straightness
美 [streɪtnəs] 
英 [streɪtnəs]
- n.平直度；伸直度；直线性；正直度
- 网络直线度；真直度；率直
英汉解释
例句
The conclusion that sequential two-point method is the best fit method for straightness measurement was arrived at the end of this paper.
最后由此得出两点法与三点法相结合的组合方法是最适用于超精密直线度测量的误差分离方法的结论。
The appearance of Longjing tea is characterized by smoothness, flatness, straightness and its jade-green color.
龙井茶的外形特点是光、扁、平、直、色如翠绿。
NON-ROTATING STEM Non-rotating stem has close roundness and straightness tolerances and is burnished for a superior finish.
不旋转阀杆不旋转阀杆具有精密的圆度和平直度公差，并且经过抛光达到极高的抛光度。
The resultant phase change can be converted to a straightness measurement according to the relationship of the mirror angle.
由此产生的相变可转换为直线度测量，根据关系的镜子角度。
He was 17, could barely speak Mandarin and was awestruck by the straightness of the city's poplar-lined roads.
那年他17岁，说着满腔生硬的普通话，惊讶于宽阔的城市道路和大楼。
Straightness is an important performance of the rail. It influences running speed, safety and comfort of trains.
平直度是衡量钢轨质量的重要指标之一，它直接影响列车的运行速度、安全性及舒适性。
The formula of straightness error of the machined surface was also founded through geometrical analysis.
通过几何分析，建立了加工表面的直线度公式。
The system structure and the mathematic model of least square method to evaluate the straightness errors are introduced.
介绍了系统结构原理以及空间直线度误差的最小二乘评定法数学模型。
To develop straightness in a horse, you will need to develop the strength and suppleness of both of his sides.
去训练马的正直，需要训练马匹两侧的力量和柔软。
The sampling program in straightness measurement was investigated by a simulation experimental method.
采用仿真实验方法对直线度测量的采样方案进行了研究。
Perform this measurement for all finished faces, and take the maximum as the measured value of the straightness.
对工件所有精加工面进行测量，取最大值作为直线度的测量值。
The results show that the device can avoid the influence of bad straightness of the pipe and advance the machining quality.
研究结果表明，此夹紧装置能够避免钢管不直度的影响，提高钢管加工的质量。
They've understood there is a generalized concept of straightness. It's called a geodesic.
他们已经知道有一个广义概念的直线，它被称为测地线。
The impacts of the straightness and the residual stress are very many, and one of which is the curvature before straightening.
影响钢轨平直度和残余应力的因素很多，其中钢轨的矫前弯曲度就是其中之一。
If you get impatient and try to speed things up, you'll ruin the sharpness, the straightness of the blade.
如果你失去耐心，一味图快，就会破坏刀锋的锐利和平直。
Measuring of overall length, molded breadth, molded depth and straightness of keel plate after completion of hull construction.
船体完工后总长、型宽、型深和龙骨板桡度测量
Compared with straightness error separating technique, flatness error separation technique still has many questions not have been solved.
最后指出相对于直线度误差分离技术已经趋于成熟而言，平面度误差分离技术还存在诸多问题有待于解决。
Precision stem and packing chambers. Straightness, roundness and fine finish of stem and packing chamber wall are essential.
精密加工的阀杆和填料腔。阀杆和填料腔壁的平直度、圆度和表面光洁度是最基本的要求。
The straightness of smoke is determined by the unique geography and climate in the northern and northwestern areas.
烟何以直，这是西北及北方独特的地理气候决定的。
Mark the centre line of each steel plate before the splicing work, check the straightness by tense wire.
拼板前划出每块钢板各自的中心线，用符号表示，用拉紧的线检查平直度。
The fit should be approximately the same on both sides of the ring to insure proper straightness.
配合度应两面基本相同，以确保环规的直线度。
To evaluate the quality of damper connecting rod, roundness and straightness are important technical indices.
圆度和直线度是评价汽车减振器连杆质量的关键技术参数。
A method to evaluate spatial straightness errors adopting particle swarm optimization (PSO) is proposed.
提出了一种满足最小区域法的空间直线度误差评价的新方法一粒子群算法。
Flexible sheets for waterproofing - Determination of length, width and straightness - Part 1 : bitumen sheets for roof waterproofing.
防水用柔性薄板.长度宽度和垂直度的测定.第1部分：屋顶防水用沥青片
curve: a line that deviates from straightness in a smooth, continuous fashion.
曲线：一条光滑并连续地偏离直线的线。
The turned-in toes, the hand position, the straightness of the body. The attention to the most basic skill.
脚趾向里弯曲、手的位置、身体正直，注意的都是最基本的技巧。
The minimum zone method meets the minimum condition for evaluating the straightness, however it is difficult to accomplish computerization.
最小区域法是符合最小条件的一种直线度误差评定方法，但较难实现。
Thekey process improving fibre straightness is drawing process in carding system, however, in combing system, is combing process.
在普纱系统中提高纤维伸直度的关键工序是并条工序。
In the production process, rolling and compression molding are combined. And the straightness is also corrected repeatedly.
制作过程中，卷制和模压工艺相结合，并多次矫正直线度。
Wood-based panels. Determination of dimensions of boards. Part 2 : determination of squareness and edge straightness.
木基板.板尺寸的测定.第2部分：直角度和边直度的测定
Behind it thy seat is woven in wondrous mysteries of curves, casting away all barren lines of straightness.
幕后的你的座位，是用奇妙神秘的曲线织成。抛弃了一切无聊的笔直的线条。
Using the parallel to the drafting process, to improve the orientation of the fibers and straightness.
采用顺牵伸工艺，以改善纤维的定向性和伸直度。
The manufacturer will also check for concentricity and straightness , or run -out .
厂商还将检查同轴正派，还是磨合。
Based on the technique of laser collimation and photoelectric inspection, the device for measuring the straightness of bore is developed.
基于激光准直和光电探测，研制炮管直线度测量装置。
A new algorithm of minimum zone method for evaluating straightness error is put forward in this paper.
提出了最小区域法评定直线度误差的新算法———缩小约束域的有效特征点法。
Discusses the average value and limiting error of straightness error.
讨论了直线度误差的平均值及其极限误差问题；
The straightness of barrel has direct relationship with the emitting, operating life and the flying attitude of cannonballs.
火炮身管的直线度直接关系到火炮发射的可靠性、使用寿命以及炮弹的飞行姿态。
The invention can confirm the straightness of butted raster rulers.
本发明能有效地保证对接后光栅尺的直线度。
What is the allowable deviation from straightness for a 40 foot long primary truss member ?
对40英寸长的主珩架构件允许的直线度偏差是多少？
Experiment results showed that WEDM in atmosphere offers advantages such as better straightness and higher material removal rate.
实验结果表明，气中线切割加工具有加工表面直线度好、加工速度（材料去除率）高等优点。
