metallographic
美 [mɪtælə'græfɪk] 
英 [mɪtælə'græfɪk]
- adj.金相学的
- 网络金相分析；金相检查；金相组织显微镜
英汉解释
例句
The fracture reason of high temperature fixture was analyzed by means of metallographic examination, SEM and chemical composition analysis.
采用金相检验、扫描电镜观察和化学成分分析等方法对万能材料试验机高温卡具断裂原因进行分析。
The surface cracks on steel sheet DB685 was analyzed by metallographic microscope and scanning electron microscope.
用金相显微镜和扫描电镜分析方法，对DB685钢板表面裂纹进行分析。
The heat treating of the cold precision forging gear is researched by experimental and metallographic analysis method.
采用试验和金相分析方法对冷精锻直齿圆柱齿轮的锻后热处理情况进行了研究。
By means of metallographic, energy spectrum analysis, and hardness tests, the fracture reason of the die was studied.
采用能谱分析、金相检验和硬度测试等方法，对模具的断裂原因进行了分析。
Causes of surface black spot and cracks of sponge clamp were analyzed by means of appearance and metallographic observation.
采用宏观和微观组织观察，分析了海绵钳表面黑斑及开裂的原因。
The mechanisms were analyzed and discussed by metallographic observation and transmission microscope observation of the microstructure.
结合金相组织和透射电镜组织观察，对影响机理进行了分析和讨论。
electron metallographic analysis of cracks of a certain steam generator tube was made by electron microscope.
用电子显微镜对该蒸汽发生器传热管管束裂纹进行断口电子金相分析。
Surface crack on teeth clamp was studied by means of macroscopic and metallographic examination.
采用外观和金相检验等方法对牙钳表面裂纹进行了分析。
Metallographic microscope is suitable for research in metallography, metallurgy laboratory professionals.
特点Features；金相显微镜适用于金相学、冶金学专业实验室的研究。
The macro, chemical and metallographic analysis have been performed on the cracking failures of reformer tube for hydrogen generation.
针对制氢转化炉炉管多次开裂失效的情况，进行了宏观分析、化学分析以及金相分析。
In combination with the results from metallographic examination, a mathematic model for inclusions size distribution was established.
结合金相检测结果，对参考物样品中夹杂物粒径分布进行统计，建立相关数学模型。
The microstructure and fractography of the samples were respectively observed by metallographic microscope and SEM.
利用金相显微镜、扫描电镜对试样的显微组织、断口形貌进行观察；
The fracture reason of roller was studied using chemical analysis, mechanical properties, metallographic structure, fracture analysis et al.
采用化学分析、力学性能、金相组织、断口分析等方法研究了轧辊的断裂行为。
And metallographic analysis shows that the microstructure of fracture is grey cast iron, and severe composition segregation is found.
在开裂处做金相分析，结果表明：断裂部位显微组织为灰铸铁，存在有脱碳层，同时存在严重成分偏析；
The contents of oxygen, nitrogen and inclusions during refining were studied quantitatively by metallographic and chemical analysis.
通过合理的工业试验和金相、化学等分析手段，对冶炼过程钢水中氧、氮含量和夹杂物进行了定量分析。
This paper summarizes the construction principle, resolution power and amplification about the system of compuer-metallographic microscope.
概述了计算机-金相显微镜系统的建立原则、系统的分辨率和放大倍数。
The experimental and metallographic results show that high frequency VSR is an efficient technology of VSR.
实验研究及金相分析结果表明，高频激振时效技术是一种有效的振动时效新方法。
By the theory of metallographic analysis and SEM , it is a new means to appraise the metal disjunction of identity of judicature evidence.
利用金相分析理论，结合扫描电子显微镜，对司法物证中金属分物的同一性鉴定，是一种简便、快速、准确的新方法。
Then the tissue of Fe-Al intermetallic compound coating was observed by Metallographic Microscope and Scanning Electron Microscope.
