spooler
美 
英
- na.络纱机；绕卷轴[筒子]工人
- 网络后台打印程序；假脱机程序；打印服务
英汉解释
例句
Back-up processing jobs should be scheduled some time after all overnight processing jobs so they are the last job in the spooler queue.
备份处理作业应该安排在所有夜间处理作业完成之后运行，所以它们是假脱机队列中最后一个作业。
If you choose to enable the AIX job spooler, be aware that any user on the system will be able to submit processes to the job spooler.
注意，如果启用AIX作业假脱机程序，那么系统上的任何用户都能够向作业假脱机程序提交进程。
A limited user can no longer print to a shared printer from a terminal server session after you restart the Spooler service in Windows 2000.
在Windows2000中重新启动后台处理程序服务之后，受限用户无法再从终端服务器会话打印到共享打印机。
When multiple clients have the same printer configured, they generally do so through a service called a spooler.
当多个客户端都配置同一台打印机时，它们通常通过一个名为后台处理程序（spooler）的服务来完成配置。
To do this, we recommend that you save your work, and then restart the computer to restart the Print Spooler service.
若要执行此操作，建议您保存您的工作，然后重新启动计算机以便重新启动后台打印程序服务。
The IBM AIX job spooler is a very useful built-in utility on all AIX systems but is rarely enabled or utilized.
IBMAIX作业假脱机程序是所有AIX系统上非常有用的内置实用程序，但是用户很少启用或使用它。
System deployment requests can be generated by multiple sources and accepted (queued) by the job spooler.
多个来源可以生成系统部署请求，作业假脱机程序接收它们（排队）。
Jobs that require sequential processing can be submitted to the job spooler through cron by running each job one minute apart.
需要连续处理的作业可以通过cron提交给作业假脱机程序，每个作业间隔一分钟。
These queued requests are then processed one at a time by the job spooler.
然后，作业假脱机程序每次处理一个排队的请求。
if you want to perform a rolling upgrade of a cluster that has a print spooler resource , you must consider two issues.
如果想对包含打印后台处理程序的群集执行滚动升级，那么必须考虑两个问题。
The AIX job spooler is integrated into the queue daemon, which is the same queue daemon that controls the printers.
AIX作业假脱机程序集成在队列守护进程中，队列守护进程也控制打印机。
The component manages a physical or virtual device for the system, for example, a device driver for a print spooler.
该组件管理系统的物理设备或虚拟设备，例如后台打印程序的设备驱动程序。
The changes you have made will not take effect until the spooler is restarted.
所做的更改在后台打印程序重新启动后才会生效。
A simple example of using the AIX job spooler for executing batch jobs is shown below.
下面给出一个使用AIX作业假脱机程序执行批作业的简单示例。
Once the printer is unused, the spooler can send the job to the printer without fear of contention from other print jobs.
一旦打印机闲置，后台处理程序就可以将作业发送到打印机，而不必担心其他打印作业争用。
The jobs will be processed, and after job completion the spooler will be empty.
ncftpbatch处理作业，作业完成之后spooler就空了。
see the following section , " upgrades that include a print spooler resource . "
详细信息，请参阅下一节“包含打印后台处理程序资源的升级”。
Only spooler properties will be displayed.
只显示后台打印程序属性。
I see an error message about "spooler" problems, or the printer is printing more slowly than usual.
打印机比平时打印更慢，或者我看到有关“后台打印程序”问题的错误消息。
This device is already in use by the spooler.
后台处理程序正在使用此设备。
These jobs are then sent to the spooler.
然后把这些作业发送给spooler。
The spooler file was not found.
没有找到后台处理程序文件。
The spooler is taking too long to start.
启动后台打印程序的时间太长。
As multiple people submit print jobs, the spooler stores the job to disk.
当多人提交打印作业时，后台处理程序将作业存储到磁盘。
Normally the job spooler queue bsh is disabled by default.
在默认情况下，作业假脱机程序队列bsh是禁用的。
This example uses the "at" scheduler to submit a job to the spooler at a specific date and time.
这个示例使用“at”调度程序在特定的日期和时间向假脱机程序提交作业。
In the modern data center environment, the need for a job spooler is greater than ever.
在现代数据中心环境中，作业假脱机程序的用途更广泛。
Submitting a job to the job spooler queue and to the at job scheduler simultaneously requires a compound command.
同时向作业假脱机程序队列和at作业调度程序提交作业需要一个复合命令。
Spooler service crashes when you submit a print job and an Event ID 7031 message is logged in the System log
提交打印作业时后台处理程序服务崩溃，并在系统日志中记录事件ID7031消息
back pressure drill out cement explosive squeeze cement fast line spooler shallow gas panels bridge plug
回压钻水泥塞炸药挤水泥快绳排绳器浅层气面板桥塞
Custom forms may not be updated when users connect to a spooler resource on a cluster node that is running Windows 2000 Server
当用户连接到运行Windows2000Server的群集节点上的后台处理程序资源时，自定义表单可能未更新
If you wish to remove the second job spooler queue device so that only one job at a time is executed, run the following commands
如果希望删除第二个作业假脱机程序队列设备，从而每次只执行一个作业，那么运行以下命令
Ferriere Nord Spooled Bar-in-coil Line: the First Spooler Plant in Industrial Operation
FerriereNord棒卷生产线：工业化运行中的第一台工字轮式卷取设备
Spooler subsystem app has encountered a problem and needs to close
后台打印程序子系统应用程序遇到问题需要关闭
Part of the spooler service for printing
打印池服务的一部分
Use of frequency-variable speed regulator in spooler modification
变频调速器在络纱机改造中的应用
Electrical spooler and drill line
电动倒绳机及钻井钢丝绳
Developing the Control System of Textile Spooler Based on ARM Microchip
基于ARM单片机的络丝机控制系统的研制
To view jobs in the spooler, use
使用以下命令查看spooler中的作业
To change or restart the Print Spooler service
更改或重新启动后台打印程序服务的步骤
