designs and the Sub-problem method by ANSYS Software.
利用通用有限元程序ANSYS，采用随即搜索法与子问题法对整体式肘板形状优化设计。
The electro-acoustic characteristics of the miniature broadband and wide-beam longitudinal transducer are simulated by the ANSYS software.
利用ANSYS有限元软件模拟了小型宽带宽波束纵向水声换能器的电声特性。
The mechanism of heat conduction in polyfoam-fly ash thermal insulation materials (FP) was studied with a finite element software ANSYS.
应用有限元软件ANSYS研究了粉煤灰泡沫塑料复合保温材料（FP材料）的传热机理。
The article analyzes the stress state of asphalt overlay in vehicle load by a calculation of finite dement procedure ANSYS.
本文利用ANSYS有限元计算程序分析了沥青加铺层在车辆荷载作用下的应力状态。
Experience: Working knowledge with ANSYS is preferred. Experience in semiconductor manufacturing is an added advantage.
具备ANSYS相关知识和半导体制造相关工作经历者优先。
Through bidirectional data interchange between ADAMS and ANSYS, dynamic stress analysis of this elastic mechanism is conducted.
通过进行ADAMS与ANSYS之间的双向数据交换，对该喷管弹性机构构件进行了动态应力分析。
The important part of this article is to simulate the stable and transient thermal distribution using the Analysis system (ANSYS) software.
利用ANSYS软件模拟半导体激光器阵列芯片及载体中的稳态及瞬态热分布是本论文的重点。
By the first-order method in the optimized design module of ANSYS, the optimized design program is worded out in the APDL language.
采用有限元分析软件ANSYS中自带的优化设计模块中的一阶优化方法编制了APDL语言优化设计程序。
In this paper, ANSYS software is introduced and is used for the analysis of no-load magnetic field of the synchronous generator.
详细介绍了ANSYS软件，并把ANSYS软件用于同步发电机空载磁场分析中，给出了样机的磁力线分布图和气隙磁密波形。
For the first used software - ANSYS, the author namely has carried on the narration to the static theory of the finite element analysis.
课题研究中，运用到了ANSYS软件，作者即对有限元分析的静力学理论进行了讲述。
In addition, through a instance ANSYS software was applied to optimize electromagnetic thrust fluctuation design.
利用ANSYS软件针对具体项目进行电磁推力波动优化设计，削弱电磁推力波动。
The software ANSYS was used to analyze two different examples and utilized the result to make precision evaluation on the formula.
采用ANSYS软件对工程实例进行计算分析，利用分析结果对推导公式进行精度评价。
About the safety performance of the Ye Sanhe suspended-pipe bridge, this paper carried out a full-bridge simulation analysis using ANSYS.
关于野三河悬索管桥的安全性能，本文采用ANSYS软件进行了全桥模拟分析。
Introduce an analyses process by doing FEA calculate to the U-style BOP's body and intermediate flange with ANSYS.
应用ANSYS软件对U型防喷器壳体、中间法兰等零部件进行了有限元计算；
Analysis of the non- linear finite element for the structural model of a short-leg shear wall is done by using ANSYS software.
最后利用ANSYS计算软件对短肢剪力墙结构模型进行非线性有限元分析。
Thirdly, the main frame has been designed optimally by the means of statics and modal analysis in ANSYS software.
然后在ANSYS软件中用有限元方法从静力学及模态分析方面对主支撑架体进行优化设计；
Through ANSYS analysis, equivalent load method is found to be applicability in finite element analysis.
通过ANSYS数值计算，发现了等效荷载法在有限元计算分析中的良好适用性。
The contact behavior between the reinforcement pad and the vessel shell was analyzed with nonlinear method of the software ANSYS.
采用ANSYS软件的非线性分析方法，模拟分析了补强圈与壳体之间的接触行为。
Then the author of this article employs ANSYS software to investigate the creep effect of twice-prestressed concrete composite beam.
然后利用ANSYS软件对二次预应力组合梁徐变效应进行了有限元分析。
ADAMS & ANSYS is combined by using neutral file in the system, and this system can simulate the automotive seat's performance during impact.
通过模态中性文件结合ADAMS及ANSYS，该模型系统能很好的仿真汽车座椅的冲击强度特性，并能直观地显示座椅的动态性能。
Making APDL command by using this algorithm, appending the menu to the main menu of the ANSYS, the system is completed.
将此算法编写成APDL命令流，在ANSYS的主菜单下通过二次开发添加菜单构成此系统。
Based on the experimental data, the stress and strain of oil tube were calculated by means of the finite element software ANSYS.
在此基础上，应用大型有限元分析软件ANSYS，对油管在各种工况下的应力和应变进行了计算。
The results of the analysis by ANSYS indicated that the resistance factors in the cold-formed steel specification is slightly small.
根据ANSYS的分析结果可知冷弯薄壁型钢规范中规定的抗力分项系数偏小。
Utilizing ANSYS, the static deformation and natural frequency for the spindle of the NC boring-milling machine are analyzed.
利用有限元分析软件ANSYS计算数控镗铣钻床主轴的静态变形与一阶固有频率。
ANSYS, a finite element software, was used to analyze the structural behavior to guide the fatigue test.
为指导疲劳试验，了解结构受力特性，用通用有限元软件ANSYS对结构进行了分析。
This thesis does secondary development to realize raft foundation analysis with intuitionistic model, simply calculation and convenient use.
本论文在ANSYS基础上进行二次开发，实现模型直观、计算简便、通用性强的高层建筑筏形基础的分析。
In this thesis, a program for the form finding of the BSS is compiled with the APDL language used in ANSYS parametric design.
本文采用非线性有限元软件ANSYS的APDL语言，编制了张弦梁结构的找形程序。
Analyse the traveling wave induction launcher temperature field with the method of ANSYS electromagnetic analysis (thermal coupling module).
用ANSYS分析电磁——热耦合的方法，分析了行波发射器的温度场。
The results show that: in the homogeneous soil, the results of simulate using ANSYS is in line with the existing research.
分析结果表明在均质土下，用ANSYS模拟出的结果规律与现有的研究成果一致。
