fea
美 
英
- 网络有限元分析(Finite Element Analysis)；有限元素分析；有限元分析法
例句
By means of FEA, it is concluded that the stress relief groove with an elliptical generatrix has the best effect of stress relief.
通过有限元计算与分析，得到应力释放效果最好的是母线为椭圆线的减应力结构。
The vertebral body of the FEA model consisted of a solid tetrahedral core of trabecular bone surrounded by a cortical shell.
椎体的有限元模型包括了坚实的四面体核心，骨小梁周围有皮质外壳。
Finite element analysis (FEA) of filament wound composites is the foundation of mechanical research and application of these materials.
缠绕复合材料结构分析是缠绕复合材料力学性能研究及应用的重要基础。
Finally, FEA was used to analyze the drawing performance of those high strength hot rolled sheet metals.
最后，本文对几种高强度热轧钢板的圆筒拉深过程进行有限元分析。
Introduce an analyses process by doing FEA calculate to the U-style BOP's body and intermediate flange with ANSYS.
应用ANSYS软件对U型防喷器壳体、中间法兰等零部件进行了有限元计算；
electro-slag furnace; induction heating; numerical simulation; electromagnetic field; temperature field; FEA; coupled field.
电渣炉；感应加热；数值模拟；电磁场；温度场；有限元分析；耦合场。
Finally, case study of the fatigue stress module of bolt comparing the result to the FEA, the result basically same.
最后以螺栓疲劳应力模块为例，将其计算结果与有限元软件分析结果进行比较，两结果基本一致。
Results show that the position where the maximum stress happens in FEA and the actual rupture position are the same.
计算结果显示，结构中应力响应最大值发生在筛箱短横梁处，与结构实际断裂位置一致。
Objective To investigate the mechanism of the hip shelf arthroplasty for adult acetabular dysplasia with finite element analysis (FEA).
目的探讨髋臼翻转造盖术治疗成人髋臼发育不良的力学机理。
The formulation of the FEA model can be justified for the tested loading conditions.
制定了有限元模型可以合理的测试工况。
The analysis result indicates that it is an effective method to apply FEA-based optimization in the design of clamping claw.
分析结果表明，将基于有限元分析的优化技术应用于夹紧爪的设计是一种有效的方法。
Comparisons with FEA demonstrate the applicability of the approach to stiffened plates under lateral pressure and thrust.
与有限元分析（FEA）的比较表明该方法对解决加筋板在横向压力和推力载荷下的问题是适用的。
The FEA results show that initial crack comes into being as the maximal Von-Mise stress exceeds the compressive strength limit of rubber.
结果显示，当最大接触应力大于橡胶材料压缩强度时，极易产生初始裂纹。
The bearing behavior and failure mechanism of the cast steel joint are studied and the accuracy of the FEA model is verified by the test.
试验研究了铸钢节点的承载性能和破坏机理，并验证了有限元浅析浅析的正确性。
Secondly, the theory of ultrasonic traveling wave driving finite element analysis (FEA) method is introduced.
介绍了超声行波微流体驱动有限元分析理论基础。
Analyzing the structure performance of the recirculating ball and hydraulic pressure power steering by FEA(Finite Element Analysis).
采用有限单元法对某循环球式液压动力转向器进行了结构强度的研究。
Resonance frequency is measured using dynamic signal analysis instrument. The result is very close to result calculated by FEA.
利用动态信号分析仪对手柄的谐振频率进行了测试，结果与有限元计算的谐振频率非常接近。
According to the structural characteristics of large compressor, finite element analysis (FEA) of the impeller has been much more important.
鉴于大流量压缩机三元叶轮的结构特点，目前针对大流量离心压缩机叶轮的有限元分析已经越来越受到重视。
The simplified model was validated by its comparison with the key responses of the detailed FEA model.
通过与原详细有限元模型的关键响应量对比，证明了简化模型的准确性和有效性。
Some suggestions with reference value for FEA are presented by comparing several different modeling methods.
同时也比较了几种建模方法的优劣，提出对有限元分析有参考价值的建议。
Firstly, a commercial FEA software ANSYS is employed to construct a three-dimensional finite element modal of turbine blade.
首先，在商用有限元软件ANSYS环境中建立了涡轮叶片的三维有限元应力分析模型。
The finite element analysis (FEA) and the variable density methods were used. The optimization method and process were presented.
采用有限元法与变密度法，给出了优化方法和步骤。
Machine structure designed and refined by Finite Element Analysis (FEA) to ensure the rigidity and the optimal machine structure.
与工研院技术合作，针对铸件设计进行有限元素分析（FEA），以得最佳化的机台结构。
Finally fatigue coefficient of fuel injection pump camshaft was calculated by FEA results, and the conclusion . . .
最后利用有限元结果计算喷油泵凸轮轴疲劳安全系数，可以得到该喷油泵凸轮轴是安全可靠的。
Responsible to perform thermo-mechanical simulations for new product designs using FEA modeling tools e. G. ANSYS.
负责通过热机械应力模拟来开发新产品，熟练运用FEA分析工具例如
A finite-element analysis (FEA) model of an intact lumbar disc-body unit was generated.
有限元分析（FEA）模型的一个完整的腰椎间盘突出症体单位产生。
The strain energy functions to characterize the mechanical properties of rubber with FEA are described.
介绍在有限元分析中描述橡胶力学性能常用的应变能函数。
Use FEA, it inspects the strength of some parts, and gives the stress distributing and displacement under general operating conditions.
同时采用有限元法对其中某些零件的强度进行了校核，得到了在一般工况下的应力分布和位移状况。
Externally prestressed box girder with corrugated webs is studied by experiment and FEA method.
通过实验和有限元方法研究了波纹钢腹板体外预应力箱梁转向装置的构造、力学性能。
Virtual prototyping (VP) and finite element analysis (FEA) technology are belonged to CAE.
虚拟样机技术和有限元技术均属于CAE。
According to development of the ventilating air duct, simulates and analyses the air duct with the CFD and FEA software.
针对空调通风用风管的发展趋势，运用CFD与FEA软件对风管进行了模拟分析。
In the fifth chapter, related theories of FEA topological optimization and parametrical optimization are studied.
第五章：分析了有限元拓扑优化与参数优化方法。
Then, the loading conditions were analyzed by FEA to obtain calculation result.
接着对桥壳受力情况进行有限元分析，输出计算结果。
Finite Element Analysis (FEA) was performed for strength check of the pre combustion charmber in this article.
本文用有限元分析（FEA）方法对它进行强度校核。
Increasing number wind turbine components analysed using FEA?
越来越多的风机部件使用有限元进行分析
Based on the FEA model, an optimized control strategy is proposed to improve the performance of the SRM under two-phase excitation.
最后，根据FEA的结果，提出了一种优化的控制策略来提高这种SRM的性能。
Modern experimental analytical technique makes up some shortage of FEA.
现代实验分析技术弥补了有限元分析的某些不足。
The deformation path of sheet metal is optimized. FEA numerical simulation on the forming process of the two methods are carried out.
文章通过有限元数值模拟研究了这两种成形方式各自的特点和规律，并进行了比较。
A non-linear FEA method of the rolling resistance and the temperature profile for radial tire has been proposed.
提出用非线性有限元法分析子午线轮胎滚动阻力和温度场的方法。
There are four parts in this paper, dryness test, mechanics characteristic test, cracking performance test and FEA analysis.
论文包括板栗的干燥特性试验、力学特性试验、揉搓破壳性能试验及有限元分析。
