nitriding
美 ['naɪtraɪdɪŋ] 
英 ['naɪtraɪdɪŋ]
英汉解释
例句
The surface coating of titanium coating, coating, coating, nitriding, chromium nitride coating.
本色，镀钛涂层，氮化涂层，氮化铬涂层。
The paper makes a primary approach to a two big problems on the long period and the heavy brittleness resulting from gas nitriding process.
针对气体渗氮工艺存在的周期长和脆性大两个问题进行了初步的探讨。
The relatively low temperature of the nitriding process produces components with a scale free surface, and minimum distortion.
相对较低温度的渗氮工序使得组件表面得以实现自由表面以及最低畸变的。
Iron nitride was obtained by the mixing technology with laser and plasma beams nitriding coaxially on the surface of iron in atmosphere.
采用激光和氮等离子体混合方法在大气气氛下对铁样品表面进行处理，获得了铁氮化合物表层。
The article introduces the structure feature and heat treatment technology of a low vacuum nitriding furnace for treating axle work pieces.
本文介绍了处理细长轴件的低真空氮化炉的结构特点和热处理工艺。
The heat treatment technology of carbo - nitriding of steel has the characteristic of lower treatment temperature and direct quenching.
钢的碳氮共渗热处理工艺具有共渗温度低、可直接淬火等特点。
However, nitriding is a relatively expensive process and is used only if other processes do not produce satisfactory results.
然而，渗氮是一种相对较昂贵的热处理方法，并且通常只在其它热处理方法无法满足要求时才会使用。
Nitrogen has greater hardening ability with certain elements than with others, hence, special nitriding alloy steels have been developed.
氮与某些元素的硬化能力比其它元素大，因此开发了专用的渗氮合金钢。
and the nitriding atmosphere is ammonia and propane gas or other gas or liquid which can generate nitrogen atoms and carbon atoms.
渗氮氛围为氨气和丙烷气或是其它可以产生氮原子和碳原子的气体或液体。
The vickers hardness and nitriding surface fulfill requirements, and also improves the machining quality of the products.
主轴锥孔的维氏硬度和氮层深度均达到要求，提高了产品的加工质量。
Therefore the current process must be improved for upgrading the first percent of pass for soft-nitriding heat treatment.
为此就须改进现有工艺，提高软氮化热处理的一次合格率。
Research on the dielectric barrier discharge nitrogen nitriding at atmospheric pressure have consumedly progressed.
利用介质阻挡放电进行常压氮气渗氮研究取得突破性进展。
Using dielectric barrier discharge (DBD) effect, atmospheric pressure non equilibrium plasma nitriding is carried on at self made equipment.
利用介质阻挡放电原理，在自行研制的设备上进行了常压非平衡等离子体渗氮。
Reducing discharge interval and increasing electric field intensity could increase the hardness and depth of nitriding layer markedly.
在本工艺条件下，适当减小放电间隙，增大电场强度，可以明显提高渗层的硬度和深度。
This paper introduces the research and development of manufacture technique of high strength nitriding gear used in gearbox.
本文介绍了用于变速器的高强度渗氮齿轮制造技术的开发与研究工作。
Nitriding steels, by virtue of their alloying content, are stronger than ordinary steels and respond readily to heat treatment.
由于渗氮钢的合金比例，它们比普通钢更强，也容易热处理。
To increase production capacity of nitriding ferroalloys, reducing production cost, PSA nitrogen plant is selected.
提高氮化合金的生产能力，降低生产成本，采用了PSA制氮系统。
QPQ technology is a surface treatment technology which consists essentially of liquid nitriding and liquid oxidizing.
QPQ技术是一种主要包括盐浴渗氮和盐浴氧化的表面处理技术。
The gas nitriding technology of H13 steel was studied by an orthogonal test.
运用正交试验法，研究H13钢气体渗氮工艺。
Nitriding steels - Technical delivery conditions.
氮化钢.交货技术条件
For problems in which corrosion resistant surfaces are desirable, nitriding is the process most often used.
对于表面有抗腐蚀性要求的齿轮，渗氮是最常用的方法。
Gears are the nitriding process, high hardness and resistance, and the shaft installed in the collar with.
齿轮均经氮化处理，有较高的硬度和耐磨性，与轴一同安装在轴套内。
and after the ionic nitriding, finally performing polishing or super-grinding on the working surface to process a finished product.
离子氮化后，最后对工作表面进行抛光或超精磨加工，加工出成品；
A versatile surface alloying technique , the Xu-TEC or XU- LOY process has been developed on the basis of the plasma Nitriding.
双层辉光离子渗金属技术是在离子氮化基础上发展的表面冶金技术。
Also, the stainless steel ion nitriding, low carbon steel ion nitriding, nitrogen oxides more prominent role.
另外，对不锈钢离子氮化、低碳钢离子氮化、氧氮化作用更加突出。
The relationship of nitriding results with different nitrogen plasma fluxes was discussed.
讨论了氮等离子体流量对混合法氮化效果的影响。
Laser pulses melt the metal surfaces and activate nitrogen, inducing nitriding reaction in liquid phase.
激光的作用使得金属表面熔化和氮气激活，导致液相氮化反应；
The plasma nitriding will improve on surface hardness and wear resistance of the piston ring.
活塞环经过等离子渗氮处理，提高了活塞环的表面硬度和耐磨性。
By using medium to stop discharging, the non-equilibrium plasma nitriding under normal pressure can be made in self developed equipment.
利用介质阻挡放电，在自行研制的设备上进行常压非平衡等离子体渗氮的研究。
Liquid nitriding utilizes molten cyanide salts and, as in gas nitriding, the temperature is held below the transformation range.
液体渗氮利用熔化的氰化物盐，就像气体渗氮，温度保持在低于转化范围内。
Optimum polishability and photo etching properties suited for nitriding, hard chromium plating &PVD coating.
抛光性能和光蚀性能甚佳，适合氮化，镀硬铬和物理气相承继等。
Nitriding Gears as an Alternative to Case Hardening?
氮化齿轮能代替渗碳淬火齿轮吗？。
Plasma nitriding has the advantage that it is easy to stop the process, in contrast to gas nitriding and especially to salt bath nitriding.
血浆氮化物有利益中止程序很容易，与氮化物的瓦斯相反和特别加盐于沭浴氮化物。
Barrel screw adopts the high quality alloy 38CrMoALA, after nitriding process, the hardness and corrosion resistance.
机筒螺杆采用优质合金钢38CrMoAL，经氮化处理，具有最佳的硬度和腐蚀性能。
This article has elaborated the equipment, process of plasma nitriding for piston ring and the examination way of nitrided layer.
阐述了活塞环等离子渗氮设备、工艺及渗氮层的检测方法。
The liquid nitrogen and liquid workpiece direct conduction heating, shortened the workpiece heating time and improve the speed of nitriding.
液体氮化由于液体与工件直接传导加热，缩短了工件加热时间，提高了渗氮速度。
In general the uses of the two-nitriding processes are similar.
一般而言两种渗氮方法的用途是类似的。
Nitriding in new salt baths reduced the treatment cost by 30% as compared to the process in the old cyanide- base baths.
与过去以氰化物为主的盐浴相比，新盐浴所采用的氮化法减少了30%的处理成本。
So the testing nitriding quality becomes very important.
因而，检验镗轴的氮化质量十分重要。
Titanium alloy material (TC4) samples were treated with nitriding technique.
牙用钛合金TC4，使用渗氮表面技术处理。
