tapered-bore

tapered-bore

美 　英

• 网络圆锥孔；锥型孔；圆锥形内孔

例句

Bearings with a tapered bore are always mounted with an interference fit .

带圆锥孔轴承始终以过盈配合安装。

For bearings having a tapered bore , inner rings are always mounted with an interference fit .

对于圆锥孔轴承，内圈的安装始终采用过盈配合。

A few relatively wide bearings have inner rings with a tapered bore of 1: 30.

少数相对较宽的轴承带锥度为1：30的内圈。

However, some bearings with a tapered bore 1: 12 can be supplied (fig 18).

但是，一些轴承可提供锥度为1：12的圆锥孔设计（图18）。

Spindle tapered bore no bruising, grind.

主轴锥孔无碰伤、研伤。

Bearing with tapered bore, taper 1: 12, intermediate ring between the outer rings and pressed steel cages (fig 14).

带有锥度为1：12的圆锥孔、外圈之间的中隔圈和钢板冲压保持架的轴承（图14）。

It is very difficult to grind tapered bore in a large diameter gear without dedicated equipment.

由于没有专用设备，大直径齿轮锥孔磨削非常困难。

Mounting - Mounting bearings with a tapered bore - Measuring the clearance reduction

安装带圆锥孔轴承-测量间隙减小值

CARB bearings with a tapered bore can be mounted on smooth or stepped shafts using

圆锥孔CARB轴承可安装在光滑轴或阶梯轴上，安装时使用

Spherical roller bearings with extended inner rings, spherical roller bearings with tapered bore and extended inner rings

宽内圈调心滚子轴承、宽内圈圆锥孔调心滚子轴承

A simple way of repairing tapered bore of boring machine spindle

镗床主轴锥孔的简易修复方法

Application of FEA in Design of Radial Internal Clearance for Four Row Tapered Roller Bearing with Tapered Bore

FEA在圆锥孔四列圆锥滚子轴承径向游隙设计中的应用

Rolling bearings; self aligning ball bearing; double row with cylindrical and tapered bore

滚动轴承.径向调心滚珠轴承.双列圆柱和圆锥孔

Suitable methods for mounting spherical roller bearings with tapered bore are

安装带圆锥孔球面滚子轴承的合适方法

Rolling bearings; plummer block housings for rolling bearings of diameter series 3 with tapered bore and adapter sleeve

滚动轴承.带锥形孔和紧定套.直径系列3的滚动轴承用立式轴承座

Mounting bearings with a tapered bore

带圆锥孔轴承的安装

Mounting tapered-bore spherical roller bearing

锥孔调心滚子轴承安装

Cylindrical roller bearings with tapered bore

有圆锥孔的圆柱滚子轴承

Bearings with a tapered bore

圆锥孔轴承

Grinding Process of Tapered Bore in a Large Diameter Gear

大直径齿轮锥孔磨削工艺

Direct shaft mounting, tapered bore

锥孔轴承直接装在轴上

Mounting bearings with tapered bore

安装带圆锥孔的轴承

Bearings with tapered bore on adapter sleeves: series SNL 5 and SNL 6 (table)

装在紧定套上的圆锥孔轴承：SNL5和SNL6系列（表1）以及