loopback
美 [lʊp'bæk] 
英 [lʊp'bæk]
英汉解释
例句
If you answered "yes" to any of these questions then you need the Ethernet Loopback Jack.
如果上述任何一个问题回答“是”，那么你需要在以太网环插座。
The index of the loopback interface is usually 1, but you cannot rely on this.
环回接口的索引通常为1，但是不能依赖于此。
Create the new XML Firewall with a static back end (instead of the loopback you used for scenario #1).
创建一个带有静态后台的新XMLFirewall（而不是在场景#1中使用的回送）。
At the end of the loopback test, it reports a score as the average number of messages transferred per second.
在回送测试最后，它会以平均每秒发送的消息数作为一个分数形成报告。
The rest of the packages are not installed into the zone and are accessible with a loopback file system (lofs) in read-only mode.
其余的数据包并不安装到这个区域中，并且使用一个只读模式的环回文件系统（lofs），可以访问这些数据包。
Used to invoke loopback detection and handling in bidirectional transactional replication .
用于在双向事务复制中调用环回检测和处理。
When a loopback interface is configured, OSPF uses this address as the router ID, regardless of the value.
当迴路介面被组态时，无论其值，OSPF使用此位址当作路由器ID。
This information is used to invoke loopback detection for bidirectional transactional subscriptions that have the loopback property set.
该信息用于为具有环回属性集的双向事务性订阅调用环回检测。
The auto-netsh. sh script tunes some kernel networking parameters, configures the loopback interface, and starts up a DHCP client.
auto-netsh.sh脚本调整一些内核联网参数，配置loopback接口，并启动一个DHCP客户机。
When OSPF is requested to advertise a loopback network, OSPF always advertises the loopback as a host route with a 32-bit mask.
当OSPF被要求广播一迴路网路时，OSPF总是广播此具32位元遮罩的迴路主机路径。
Any linked server in the partitioned view cannot be a loopback linked server.
分区视图中的所有链接服务器都不能是环回链接服务器。
This device is currently in use by another application. Close that application before attempting to run the loopback test.
另一个应用程序正在使用这个设备。运行环回测试之前关闭那个应用程序。
The illustration shows that the broker is running on the same machine as the client application since the local loopback address is used.
演示表明代理和客户端应用程序运行在同一台机器上，这是因为使用了本地回环地址。
The device is not available for loopback diagnostics. The computer may need to be restarted or the device may need to be reinstalled.
无法为环回诊断使用这个设备。计算机可能需要重新启动或者设备需要重新安装。
Thanks to this flag, when dealing with the loopback device, the kernel can skip some operations needed for real devices.
感谢这个标志，当处理一个环回设备时，内核就可以跳过一些真实设备所必须的操作。
Apply workarounds to any known limitations, such as the loopback occurrence mentioned above.
对任何已知的限制应用解决方法，例如上面提到的环回实例。
The loopback mode tests the raw server performance , and the network mode tests the network scalability performance .
回送模式测试原始服务器性能，网络模式测试网络可伸缩性性能。
Indicates whether the specified IP address is the loopback address.
指示指定的IP地址是否是环回地址。
The data returned by this property includes loopback interfaces.
由此属性返回的数据包括环回接口。
Additional features with the SP505 include internal loopback that can be initiated in either single-ended or differential modes.
SP505还包括内部回送在内的一些其它特性，内部回送可以在单端或差分模式被启动。
The loopback operation is also used to troubleshoot DS1 connection problems.
环回操作也是用来排除DS1连接故障的。
VolanoMark can be run in two modes: loopback and network.
VolanoMark可在两种模式下运行：回送和网络模式。
The following examples use a couple of flags on the interface to retrieve its current state and check for loopback.
下面的示例使用一对接口标志来检索其当前状态，并检查环回。
For instance, using FUSE, a user can mount an sshfs (secure shell) filesystem or a loopback filesystem (see Resources).
例如，用户可以使用FUSE挂载sshfs（安全shell）文件系统或loopback文件系统（见参考资料）。
The -i lo option tells tcpdump what interface to listen on (the loopback device, in this case).
ilo选项告诉tcpdump要侦听哪个接口（在这个例子中要侦听回送设备）。
On a router that has more than one loopback interface, OSPF takes the highest loopback IP address as its router ID.
有超过一个迴路介面的路由器，OSPF选取最高迴路IP位址当作它的路由器ID。
Hence, the loopback interface 127. 0. 0. 1, but it could just as easily be running on a remote system.
所以这里使用loopback接口127.0.0.1，但是在远程系统上运行PHP也很容易。
That contains the index for the loopback interface.
包含环回接口的索引。
It is considered good practice to use loopback interfaces for all routers running OSPF.
使用迴路介面给所有执行OSPF的路由器被视为好的实务。
Based on the adaptive LSP detection model, the network delay and the detection timeout are measured with loopback detection.
该机制基于自适应LSP检测模型，由环回方式测量网络延迟和检测超时。
Like cramfs, you can use SquashFS on a standard Linux system with mksquashfs and the loopback device.
和cramfs一样，您可以通过mksquashfs和loopback设备在标准Linux系统上使用SquashFS。
The IP address is not your loopback address.
IP地址不是你的回环地址。
linuxrc's primary task is to get the CD mounted so that the loopback filesystem can itself be mounted and accessed.
linuxrc的主要任务是安装CD，从而使回送文件系统本身也可以被安装和访问。
Gets the index of the loopback interface.
获取环回接口的索引。
Get the setting for local loopback of multicast datagrams.
获得多播数据报的本地回环设置。
The network interface is a loopback adapter.
网络接口是环回适配器。
One peculiarity is that HTTP connection data is not accumulated for services in loopback mode.
其中一个特性就是在回路（loopback）模式中，不会对服务累积HTTP连接数据。
The specified network adapter is not valid because it is a loopback adapter. Specify a different network adapter.
指定的网络适配器无效，因为这是一个环回适配器。请指定其他网络适配器。
The Loopback Test could not be performed.
不能执行环回测试。
You can play with cramfs using the mkcramfs utility and the loopback device.
您可以通过mkcramfs实用工具和loopback设备尝试使用cramfs。
