cold-drawn
美 
英
- adj.(金属丝等)冷抽的；(油等)冷提的
- 网络冷拉；冷拉的；不加热抽取
英汉解释
例句
Experiment results show that removing the surface broken crystal layer of the cold drawn rod can prevent heat treatment induced cracks.
实验结果表明，热处理前去掉冷拉棒表面的碎晶层可以防止它在热处理过程中产生裂纹。
Round steel stock used in the production of rollers; cold drawn to a specified diameter and wound in the form of coils.
生产滚子用的圆形钢盘，冷拔加工特定直径并且卷成盘状。
With the said process, cold-drawn precision seamless steel tubes up to relevant ap. . .
已按此工艺生产出满足使用要求的冷拔精密无缝钢管。
Surface quality of cold drawn square steels and hexagons shall be in accordance with steels use for cutting steels.
冷拉方钢、六角钢表面质量按切削加工用钢材的规定。
Aluminium and aluminium alloys - Cold drawn, round, coiled tube for general applications - Specification.
铝及铝合金.通用冷拉制圆盘管.规范
SELECTION OF COLD DRAWN SEAMLESS STEEL TUBES OF CIRCULAR CROSS-SECTION FOR THE AEROSPACE INDUSTRY.
耐热钢和钢合金半成品冷拉无缝圆钢管.航空和航天工业选用
The paper compared anchoring properties between cold-rolled reinforced bars and cold- drawn wires.
本文对冷轧螺纹钢筋与冷拨钢丝的锚固性能进行了比较；
Described in the paper is the processing technique for hi-finish dies for high- precision cold-drawn steel tube.
介绍了用于冷拔高精密钢管的高光洁度模具的加工工艺试验情况。
Steel tubes for precision applications - Technical delivery conditions - Part 1 : seamless cold drawn tubes.
精密装置用钢管.交货技术条件.第1部分：无缝冷拉管
Steel tubes for precision applications - Technical delivery conditions - Part 2 : welded cold drawn tubes.
精密装置用钢管.交货技术条件.第2部分：焊接冷拉管
Steel wire and wire products - Steel wire for ropes - Part 2 : cold drawn non alloy steel wire for ropes for general applications.
钢丝和钢丝产品.绳索用钢丝.第2部分：一般绳索用的冷拉非合金钢丝
Steel wire for mechanical springs - Part 1 : patented cold drawn unalloyed spring steel wire.
机械弹簧用钢丝.第1部分：铅淬火冷拉制非合金弹簧钢丝
In order to reduce weight and reduce the amount of turning, pump shaft is a high-quality carbon steel cold-drawn steel park.
为了减轻重量和减少车削量、泵轴是优质碳素钢冷拉园钢制造。
The stress corrosion of cold drawn prestressed steel wire hasn't been paid full attention to for a long time.
长期以来，冷拉预应力钢丝的应力腐蚀问题并未引起人们的足够重视。
Analysis of the Surface Defects in Cold-drawn Ni-Cr Alloy Bars
冷加工镍-铬合金棒材表面缺陷分析
Steel tubes for precision applications - Technical delivery conditions - Seamless cold drawn tubes for hydraulic and pneumatic power systems
精密仪器用钢管.技术交货条件.液压和气动系统用无缝冷拉管
Steel tubes for precision applications - Technical delivery conditions - Welded cold drawn tubes for hydraulic and pneumatic power systems
精密仪器用钢管.交货技术条件.液压和气动动力系统用焊接冷拉管材
Standard Specification for Cold-Drawn, Stress-Relieved Carbon Steel Bars Subject to Mechanical Property Requirements
有机械性能要求的消除应力的冷拉碳素钢棒
Compression ignition engines - Steel tubes for high pressure fuel injection pipes - Requirements for seamless cold drawn single wall tubes
压燃式发动机.高压喷射燃油管用的钢管.无缝冷拔单壁管的要求
Chromium-nickel-aluminium corrosion resisting steel (precipitation hardening) rod, cold drawn wire and springs
铬镍铝耐腐蚀钢（沉淀硬化）棒材、冷拉线材和弹簧
Steel tubes for precision applications - Technical delivery conditions - Seamless cold drawn tubes
精密仪器用钢管。交货技术条件。无缝冷拔钢管
Study of Application of Cold-drawn Prestressed Wire in Manufacturing of Concrete Waterconveying Pipe
在混凝土输水管中使用预应力冷拉钢丝的研究
Microstructure Evolution and Mechanical Properties Transform in Cold Drawn Pearlitic Steel Wires
冷拉珠光体钢丝的组织演变及性能变化
Steel tubes for precision applications - Technical delivery conditions - Welded cold drawn tubes
精密仪器用钢管.交货技术条件.焊接冷拔钢管
Experimental Research on Bonding and Anchoring Performance of Cold Drawn Spiral Reinforcement
冷拔螺旋钢筋粘结锚固性能试验研究
Specification for precision finished seamless cold-drawn low carbon steel tubes for use in hydraulic fluid power systems
液压动力系统用精密无缝冷拔低碳钢管规范
The Derivation and Proving of the Formula of Coefficient of Elongation for Cold-drawn Outer-spiral-fin Tube
冷拔外螺纹铜管延伸系数计算公式的推导及验证
Computerized Dynamic Control and Management of Production & Marketing of Cold-drawn Steel Tubes
冷拔管产销微机动态控制与管理
Standard Specification for Seamless Cold-Drawn Carbon Steel Tubing for Hydraulic System Service
液压系统设备用冷拉碳素无缝钢管
Research Present Situation of Severely Cold Drawn Plastic Deformation Pearlite Steel Wire
剧烈冷拉塑性变形珠光体钢丝研究现状
Standard Specification for Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes
热交换器和冷凝器用无缝冷拉低碳钢管
Production Characteristics and Application Prospect of Cold-drawn Steel Wire for PC Pipelines
预应力混凝土管道用冷拉钢丝的生产特点和应用前景
dimension , shape , weight and tolerance for cold - drawn round , square and hexagonal steels
冷拉圆钢方钢六角钢尺寸外形重量及允许偏差
Steel wire and wire products - Steel wire for ropes - Cold drawn non alloy steel wire for ropes for general applications
钢丝和钢丝产品.绳索用钢丝.一般绳索用的冷拉非合金钢丝
The Experience Relationship between Fin-height and Rough Tube Wall-thickness for Cold-drawn Outer-spiral-fim Tube
冷拔外螺纹铜管凸筋高度与坯料壁厚之间的经验关系式
specification for seamless cold - drawn carbon steel feedwater heater tubes
无缝冷拉碳素钢给水加热器管规范
Experiment on Manufacturing Process of Cold-drawn Heavy-wall Seamless Steel Tube for Blast Furnace Service
高炉用冷拔厚壁无缝钢管的生产工艺试验
Specification for patented cold drawn carbon steel wire and springs (high duty ground wire)
韧化处理冷拔碳素钢丝和弹簧规范（重载磨制钢丝）
Effect of Carbon, Silicon and Manganese Content on Mechanical Properties of Low Carbon Cold Drawn Steel
碳、硅、锰含量对低碳冷拔拉丝钢力学性能的影响
Technical requirements for quality structural steel cold drawn bars
优质结构钢冷拉钢材技术条件
