nitrided

nitrided

美 　英

• 网络氮化的；氮化科技；渗氮

例句

Results showed that contact fatigue property of carburized gear samples was better than that of nitrided gear samples.

试验结果表明，渗碳处理试样接触疲劳性能优于调质氮化的试样。

Metallurgical bonding between the nitrided layer and Ti substrate was observed.

氮化层与基体材料之间为冶金结合。

This article has elaborated the equipment, process of plasma nitriding for piston ring and the examination way of nitrided layer.

阐述了活塞环等离子渗氮设备、工艺及渗氮层的检测方法。

The valve rod (steel 35)is nitrided in the fluid soft nitriding process, the main material being made up of urea.

采用以尿素为主要原料的液体软氨化工艺，对阀杆（35钢）进行了氮化处理。

The surface of TiAl alloy is nitrided by CO 2 laser gaseous alloying with nitrogen.

使用激光气相合金化方法，氮气气氛下在铝钛合金表面进行氮化处理。

Auto or manual measurement Computer picture analvis Accurate hardness correction Hardness gradient graph of carburized or nitrided laver .

自动或手动测试，计算机图象分析，软件硬度精确修正，渗碳层，氮化层梯度图示。

The results show that a relatively smooth and crack-free nitrided layer was obtained on titanium by laser gas nitriding.

结果表明：通过激光气体氮化可以在金属钛表面得到表面相对平滑、无裂纹的氮化层；

In order to obtain MnN, manganese power has been nitrided by nitrogen decomposed from ammonia at high temperature in pipe type oven at lab.

采用正交设计法，在实验室管式炉内、温条件下利用氨气分解产生的活性氮对锰粉进行氮化获得氮化锰粉。

Steel-iron parts - Determination of nitrided case depth and metallographic examination of nitriding structure

钢铁零件渗氮层深度测定和金相组织检验

Structure and Wear-resistance of Ion-nitrided Austenite Stainless Steel

奥氏体不锈钢低温渗氮层的组织与耐磨性

HV-1000A hardness of nitrided layer, ceramics, steel, nonferrous metals, metal sheet;

1000A显微硬度计测定渗氮层、陶瓷、钢、有色金属；

The effect of laser smoothing on morphology and wear resistance of laser-nitrided titanium alloy

激光整平对钛合金激光氮化表面形态和耐磨性的影响

Load Carrying Capacity of Nitrided Gears

承载能力氮化齿轮