cold-forging

cold-forging

美 　英

• n.冷锻

英汉解释

n.

1. 冷锻

例句

Examination of the test piece shall not reveal surface defects likely to prove detrimental in cold forging.

测试部分的检测不会显示出可能在冷锻造中证明有损害的表面瑕疵。

HEADER MACHINE : Cold forging machine used to produce rollers.

镦头机：用于生产滚子的冷锻设备。

Forming process of cpu fin was analyzed in detail and effective way of forming was put forward. Semi-enclosed cold forging was designed.

分析了CPU散热片的成形工艺，并制定出有效的成形工艺：半封闭式冷模锻，开发出结构独特的模具。

HIGH SPEED HEADER : Newer type of cold forging machine which produces rollers at a faster rate than the old style machine.

高速镦头机：具有比旧式镦头机更快滚子加工速度的新型冷锻设备。

To plastic metal forming industry in Taiwan, cold-forging and progressive stamping process is a new technology.

板材冲锻成形制程对国内塑性成形业者而言，为一新制程、新技术；

In this paper, the author discusses the feasibility of precise cold-forging and optimizes the project for ball head.

探讨了球头精锻的可行性，对工艺方案进行优化。

This paper deals with numerical simulation of cold forging forming of spur gear.

本文对圆柱直齿轮冷锻成形进行数值模拟分析。

SHANGHAI DONGFU COLD FORGING MANUFACTURE CO. , LTD.

上海东芙冷锻制造有限公司。

The cold forging of Tibetan armour is the typical example.

藏族铠甲片的冷锻就是典型的例子。

The bevel gear's cold forging die was designed based on the principles of cold precision forming.

基于冷锻成形原理，对锥齿轮冷精锻模进行了设计。

Study on microstructure and properties of closed -die cold forging of bevel gear used in case of automobile differential

闭塞冷锻轿车差速器行星齿轮组织性能研究

The company has Japan and Taiwan high-speed cold forging machine;

公司拥有日本台湾高速冷锻机；

Electrical machinery pole shoe cold forging forming three dimensional finite element simulation and craft optimization

电机极靴冷锻成形三维有限元模拟和工艺优化

Study on Surface Hardening of Cold-forging Dies Made of Matrix Steel

基体钢制冷作模具表面强化研究

Conceit and technical study on manufacturing integral motor commutator by one cold forging procedure

电机换向器整体冷锻构想与工艺研究

Research on Web-based Cold Forging Technology Design and Its Implementation

基于Web的冷锻工艺设计的研究与实现

The Combination of Hard Alloy Cold-forging Hex Nut Die and Its Manufactures Technique

硬质合金组合镦六角凹模及其加工工艺

Structure Optimization of Cold Forging of Die Manufacturing Integral Motor Commutator

电机换向器整体冷锻凹模的结构参数优化

Application and its trend of finite element method in analyzing cold forging die

有限元法在冲压模具分析中的应用及展望

A New Spheroidal Annealing Technology for a Cold-Forging Steel of Low Carbon

一种新的低碳冷镦钢的球化工艺

Subzero Treatment of Cold-Forging Die Made of High Speed Steel and It's Application

高速钢冷作模具深冷处理及应用

Technological Investigation into Substitution of Low Carbon Steel for Some Cold Forging Steel

用普通低碳钢代替部分铆螺钢的工艺研究

Numerical simulation of cylindrical bevel gear cold forging with shape similarity method

形状相似性法的圆柱斜齿轮冷锻数值模拟

Technology improvement and numerical simulation of the cold forging of gear

齿轮冷锻成形的工艺改进及数值模拟

Experimental Study on Precision Cold Forging of Bevel Gear Used in Car

轿车直齿圆锥齿轮冷精锻试验研究

Forming pressure calculating of integral motor commutator cold forging

电机换向器整体冷锻变形力的计算

State of the Art and Advance of Cold Forging Technology

冷锻技术的发展现状与趋势

Failure Analysis of the Cold-forging Dies for Bearing Roller and the Improvement method

冷镦轴承滚子模具失效分析及改善方法

Introducing Cold Forging-capable High-Strength Titanium Alloy

可实现冷间锻造的高强度钛合金的介绍

Research on Feature-Based And Object-Oriented Cold Forging Product Modeling

基于特征和面向对象的冷锻件产品信息建模研究

The Hot Forging-Cold Forging Combined Plastic Forming Technology

热锻-冷锻复合塑性成形技术

Design of the Precision Cold-Forging Mould for Motor's Starting Gear

摩托车起动齿轮精密冷锻模具设计

Stainless and Heat-Resisting Steel Wire and Wire Rods for Cold Heading and Cold Forging

冷镦和冷锻不锈钢和耐热钢丝

Applying the transfer unit to the cold forging forming process of the CPU fin

机械手在CPU散热片冷锻成形过程中的应用

On constructional system of technological knowledge for cold forging

再论冷锻工艺知识结构体系

Status Comparison of Cold Forging Industry between China and Japan

中日冷锻工业现状的比较

Research on Performance Change After Closed-Die Cold Forging of Bevel Gear

圆锥齿轮闭塞冷锻后的性能变化规律研究

Coupled thermo-mechanical FE analysis of closed-die cold forging

闭式冷锻机械热力偶合有限元分析

Cold Forging Technology and Mold Design for Hexad Convex Socket Head

六凸面套筒冷模锻工艺及模具设计

Forming Process of Cold Forging and Die Structure for Irregular Forging

异形触指冷镦成形工艺及模具结构