point-contact
美 
英
英汉解释
例句
Four-point bearings should not be used for predominantly radial loads due to the high friction at four-point contact.
四点轴承不应使用为主要由于在四点接触摩擦高径向负荷。
In early 1948, he came up with the bipolar or junction transistor, a superior device that took over from the point-contact type.
在1948年早期，他发明了双极型晶体管，比点接触型晶体管更加完善。
The influence law of clearance on load distribution of single row four-point contact ball slewing bearings is researched.
研究了游隙对单排四点接触球转盘轴承载荷分布的影响规律。
The designation suffixes used to identify certain features of SKF four-point contact ball bearings are explained in the following.
表示SKF四点接触球轴承某些特性的型号后缀解释如下
In this thesis work, the effects of environment on Coulomb blockade behavior in point-contact single junctions are studied experimentally.
本论文以单一金属结点接触实验探讨环境对库伦阻塞现象的影响。
Thrust ball bearings and four-point contact ball bearings (fig) are suitable for light or moderate loads that are purely axial.
推力球轴承和四点接触球轴承（图9）适用于纯轴向的轻负荷或中等负荷。
Point contact in both cylinders Small grooves are called "Serration" , each serration assign as cutting edges.
小槽被称为“锯齿”每一锯齿可看作为一个刀刃。
This dissertation introduces the spin-dephasing induced by quantum point contact (QPC) in quantum dot system.
本文主要研究了量子点材料中，量子点接触（QPC）测量对系统相干性的影响。
Conduction resistance test should take the effect of base point, contact resistance, and on-site disturbance into account.
导通电阻测试需注意参考点（基准点）选择、接触电阻及现场干扰的影响。
The balls make point contact with the raceways (elliptical contact when loaded).
使点的球与滚道接触（椭圆接触时加载）。
Mount point contact primary-level democracy of the leading cadre.
领导干部挂点联系基层制度
A dedicated Meeting Concierge is on hand to assist with any technology or catering support as one-point contact for event organizers.
专业的会议策划专家会全程协调客人的会议，并解决关于技术、餐饮或服务上的所有问题。
SKF four-point contact ball bearings are produced as standard to Normal tolerances.
标准生产的SKF四点接触球轴承符合普通级公差。
SKF four-point contact ball bearings undergo a special heat treatment.
SKF四点接触球轴承经过特殊热处理。
A method to make the hourglass worm gearing with the property of mismatched point contact has been proposed.
提出了用锥面和直线分别展成蜗杆和蜗轮滚刀，获得失配点啮合环面蜗杆传动的方法。
QUICKPOINT grinding is a high-speed "peel grinding" process based on point contact between the grinding wheel and work piece.
QUICKPOINT工艺技术是一种在精磨加工范围工序中只以点接触方式进行磨削的高速外圆磨削法。
The requisite minimum load to be applied to four-point contact ball bearings can be estimated using
可使用以下公式来估算要施加在四点接触球轴承上所需的最低载荷
An experimental study of the conical cylinder point contact plate on cortical microcirculation
锥状点式接触钢板内固定对局部皮质骨微循环影响的实验研究
Biomechanical performance of point contact-dynamic compression plate and its influence on bone blood circulation
点式接触动力加压接骨板的生物力学性能和对骨血循环的影响
Analysis of the Abnormal Phenomenon in the Thermal Zero-entrainment Point Contact Elastohydrodynamic Lubrication
零卷吸点接触热弹流润滑的反常现象分析
the point contact structure is the spherical surface or the cone point;
所述的点接触结构为球面或者圆锥顶尖；
Analysis of the Elastohydrodynamic Behaviours of Point Contact by the Multigrid Method
点接触弹流动压性能的多网格法分析
Elastohydrodynamic behaviors of point contact with surface transverse waviness
表面横向波形点接触弹流动压性能的研究
Numerical Solution for Elastic Point Contact Problem and its Application
弹性点接触问题的数值求解与应用
Effects of point contact-dynamic compression plate on the structure and mechanical property of the fixed bone
新型点式接触动力加压接骨板固定对板下骨质及力学性能影响的实验研究
Experimental Research of Sliding Friction Coefficient of Rough Surface under Lubricated Point Contact
润滑点接触粗糙表面滑动摩擦因数的实验研究
A study on the fundamental formulae for the meshing a analysis of point-contact tooth surfaces and their application
点接触齿面啮合分析的基本公式及其应用研究
Numerical Analysis of the Thermal Micro-EHL Problem of Point Contact with Single Longitudinal Surface Roughness
考虑纵向粗糙度的点接触微观热弹流润滑数值分析
Bone microcirculation after point contact-dynamic compression plate fixation
点式接触动力加压接骨板固定骨微循环形态学观察的实验
Preload Clearance Measurement and Groove Raceway Parameters Design fro Four Point Contact Ball Bearing
四点接触球轴承预紧间隙的测量和沟道参数的设计
Design and preliminary clinical observation of conical cylinder point contact plate
锥状点式接触钢板的研制与临床应用初步观察
Treatment of displaced surgical neck fractures of humerus by point-contact racket-shape plate fixation
点式接触解剖钢板内固定治疗不稳定性肱骨外科颈骨折
Research on the Error Sensitivity of Point-contact Tooth Surfaces with respect to the Mounting Errors
点接触齿面的安装误差敏感性研究
Effect of Second-Order Parameters on Design for Point-Contact Tooth Surface by Controlling Error Sensitivity
点接触齿面在控制误差敏感性条件下的二阶参数设计
The Fuzzy Evaluation Approach for the Minimum Oil Film Thickness in Point-contact Full-film EHL
点接触全膜弹流最小油膜厚度的模糊评价
The wear properties of boron carbide ceramic by a point contact microscope
碳化硼陶瓷磨损特性的点接触显微镜研究
Quantum measurement of single electron state by a quantum point contact
量子点接触对单电子量子态的量子测量
Study on the Model of Elastohydrodynamic Lubrication of Point Contact in Circular Arc Gears
圆弧齿轮点接触弹流基本模型的研究
Analysis of Normal Curvature and Contact Areas for Point Contact Sphere-Conical Roller Globoidal Indexing Cam Mechanism
点啮合球锥滚子弧面分度凸轮机构的曲率及接触域分析
Maximum depth of bend with glass in four point contact with horizontal plane. See diagram letter D
玻璃上四个点和水平面接触时的最大弯曲深度。见图表中D部分。