采用金相显微镜、扫描电子显微镜（SEM）研究Fe-Al金属间化合物复合涂层的组织。
Provide testing services on heat treated parts to Wuxi plant, including metallographic analysis, hardness measurement, etc.
为无锡工厂提供热处理零件的测试服务，包括金相分析、硬度测量等。
Metallographic change is also researched. The hardened surface band depths as well as hardened surface band widths were obtained.
获得了金相组织的变化，获取了试验后的硬化层深度和宽度。
The microstructure of the coating is analysed with metallographic microscope and X ray diffractometer.
用金相显微镜和X射线衍射仪分析涂层的显微组织。
The test scheme and test results were described, covering ser-vice life analysis, crack expansion analysis and metallographic analysis.
介绍了试验方案和试验结果分析，包括寿命分析、试验裂纹扩展规律分析和金相分析。
Using metallographic method, the wear of the coupling copper slide block of hot strip mill qualitatively studied.
采用金相分析方法，对热轧机万向接轴内铜滑块的磨损现象进行了定量分析。
Effect of aluminium coating process on the structure and properties of aluminized steel strip was studied using metallographic technique.
应用金相技术研究了热镀铝工艺对镀铝钢带组织和性能的影响。
The texture of fine grain simple steel growth and the metallographic texture, mechanical performance change can affect weld performance.
细晶粒碳素钢在焊接热循环作用下，晶粒长大和组织、性能的变化影响焊接性能。
The welded joints were completed by the X-ray test, mechanical properties tests and metallographic analysis.
焊后对焊接接头进行了射线检测、力学性能测试、接头金相组织分析。
SEM and metallographic analysis indicate that the crack grows along grain boundaries by cavitation.
扫描电镜和金相照片分析说明，裂纹沿晶界孔洞扩展。
Failure analysis on the exhaust valve skirt used in supercharge diesel engine was carried out through metallographic and SEM analysis.
利用金相及扫描电镜对增压柴油机排气门盘部断裂原因进行了分析。
Using Metallographic, SEM, EDAX and other chemical and mechanical methods, imported ferrite stainless steel bars are detected and analyzed.
通过金相、SEM和EDAX等先进显微分析技术及化学成份和机械性能检测等方法对封头-进口铁素体不锈钢棒进行检验和分析。
It is shown that the AC electrolytic corrosion process in a corrosive is a easy way to prepare metallographic specimens of iridium material.
实验表明，在腐蚀介质中进行交流电解是铱材金相制作的快捷之路。
Hereby, we deal with Co-Cr alloy by different heat treatment methods and analyse its metallographic.
据此，我们采用不同的热处理方法对牙用钴铬合金进行处理，并对其进行金相扫描分析比较。
The main equipments used include metallographic microscope and optical spectrum analyzes.
主要用到的设备有金相显微镜、光谱分析仪。
The microstructure of joint was analyzed by metallographic observation and hardness test.
通过金相观察以及显微硬度测定分析了接头组织性能。
The failure reason on the broken teeth of gear was analyzed by metallographic examination, SEM and EDS technology.
通过金相检验、扫描电镜和能谱仪等检测手段对失效齿轮进行了分析。
The metallographic structures of Cu-Zn powder under different conditions were studied by SEM, TEM and XRD in this paper.
采用SEM、TEM及XRD等方法研究了铜锌粉末在不同制备阶段时的金相组织。
Have knowledge of specification and criteria in metallographic & mechanics analysis, can conduct a test independently.
知晓本专业规范和标准，具有独立操作的能力。
Step etching, heat dyeing, surphurating method are used to reveal metallographic structure of precious metal composites and solders .
采用分步侵蚀法、热染法、硫化法显示贵金属复合材料和焊接材料的显微组织。
A brief introduction to the preparation of metallographic specimen of NdFeB ingot or strip casting are given in this article.
文章介绍了钕铁硼铸块或速凝薄带的金相样品的制备方法。
Mechanical properties and metallographic structure of different welded joints for duplex stainless steel 2205 were investigated.
研究了双相不锈钢2205在不同焊接工艺时接头的组织和性能。
