castings
美 [ˈkæstɪŋ] 
英 [ˈkɑːstɪŋ]
- n.铸件；【冶】铸造；投；计算
- v.“cast”的现在分词
- 网络铸造物；铸铁；铸造件
词形变化
复数：castings 同义词
英汉解释
英英解释
例句
The temperature of the lead should be such that it is just enough to produce satisfactory castings in a heat-stabilized mold.
铅液的温度要正好适宜于在热稳定的模具中铸出合格铸件。
The inner surface of this kind of workpiece castings is often protected against corrosion with a special coat.
这种铸件的内表面通常使用一种特殊涂层保护以抵抗腐蚀。
The experiment results had been used in practical production of the liners, and the quality of the castings had been obviously improved.
该试验结果已应用于衬板的实际生产中，并且铸件的质量得到明显的提高。
The abnormal structure usually appears at the surface layer of nodular iron castings produced by furan-sulfonic acid cured sand mold.
本实验研究查明，当用甲苯磺酸作催化剂的呋喃树脂自硬砂生产稀土镁球铁件时，通常在其铸件表层出现异常组织。
The worm's waste, or castings, should be ready to use as compost within two to six months.
两到六个月内，蚯蚓的排泄物就能够作为堆肥使用了。
The surface quality of the moulding shell is the key factor influencing the surface quality of precision castings.
影响精铸件表面质量的关键因素是型壳表面的质量。
A small apparatus used for simulating cooling environment of heavy section ductile iron castings was developed by authors themselves.
自行研制了模拟厚大铸件的冷却环境的小型凝固装置。
Objective : To determine an ideal finishing and polishing procedure on the surface of chromium-cobalt castings.
目的：确定合理的钴铬合金铸件表面研抛程序。
The company mainly produces gray iron, ductile iron, compacted graphite cast iron, heat, cold and corrosion-resistant special castings.
本公司主要生产灰口铸铁、球墨铸铁、蠕墨铸铁、耐热、耐冷及耐腐蚀等特种铸件。
Some experience working with foundries and die castings would be very beneficial.
有铸造和拉模铸造的经验将会有益。
This standard specifies the general technical requirements of carbon steel castings for general engineering purposes.
本标准规定了一般工程用铸造碳钢件的通用技术条件。
The molten steel quality is one of the influential factors for the product qualification ratio of steel castings.
钢水质量是铸钢件产品合格率的重要影响因素之一。
The paper introduces such a line to produce shell - moulds of small and medium - sized castings of grey iron for motors.
本文介绍了这样一条用于生产汽车灰铸铁中小件的壳型铸造生产线。
They used to be concerned only with heavy metal castings, but have now branched out into light alloys and plastics.
他们本来只经营重金属铸件，但现在已发展到经营轻合金和塑料了。
Inoculation effects of RE-containing inoculant used for cylinder castings of piston rings was studied.
研究了稀土复合孕育剂在灰铸铁筒体活塞环中的孕育效果。
Castings and forgings and hydrogen brittleness sensitivity to the spare parts of the appropriate USES weak acid galvanizing.
铸锻件和对氢脆敏感的零件宜用弱酸性镀锌液。
Heat solder joints only to the point were solder will flow properly. Excessive heat may distort brass castings.
热焊料连接只能用在焊料能够正确流动的地方。过热可能扭曲黄铜铸件。
The reasons causing EPC castings to be deformed in ever procedure during production process and measures to avoid deformation was described.
介绍了在消失模铸造生产的各道工序中铸件产生变形的原因以及防止变形的方法。
These alloys are used for welding and brazing filler materials and for sand and die castings.
这些合金用于定位焊接和铜焊（硬钎焊）的焊料，和用做打磨或模铸。
The castings industry usually is reputed as "mother of the industry" , and its status is quite important.
铸造产业素来享有“工业之母”的称号，在国民经济中占着相当重要的位置。
Various kinds castings of ductile iron, gray cast iron and alloy cast iron (Main Product is all kinds of elevator fittings).
各种牌号的灰铸铁、球墨铸铁、合金铸铁件（主要产品有各类电梯配件等）
The national standard is the general standard of ultrasonic testing for steel castings.
本标准系铸钢件超声探伤的通用标准。
This joint is composed of a RSPB, a pin shaft and steel castings, which is too complicated to be analyzed by traditional methods.
该节点由向心关节轴承、销轴、铸钢件等部分组成，构造复杂，无法用常规方法确定其承载力。
The results show that the optimum technology can ensure the progressive solidification of the castings and eliminate shrinkage and porosity.
结果表明，该优化工艺实现了铸件的顺序凝固，消除了缩孔、缩松。
Keeping the compatibility of the process parameters can control the dimensions of the bridge bearing castings within the tolerance limits.
保持工艺参数的一致性，才能将铸件尺寸控制在要求的公差范围以内。
High quality heavy steel castings produced by our company are used for equipments of smelting , steel rolling , forging and pressing etc.
我厂生产提供冶炼、轧钢、锻压等设备用的优质大型铸钢件。
Investment castings(Steel, Aluminum alloy, Copper alloy), Parts of Machining and Surface treatment.
精密铸造产品（铸钢、铝合金、铜合金）及其机械加工与表面处理。
Castings and forgings shall be so designed and manufactured that shall be free from defects.
铸、锻的设计和加工不应出现缺陷。
Sometimes, cementite could be found in the hot spots or the last solidifying location of the RE-Mg nodular iron castings.
前言：铸态稀土镁球铁铸件热节或最后凝固部位有时会出现渗碳体，因而被称为“反白口”。
Production practice showed that such process is quite effective for those castings with high outer surface quality requirement.
由生产实践证实，对于这类外观质量要求严格的铸件，平做立浇是一种有效的工艺方案。
Two of the closures had been previously announced, including a castings factory in Massena, N.
其中两起关闭在之前已经被宣布过，包括一个在纽约Massena的铸件厂。
The defects that easy occurred in heavy section ductile iron castings as well as the prevention measures were reviewed.
概述了厚大断面球墨铸铁件易产生的几种缺陷及防止措施。
The fourth one is the keystone of this article, dissertated the strategic plan and strategic selection of Chinese castings industry.
第四章是本文的重点，论述了中国铸造产业的战略规划和战略选择。
Computer simulation showed that the cooling rate of castings can be reduced by such method.
计算机模拟表明，这种工艺方法还可以降低铸件冷却速度。
The results show that the complicated and precise Al alloy castings produced by the technology can satisfy technical requirement.
实践证明，用该方法生产的复杂薄壁铝合金铸件，能够满足技术要求。
During ultrasonic testing heavy castings, the procedure must be severely prepared and controlled.
超声波检测大型铸件时，应制定严格的检测工艺并加以控制。
Castings may be welded or reshaped by grinding to repair chips and cracks as long as the repair is blasted to blend in the appearance.
铸件的破损或裂缝可以通过焊接或打磨重塑的方法修复，只要修复处经过处理与外表浑然一体就可以。
The authors have studied and developed a differential inductive sensor, by which some actual castings have been measured. The me. . .
作者研制了差动式电感传感器，对实际铸件进行了测试，测试结果与理论分析计算一致。
steel , nickel base and cobalt base alloy remelting stock and castings - technical specification - pre - production and production castings.
钢镍基合金及钴基合金重熔坯料和铸件。技术规范。试制铸件和产品铸件。
By reasonable use of kiss riser, high g quality of these castings and higher casting yield can be obtained.
合理使用压边浇冒口，有效地提高了有色合金铸件的质量和工艺出品率。
