green-sand

green-sand

美 　英

• na.【地】海绿石砂；【机】新取砂
• 网络湿型砂

英汉解释

na.	1. 【地】海绿石砂;【机】新取砂,湿砂

例句

The gas evolution test method has the advantage that the effective coal dust content in green sand can be determined rapidly and accurately.

发气量试验方法的优点是能够迅速和准确地确定型砂中有效煤粉的具体含量。

The system can test active clay content and moisture of green sand fast and control its composition directly.

该系统能快速测定型砂的有效粘土含量和含水量，实现型砂质量的直接控制。

The factors influencing the rigidity of green sand mold during pouring were analyzed.

对影响湿砂型浇注时的刚度的各种因素进行了分析。

It is concluded that coating of sodium silicate alumina clay makes face of aluminium alloy casting in green sand nonsmooth and level.

得出了水玻璃—铝钒土涂料使湿砂型铝合金铸件表面光滑平整的结论。

green sand beach lies on the slopes of the world ' s largest active volcano , mauna loa.

绿沙海滩就位于全球最大的活火山冒纳罗亚的斜坡上。

Moulding machines with green sand.

要有机械潮模砂造型。

Shrinkage Prevention of A Nodular Iron Rotator Seat Casting Produced with Green Sand Mould

湿型铸造球墨铸铁转子座缩松缺陷的防止

Measurement of Elastic Modulus and Investigation on Viscoelasticity of the Foundry Green Sand

铸造湿型砂弹性模量测量及粘弹性的研究

Experimental Investigation of Air Impact Molding Machine with Formed Squeeze Head for Combined Mould of Green Sand of Motor Housing

用气冲气推成形触头造型机制造电机壳铸型的试验研究

The Investigation and Application of New Alcohol Based Brushing Coatings for Green Sand Cast

粘土湿型砂用新型醇基喷涂涂料的研究与应用

Research on the Method and Device for Fast Testing Permeability and Compactability of Green Sand and Compaction of Mould

湿型砂透气性、紧实率及铸型紧实度快速测定方法与装置研究

Research of a New Synthesis Evaluation for Green Sand Quality

一种新型湿型砂质量综合评定系统的研究

Analysis and Improvement of Technology on the Plate Spring Bracket Steel Castings of Trucks Founded by Green Sand

汽车板簧支架类铸钢件的湿型工艺分析与改进

Investigation on Constitutive Relationship for Springback of Green Sand

型砂回弹本构关系研究

Production Technology of Centrifugal Casting Pipe by Cooled Metal Mold Lined with Green Sand

湿型砂冷模法金属型离心铸管的生产技术

Controlling Outline on Production and Application of Bentonite and Green Sand

膨润土及湿型砂生产应用的控制要点

The Application of New Alcohol Based Spraying Coatings for Green Sand Mold

新型醇基喷涂涂料在粘土湿型砂中的应用

Investigation on Using Compound Carbon Powder as Substitute for Seacoal in Green Sand

复合碳粉代煤粉在型砂中的应用研究

Present Situation of Automatic Measurement and Quality Control of Green Sand

型砂质量的自动检测与控制研究现状

Data Acquisition System for Fast Testing Green Sand Quality Parameters

型砂质量参数快速数据采集与处理系统

Review of Green Sand Automatic Measurement and Quality Control Techniques

湿型粘土砂质量自动检测与控制技术述评

Progress of Research on Numerical Simulation of Green Sand Molding Process

湿型砂造型和制芯过程数值模拟研究进展

Application of Statistical Process Control in Green Sand Foundry

统计过程控制在粘土砂湿型铸造生产中的应用

New-type Apparatus for the Measurement of Wet Tensile Strength of Green Sand

新型湿型砂热湿拉强度测试仪的研制

Relation between Hardness and Strength and Air Permeability of Green Sand

湿砂型硬度强度透气性之间的关系

The Influence of Green Sand Properties on Quality of Iron Casting and Their Control

湿型砂性能对铸铁件质量的影响及控制

Some noticeable essentials of application of bentonite in green sand

膨润土在粘土湿型砂中应用的几个应注意的控制要点

Analysis of Influencing Factors on Green Sand Permeability

湿型砂透气性影响因素的分析探讨

Production of Honda Cylinder Liner on Green Sand Squeezing Moulding Line

本田气缸套湿型砂挤压造型的生产

Constitutive Relationship of Green Sand on the Squeeze Process

松散型砂介质复杂本构关系的构建

Investigation on Viscose-plasticity of Foundry Green Sand

铸造湿型砂粘塑性的研究

The Formation and Control of Imperfections of Small Castings of Green Sand Mold

铸造湿型小件缺陷产生的原因与控制

Industrial Test of Groove Linear Board of Green Sand Mold Ball Grinding Machine

湿型球磨机槽型衬板工业性试验

Test and Application of Green Sand Mold Coating in thin-plate Iron castings

薄壁铸铁件湿型铸造涂料的实验与应用

Influence of Mulling Sand Process on Green Sand Properties

混砂工艺对粘土湿型砂性能的影响

Prevention of Scab Type Surface and Defects of Green Sand Castings

湿型铸件结疤类表面缺陷的防止

Japanese reclamation of using old green sand for resin-bonded sand

日本湿型旧砂用于树脂砂的再生方法

Control Unit Design of Direct Control System of Optimizing Green Sand Quality

用于型砂质量直接优化控制系统的控制单元设计

The Prevention of Lift Core Defects of Green Sand Mold Steel Casting

湿型铸钢件偏芯缺陷的防止

Mathematical Model of Bentonite Burn-off in Green Sand Mould

湿型砂膨润土烧损的数学模型