carburization

carburization

美 [kɑrbjʊraɪ'zeɪʃən] 　英 [kɑ:bjʊraɪ'zeɪʃən]

• n.碳化；渗碳处理；增碳；作用
• 网络渗碳作用；渗碳法

英汉解释

n.	1. 渗碳处理 2. 碳化 3. 增碳 4. 作用

例句

The carburization rate can be increased 20% compared with the conventional carburization process by using RE catalyzed carburizing.

采用改进型稀土催渗剂进行渗碳后，与常规渗碳工艺相比提高渗碳速度20%；

The valid controlution of carburization atmosphere during the later stage of Sintering-HIP can directly prepare gradient cemented carbides.

气压烧结后期有效地控制渗碳气氛能够直接烧结渗碳制备梯度硬质合金；

The principle and method of determining carburization reaction coefficient using steel -- foil method was discussed.

论述了用钢箔法测定渗碳反应系数的原理和方法；

Carburization characteristics and wear behavior of new type meta bainitic steel were studied.

研究了新型准贝氏体钢渗碳特性及渗层磨损性能。

It is wrong to think that the content of iron has already been saturated and is not telated to the process of carburization .

过去那种认为高炉生铁含碳量已经达到饱和并与铁水渗碳过程无关的看法是不正确的。

Establishment and Application of Carbon Profile Mathematical Model Describing High-Carbon-Concentration Deep-Carburization Process

高浓度深层渗碳碳分布数学模型建立与应用

Case-carburization Numerical Modeling and Craft Optimization on Steel Parts of Various Shapes

不同形状钢件表面渗碳扩散过程数值模拟

Application of Gas Carburization on the Heat Treatment of Refractory Forming Die

气体渗碳在耐火材料模具热处理中的应用

Defective Carburization of Diesel Engine Components and its Countermeasure

柴油机零件气体渗碳缺陷分析及对策

Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws and Studs

测定硬化和回火螺纹钢螺栓，螺钉和螺柱螺栓的脱碳和渗碳的试验方法

On Technological Flaw of Carburization and Its Precautionary Measures

浅谈渗碳工艺缺陷及预防措施

the layer thickness increases with the elevation of carburization temperature and the protraction of heat preservation time;

提高渗碳温度及延长保温时间将使渗层厚度逐渐增加；

The Test of Process Parameter for Microcomputer Controlling Well-shaped Carburization Electric Furnace

微机控制井式渗碳电炉工艺参数试验

The Kinetics of Increase in Surface Carbon Concentration during Gas Carburization

气体渗碳过程中表面碳浓度增长动力学研究

Standard Practice for Evaluation of Metals Exposed to Carburization Environments

金属暴露在碳化环境中的评定

Surface Treatment Technology for Improving Anti-carburization Property of Metal

提高金属材料抗渗碳性能的表面处理技术

The Preparation of Gradient Materials Sample for Uniformity Carburization

均匀渗碳梯度材料试样的制备研究

The Multi Goal Optimal Model Analysis of Quench or Carburization Quench Steel Gear Wheel Transmission

淬火或渗碳淬火钢齿轮传动多目标优化模型分析

Computer Simulation of Solid Carburization and Diffusion Annealing of High Alloy Steels

高合金钢固体渗碳及渗层扩散的计算机模拟

Study of the Kinetic of Gas Carburization

气体渗碳动力学的研究

Reasons and Removal Method for Network Carbide Forming During Carburization of Large Gear

大型齿轮渗碳时网状碳化物形成的原因及消除的方法

Computer Simulation of Super-saturated Solid Carburization of High Alloy Steels

高合金钢过饱和固体渗碳的计算机模拟

Analysing carburization process and material

渗碳及渗碳材料分析

The New Technology of Variable Temperature and Low-pressure Carburization

变温低压渗碳新技术

Research on the Wear Resistance of Stainless Steel by Plasma Carburization Process

不锈钢离子渗碳耐磨性的研究

Research on the methods to reduce the deformation of carburization and hardening gear

减小渗碳淬火齿轮变形方法探讨

The Improvement of Carburization Quench Technology in Tooth Board

牙板渗碳淬火工艺的改进

Method to Reduce Face Grinding Cracks of Quench-Hardened Gears in Carburization

减少渗碳淬硬齿轮端面磨削裂纹的途径

New process of alkaline non-cyanide copper plating for preventing carburization

防渗碳碱性无氰镀铜新工艺

Review of Carburization Corrosion and Protection of Metal Materials

金属材料的碳化腐蚀及防护研究进展

rare earth high carbon potential carburization of firebrick die

耐火砖模具的稀土高浓度渗碳

Application of BH carburizer into gear carburization

BH催渗剂在齿轮轴渗碳中的应用

Waterproof and Fireproof for Gas Carburization Stove

井式气体渗碳炉的防水与防火

Research about Carburization on High Chrome Alloy Surface

高铬合金表面渗碳研究

Pasty Carburizing Technology and the Effect of Post-Carburization Heat Treatment on Wear-Resistance of the Carburized Layer

膏剂渗碳工艺及渗后热处理对其渗层耐磨性的影响

Study on Technology for Carburization of High Quality Coarse-Grained WC

优质粗晶WC碳化工艺研究

Gear has passed quenching and grinding of carburization

齿轮通过渗碳淬火、磨齿等工艺精制

Catalytic Effect of Cerium Oxide on Carburization of Steel

氧化铈在钢表面气相渗碳时的催化作用

FEM analysis on the gear carburization process

齿轮渗碳过程的有限元分析

Influence of Rare Earth on Gas Carburization of Steel

稀土对钢气体渗碳的影响