box-shaped
美 
英
英汉解释
例句
Box-shaped structure built with telescopic cylinders, lifting devices, hydraulic cylinder amplitude can be achieved.
箱形结构内装有伸缩油缸，起重装置的变幅可通过液压缸实现。
The battery pack has a hard outer jacket member, a box-shaped or plate-shaped battery element, a cover, and a circuit board.
容纳在外壳部件中并具有连接到电路板的电极端子导线的盒形或板形的电池元件；
A box shaped car or truck has to exert more force to move through the air causing more stress on the engine making it work harder.
一个方框形汽车或卡车已施加更大力量将通过空气造成更多的压力使发动机更加努力地工作。
A leg restoring device is installed around each leg at the top of the box-shaped steel frame.
一条腿恢复设备安装大约每腿在顶部的盒形钢架。
His most famous home is the Fisher house near Philadelphia. It is made of several box-shaped buildings.
他最出名的民房当属费城附近的钓屋，它由数幢箱形楼房构成。
The home consists of four equal, box - shaped structures, constructed from wood and clad in corrugated metal .
在家由四个平等，盒形结构，建造木材和金属包层的波纹。
The thinning ratio of the box-shaped products reduces with the increase of cushion time.
盒型件的减薄率随缓冲时间的增大呈减小趋势。
A four-wheeled, open, box-shaped wagon or iron car run on tracks in a coal mine.
矿车、煤车煤矿中在轨道上行驶的四轮、开口、盒状的运货车或铁制车厢
a small box-shaped passenger van; usually has removable seats.
一种盒式的小型客车；通常含有抽取式座位。
This paper, using a telescopic, box-shaped structure.
本文中，采用了伸缩式、箱形结构。
Humans running geometry that is box shaped or pyramidal will tend to draw a dark earth dream to one's life dance.
运作盒状或金字塔状几何学的人类，将倾向于在生命之舞中驱动黑暗地球梦想。
The Method for the Estimation of Motions of Box-shaped Buoyant Bulls in waves and Its Application in the Engineer
箱形浮体在波浪上运动的特性计算方法及其应用
Construction Techniques of Long-span Concrete-filled Steel Tubular Box-shaped Vault Rib Subsection Prefabrication
大跨度钢筋砼箱形拱肋分段预制施工技术
Construction technique on jacking of box-shaped structure under railway track in multiple adverse condition
多种不利因素叠加地段线路架空箱桥顶进施工技术
Design of the Sequentially Opened Hot-Runner Stacked Injection Mould for Shallow Box-Shaped Parts
浅盒形件顺序开模热流道叠层式注射模设计
Safety management measures during jacking of box-shaped structure crossing existing railway
既有线顶进立交桥的施工安全管理措施
Design of Injection Mold for Plastics Spare Parts of Box-Shaped of Three Surfaces Apart Each Other
盒形塑件三分型面注射模的设计
Analysis on causes of crack in certain box-shaped structure and its remedy measures
某框架桥裂缝原因分析与处理
Construction technique for jacking of new box-shaped structure and demolishing of old one
顶进新桥同时拆除既有桥施工技术
Jacking of a Box-shaped Frame Bridge under an Existing Railway
道路下穿既有铁路箱形框架桥顶进法施工技术
Analysis and Measure to Generation of Wrinkle during Warm Deep Drawing of Box-shaped Magnesium Alloy Product
镁合金盒形件温拉深起皱原因分析及措施
Analyses of Stresses and Force Transmission Route in Box-Shaped Anchorage Zone for Cable-Stayed Bridges
斜拉桥锚箱式索梁锚固区应力及传力途径分析
Research on Stress Conditions of Box Shaped Supporting Beam before and after Reinforcement in the Huangtankou Hydropower Station
黄坛口水电站支承梁加固前后的应力研究
Design of track reinforcement at construction of box-shaped culvert with top slab in the turnout section
在道岔区建造盖板箱涵的线路加固设计
Exhaust of Combustible Airflow of Box-Shaped Structure Vertical Launch System
箱式垂直发射系统燃气流的排导
Mechanization Construction of Large Scale Box-shaped Concrete Beam for Casting on Site
大型现浇箱梁混凝土的机械化施工
Design and Construction of Box-shaped Beam Supported Frame in Beam-type transfer Store
梁式转换层中箱形框支梁的设计与施工
Study of parametric CAD system of box-shaped machine parts
箱体类零件参数化CAD系统的研究
Calculation of the Blanks of Low-walled and Box-shaped Drawing Parts
矮壁盒型拉深件毛坯计算
Application of the Drawing Rib in Forming of the Box-Shaped Parts
拉伸筋在盒形件拉伸成形中的应用
Design of the Die for Piercing the Non-Circular Hole in the Curved Surface of the Box-Shaped Part
盒形件圆弧曲面上非圆形孔冲模设计
Stability analysis of tied arch bridge with steel box-shaped arch-ribs
钢箱拱肋系杆拱桥的稳定分析
Injection Mould Design of Three Times Parting of Box-shaped Part
盒形塑件三分型面注射模设计
Application of CAE Technology in Box-Shaped Drawing
CAE技术在盒形件拉深的应用
The Hanging Trimming Die for Box-Shaped Drawn Parts
盒形拉伸件悬挂式切边模
Box shaped module open on two sides
两侧被打开的盒形组件
