bootloader
美 
英
例句
Generally, none of these consoles can boot Linux directly, so the assistance of an intermediary bootloader is required.
一般来说，这些控制台都不能直接引导Linux，因此需要一个中间引导装载程序。
Note that this only installs the bootloader, not the operating system.
请注意这只安装了引导程序，而没有安装操作系统。
The bootloader is usually the first piece of code that will be executed on any hardware.
引导装载程序通常是在任何硬件上执行的第一段代码。
All this information is passed in parameter form from the bootloader to the kernel.
所有这些信息都以参数形式从引导装载程序传递到内核。
To make your Debian GNU Linux system bootable, set up your boot loader to load the installed kernel with your new root partition.
要让您的DebianGNULinux系统能够启动，还要设定您的bootloader，好让它能已安装的核心并用上新的根分割区。
All the BIOS really had to do was load that first chunk of code (called the bootstrap loader, or bootloader) and let the machine run.
BIOS实际上需要做的事情是加载第一段代码（称为引导加载程序（bootstraploader）或bootloader），并让机器开始运行。
Once the bootloader is installed in the flash of the target , it performs all the initializations we mentioned before .
一旦将引导装载程序安装到目标的闪存中，它就会执行我们上面提到的所有初始化工作。
After the kernel is fully loaded to the target, the bootloader passes control to the address where the kernel was loaded.
在将内核完全装入目标后，引导装载程序将控制传递给装入内核的地址。
Embedded Linux development broadly involves three tiers: the bootloader, the Linux kernel, and the graphical user interface (or GUI).
嵌入式Linux开发大致涉及三个层次：引导装载程序、Linux内核和图形用户界面（或称GUI）。
Before feel simple parallel port JTAG board is too slow, especially when debugging Bootloader, simply intolerable.
以前总觉得简单的并口jtag板速度太慢，特别是调试bootloader的时候，简直难以忍受。
After the distribution has been installed, or once done using the system utility, the modification to the bootloader is then undone.
分配后，已安装了，还是做一次使用该系统的实用程序，该修改的开机程式，然后泼水。
The boot loader loads your kernel for you, regardless of filesystem.
Bootloader可以文件系统无关地为你装载内核。
There are two ways to pass parameters from bootloader to kernel: parameter_structure and a tag list.
将参数从引导装载程序传递到内核有两种方法：parameter_structure和标记列表。
The bootloader communicates with the host using the serial, ESB, or ethernet port to transfer the kernel into the target's flash or DRAM.
通过使用串行、USB或以太网端口，引导装载程序与主机通信以将内核传送到目标的闪存或DRAM中。
Boot: Select which partition you want Grub to boot when you're installing the bootloader.
启动：在你安装启动引导程序的时候要选择你想要Grub启动的分区。
For its bootloader, this image uses SYSLINUX, which works better with older, more outdated machines.
对于引导装载器来说，这个映像使用了SYSLINUX，它在一些早期的机器上可以更好地工作。
This poses an interesting question: who loads the bootloader onto the embedded devices, which (in most cases) don't have BIOS?
这就提出了一个有趣的问题：谁将引导装载程序装入（在大多数情况中）没有BIOS的嵌入式设备上呢？
The bootloader then needs to have some code to load the remaining bootloader code from NAND before executing itself.
引导加载程序在执行前需要一些代码从NAND加载剩余的引导加载程序代码。
You must study and choose from a variety of options for everything from the bootloader and distribution to the filesystem and GUI.
您必须学习并从引导装载程序和分发版到文件系统和GUI中的每一个事物的各种选项中作出选择。
As your boot loader the small program which runs the operating system kernel.
作为您的bootloader运行操作系统内核的小程序。
The host programs or loaders can then use this connection to transfer the bootloader onto the target, where it is written to flash.
然后，主机程序或装入程序可以使用这个连接将引导装载程序传送到目标上，并将它写入闪存。
The prompt at the end of the output is from the second-stage bootloader, waiting for instructions on how to load the operating system.
输出末尾的提示来自第二阶段引导装载器，它等待关于如何装载操作系统的指令。
Grand designed a static serial bootloader into the badge to allow people to load their own programs and firmware into the badge.
大徽章设计成一个静态的串行引导，让人民来加载自己的方案，进入徽章固件。
If the Bootloader on the Nexus One has already been unlocked, you may skip this section.
如果启动引导程序已被解锁，就可以跳过这一步。
If you miss the bootloader the device will not boot as there is no OS.
如果你错过了引导程序的设备将无法启动，因为没有操作系统。
Once the kernel is loaded, the bootloader transfers control to the kernel.
一旦装入了内核，引导装载程序就将控制转给内核。
The first step of the installation is to install a new bootloader.
安装的第一个步骤是安装一个新的引导加载器（bootloader）。
Once all is done you just need to reboot your Mac and select 'Linux' from the REFit bootloader when it appears.
所有都完成后，你只需要重启你的Mac，从REFit引导工具中选择“Linux”。
In this paper, the Bootloader in DSP system and the flash ROM operation method are introduced.
介绍DSP系统对FLASH存储器的操作方法和用户程序引导；
The Beagle Board's firmware contains a first-stage bootloader called X-loader.
BeagleBoard的固件包含一个名为X-loader的第一阶段引导装载器。
WARNING: UNLOCKING THE NEXUS ONE'S BOOTLOADER WILL VOID THE WARRANTY.
解锁启动引导程序将导致你的保修无效。
Knowing how to install the Grub bootloader onto your main hard drive can get you out of all sorts of tricky problems.
知道如何在你的主硬盘安装Grub启动引导程序将会摆脱各种难缠的问题。
There is a big difference between the implementation of dual core processor's bootloader and one core processor's bootloader.
双核启动加载器程序的实现方法与单核启动加载器程序的实现方法有较大的差异。
If you want to fix it, you should first put grub on the external drive, then put Windows' bootloader back on the internal drive.
如果你要解决这个问题，你应该首先把grub移入外部硬盘，接着恢复内部硬盘中的Windows启动加载器。
First, make sure that the bootloader configuration has entries for both the new kernel and the old, working 2. 4 Kernel.
首先，确保启动程序可以新内核和旧内核（2.4内核）启动。
Most simply, a boot loader loads the operating system.
最简单地讲，引导加载程序（bootloader）会引导操作系统。
To install the bootloader, you first need to transfer these files to the iPAQ.
要安装引导加载器，您首先需要将这些文件传输到iPAQ上。
If you are stucked in bootloader or in windows screen, this will not work!
如果你是在引导stucked或Windows屏幕，这将无法正常工作！
The specific framebuffer video mode at boot time is set by parameters passed to the kernel by the bootloader, kboot.
这个引导时特定的framebuffer视频模式可以通过引导启动程序kboot传递给内核的参数进行设置。
It will unlock 1. 1. 2 firmware with the new 4. 06 bootloader .
这个卡贴采用新的4.06引导装入系统可以给1.1.2版本的固件解锁。
