bainitic
美 
英
例句
The dimension and dispersion of the precipitation decrease, the lath character of bainitic ferrite tends to be evident.
碳化物尺寸变小，弥散度减小，贝氏体铁素体条片状特征明显；
The microstructure of weld bead obtained by shielded metal arc welding are massive ferrite and a little pearlite, HAZ are lath bainitic.
手工电弧焊焊缝组织主要为块状铁素体和少量珠光体，热影响区组织为板条状贝氏体组织；
A boron-treated ultra low carbon bainitic steel was investigated by means of particle track autoradiography (PTA) technique.
用硼的径迹显微照相技术（PTA）研究了含硼超低碳贝氏体钢的热变形再结晶过程。
The results showed that the changes of mechanical properties of the samples are in accord with the changes of upper bainitic microstructure.
试样力学性能的变化与上贝氏体组织形态的变化相一致。
The structures and properties of bainitic steels with various carbon contents have been studied.
研究了不同含碳量贝氏体钢的组织与性能。
Carburization characteristics and wear behavior of new type meta bainitic steel were studied.
研究了新型准贝氏体钢渗碳特性及渗层磨损性能。
In this paper, notch sensitivity of a low-carbon bainitic steel under static load has been studied.
本文研究了回火温度对低碳贝氏体钢静载缺口敏感性的影响。
The effect of different cooling rate on microstructure and mechanical properties of new type bainitic steel were studied.
研究了不同冷却速度对新型贝氏体钢力学性能及组织的影响。
Effect of silicon on microstructure and properties of meta-bainitic carburizing steel were studied.
研究了硅对准贝氏体渗碳钢渗碳组织与性能的影响。
The impact abrasive properties of as-cast bainitic low-carbon ductile iron were investigated.
研究经准铸态贝氏体工艺处理低碳球墨铸铁冲击磨料磨损特性。
A new series of meta bainitic steels is founded by adding in appropriate amount of silicon on the alloying basis of bainitic steel.
准贝氏体钢是在贝氏体钢合金化的基础上添加适量的硅而组成的。
This steel is normally given a martensitic or bainitic heat treatment during which it is hardened to the range of 58 to 65 HRC.
这种钢材通常经过马氏体或贝氏体热处理，在此过程中被淬硬到58至65HRC的范围。
Structure and Mechanics Property of Welding Joints of a Special Welding Electrode for the Frog Made of Bainitic Steel
贝氏体钢辙叉专用焊条接头组织和力学性能
Formation and Wear Resistance of a New Cast Bainitic Steel Used in Manufacturing the Harrow Disk
农机耙片用新型铸态贝氏体钢的组织与耐磨性
Effect of the Original Microstructure on the Structure and Mechanical Properties of Austenitic-bainitic Malleable Iron by Austempering
奥-贝可锻铸铁原始组织对等温淬火组织及性能的影响
Influence of controlled rolling and controlled cooling technology on microstructure and performance of low-carbon bainitic steel
控轧控冷工艺对低碳贝氏体钢组织性能的影响
Influence of Austempering Processing on Microstructure and Mechanical Property of Austenitic-bainitic Cast Steel
等温淬火工艺对奥-贝铸钢组织和性能的影响
Mechanical Properties with Different Processing Techniques during Tempering in Ultra-Low Carbon Bainitic Steel Plates
不同工艺下超低碳贝氏体钢板回火过程中的力学性能
Effect of Heat Treatment on the Manual Are Welding Joint Microstructure and Properties of Wear-Resisting Plate of New Type Bainitic Steel
热处理对新型贝氏体耐磨钢板手工焊焊接接头组织与性能的影响
Study of Wear Resistance of a New As-Cast Bainitic Steel
新型铸态贝氏体钢的抗磨损性能研究
The Effect of the Silicon Content and Heat Treatment Parameters on the Structures and Properties of Low- alloying Austenitic- bainitic Steel
硅及热处理参数对低合金奥-贝钢组织与性能的影响
Mechanical properties of friction welding joint of non-quenching and tempering bainitic steel for super-strength sucker rods
超高强度抽油杆用非调质贝氏体钢摩擦焊接头的力学性能
To Improve the Properties of Quasi - bainitic Wear Resistant Plate by Means of TMCP Process
通过TMCP工艺改善准贝氏体耐磨钢板性能
Effect of Chemical CompoSition on the Microstructure and Mechanical Properties of Austenitic-Bainitic Cast Steel
化学成分对奥氏体-贝氏体铸钢组织与性能的影响
Study of RE-Ti Multi-modification on Grain Refinement of Bainitic Cast Steel
稀土、钛复合变质剂对贝氏体钢铸态晶粒细化的研究
Determination of CCT Curves and Characteristics of Microstructure of Testing Bainitic Rail Steels
试验用贝氏体钢轨钢连续冷却曲线的测定及组织特征
Influence of the Deformation System of Finish Rolling on the Microstructure and Property of Low-carbon Bainitic Steel
精轧变形制度对低碳贝氏体钢组织与性能的影响
Discussion of Important Questions on Applications and Manufacture of Bainitic Ductile Iron
贝氏体球铁生产应用中若干问题的探讨
Properties of a New Type Bainitic Steel for Automobile Leaf Spring
新型贝氏体钢汽车板簧材料的性能研究
Effect of Hot Rolling Schedules on the Transformation Behavior and Microstructure in Mn-Mo-Nb-B Ultralow Carbon Bainitic Steel
热变形工艺参数对超低碳贝氏体钢转变行为和显微结构的影响
Dynamic recrystallization of hot deformed austenite for microalloyed bainitic engineering steel
贝氏体非调质钢热变形奥氏体的动态再结晶行为
Investigation and Application of Air-Hardening Bainitic Cast Steel Free from Molybdenum and Nickel
无钼镍空淬贝氏体铸钢的研究与应用
Rigidity Trend Prediction for Bainitic Steels with Grey Gradient Optimization Model
贝氏体钢形变时硬度趋势预测的灰色坡度优化模型
Study of the platelike bainitic ferrite growth kinetics
片层状贝氏体铁素体长大动力学研究
Effects of SH modification agent on the microstructures and properties of air cooling bainitic cast steel
复合变质对空冷贝氏体铸钢组织和性能的影响
Development of New Weathering Steels of Extremely-low Carbon Bainitic Type with Excellent Weldability
焊接性优良的超低碳贝氏体新耐候钢的开发
Effect of Tempering on Stability of Microstructure and Mechanical Properties of Low Carbon Bainitic Steel
回火对低碳贝氏体钢组织稳定性及力学性能的影响
Low-carbon Bainitic Steel Carburizing and Its Application in Car Gear
低碳贝氏体钢渗碳工艺及在轿车齿轮上的应用
Spinodal-Like Decomposition During the Incubation and Early Stage of Bainitic Transformation in Some Alloys
贝氏体转变孕育期及初期的类调幅分解
In this paper, the effect factors that affect the stability of retained austenite in austenitic-Bainitic Ductile Iron were studied;
本文着重研究了奥—贝球铁残余奥氏体的稳定性及其影响因素；
