non-circular
美 
英
例句
Such a non-circular shape will alter the birefringence property of the fiber and influence the polarization behavior of the laser.
这种非圆形结构会改变光纤双折射特性，从而影响输出激光的偏振特性。
Fast tool servo (FTS) is one of the key technologies in both non circular turning and non-axisymmetric turning fields.
快速刀具伺服机构（FTS）是非圆数控车削和非轴对称车削的一项共同的关键性技术。
Researches are made to find out the active tracing measurement strategy of crankshaft roundness error during non circular grinding process.
采用非圆磨削加工曲轴可在一次装夹完成主轴颈和连杆颈的磨削。
The piston designed non-circular pin-hole can reduce the centralized stress and extend the work life of the piston.
将活塞销孔设计为异形销孔可有效降低销孔应力集中，延长活塞使用寿命。
Although non-circular gears have special transmission character in kinematics and geometry, but it were not used widely in industry.
非圆齿轮在运动学、几何学等方面具有独特的传动特点，但其尚未得到较为广泛的应用，主要原因是设计和制造的困难。
A non circular gear conjugated with an eccentric gear and its design are discussed here in the paper.
讨论了与一个偏心的圆齿轮共轭的非圆齿轮及其传动设计的有关问题。
The concept introduced in this paper is adaptable to the problems of optimal transfer between non-circular and non-coplanar orbits.
本文给出的原理同样适用于非圆形、非共面轨道之间的最优转移问题。
It would have 80 independently rotating, non-circular floors. This would give the tower a continuously changing shape.
此楼有80层，每个圆形的楼层都可独立旋转，这样整幢大楼的外形将连续不断得地变化。
A new method, particle swarm optimization(PSO) algorithm, is adopted to locate the non-circular critical slip surfaces of slopes.
采用粒子群优化算法搜索边坡的临界滑动面及其对应的最小安全系数。
The system runs well. It provides a method of digital design of non-circular gear drive.
系统运行效果良好，为非圆齿轮传动提供了一种数字化设计方法。
The system runs well. It provides a method of digital design of non-circular gear drive.
系统运行效果良好，为非圆齿轮传动提供了一种数字化设计方法。
A teaching model for the designing and machining of non-circular gears is established.
建立非圆齿轮设计加工的教学模型。
analyses the structure, work theory and application in non-circular turning system of linear motor.
浅析浅析了直线电动机的结构、工作原理和其在非圆车削系统中的应用。
An integrated non circular turning process system is proposed in the thesis.
本文在调研之后提出了一套完整、经济、实用的非圆车削加工系统。
Then come to the consistent results, the mechanical hydrauservo system of non-circular and high-speed profile tool rest is stability.
并得出一致的结果，即所研制的高速非圆体液压仿形刀架系统稳定。
The control software developed for cam non-circular grinding is applied to Siemens SINUMERIK 840D CNC system.
在西门子840D数控系统下开发了凸轮非圆磨削控制软件。
An accurate judgment method on tooth undercutting of non circular gear has been proposed.
提出了一种判断非圆齿轮任意齿廓是否发生根切的精确方法。
The inside of the sleeve is shaped to match the cross section of the tube (12) and the outside has a non-circular shape.
套筒的内部被成形为与管子（12）的横截面相符合并且其外面具有非圆形形状。
Non-circular gear is used to transmit the non-uniform motion which is between the two axles.
非圆齿轮可用于两轴间的非匀速运动传递，实现变传动比传动。
a method of arc fitting machining non circular profile curve is proposed.
提出了一种非圆轮廓曲线圆弧拟合的加工方法。
A new approach based on the method of slices to analyze the stability of slopes with non-circular slip surface is presented.
提出了一种新的非圆弧滑动边坡稳定分析算法，该算法直接建立在条分法的基础上。
Tool adjustment is the key process of non-circular gear hobbing.
对刀是非圆齿轮滚齿加工时的关键工序。
Our research of metal rubber is late which is still blank about the research of metal rubber made with non-circular wire in China.
我国对金属橡胶的研究起步较晚，特别是在非圆截面异形丝金属橡胶的研究上，国内几乎还是空白。
The connecting end (27) is non-circular and includes a groove (29).
所述连接端（27）是非圆形的并且包括槽（29）。
The Analysis of Proper Meshing Between a Pair of Non-circular Gears Manufactured by Involute Cylindrical Gear Cutter
渐开线圆柱齿轮刀具加工的非圆齿轮副能正确啮合分析
Study on an electromagnetic actuation mechanism for boring of non-circular hole and its control method
一种用于非圆异形孔加工的电磁驱动机构及控制方法研究
Method Study of The Normal Force Engineering Calculation of Missile with Non-circular Shape Cross Sections
非圆截面形状弹体法向气动力估算方法
Method Study of the Additional Apparent Area Calculation of Missile with Non-Circular Shape Cross Sections
非圆截面弹体附加表面积工程估算方法研究
Motion design of turning and milling machining on component parts of non-circular section with equal width
非圆等宽截型零件的车铣加工运动设计
The Movement Equations of a Non-Circular Cross-Sectional Slender Projectile
细长杆异型截面弹芯的运动方程组
Generation of non-circular curves by means of least square curve fitting and interpolation
非圆函数曲线的最小二乘拟合与插补实现
Motion design of turning and milling machining on component parts of non-circular section with equal width
非圆等宽截型零件的车铣加工运动设计
The Movement Equations of a Non-Circular Cross-Sectional Slender Projectile
细长杆异型截面弹芯的运动方程组
Dynamic anti-plane characteristic of an infinite piezoelectric medium with non-circular hole
含非圆孔无限压电介质的动力反平面特性研究
The Kinematical Properties Analysis and Simulation of Differential Planet Non-circular Gear Mechanism
非圆齿轮机构运动轨迹微分几何研究
Non-circular cutting experiments using amplitude-phase adjusting feed-forward control in the frequency domain
用频域幅相调整前馈控制的非圆车削实验
Designing method and numerical control machining principle for arbitrary n-polygon non-circular section
多面形非圆型面设计方法及数控加工原理研究
Nonlinear Vibration of Generally Laminated Non-circular Cylindrical Shells
层合非圆截面柱壳的非线性振动分析
Conjugate non-circular gear of eccentric gear and its involute tooth profile
偏心齿轮的共轭非圆齿轮及其渐开线齿廓
Analysis of nonlinear vibration for laminated non-circular cylindrical thick shells
层合中厚非圆截面柱壳的非线性振动分析
