ECAP
美 
英
- 网络等通道转角挤压(equal channel angular pressing)；等径角挤压；等通道角挤压
例句
Pure aluminium sintered material was successfully experienced ECAP of multiple passes.
以纯铝烧结材料为对象，实现了多道次挤压。
Steel and other iron-based alloys can have ultrafine grains and improved properties by equal channel angular processing(ECAP).
钢和铁基合金通过等径弯曲通道变形（ECAP）可获得超细晶组织，从而改善材料的性能。
The deformation and strain rate is not equal in different part of ECAP materials, and this is beneficial to shearing deformation.
材料不同部位变形不均匀，不同部位的应变速率不均匀都有助于剪切变形的进行。
With increasing in the temperature of ECAP, magnesium alloy (AZ31) grain grew.
随着ECAP加工温度的升高，镁合金（AZ31）晶粒长大。
Ultrafine-grained 2J4 hysteresis alloy processed by equal-channel angular process(ECAP), has the average grain size approximate 0.
利用等通道弯曲挤压的方法得到的晶粒平均尺寸大约为0。
In this paper, the author simulates the process of ECAP by DEFORM-3D special software. Then we design and make the ECAP mould.
本文首先借助于DEFORM-3D软件模拟并分析了等径角挤压过程，然后自行设计、制作了模具。
Grain-Refining Mechanism of ECAP and Its Effect on Microstructures and Mechanical Properties of Pure Al
ECAP细晶机制及对纯铝显微组织和力学性能的影响
Study of ECAP and Control of Materials Structure and Property
ECAP变形与材料组织性能控制的研究
Effect of Heat Treatment on Microstructure and Property of ECAP Processed Austenitic Stainless Steel
热处理对等通道挤压后奥氏体不锈钢组织与性能的影响
Application of Environmental Parameters ECAP and IEH to the Analyses of the Severe Convective Weather
ECAP等环境参数在强对流天气分析中的应用
Manufacture and Mechanical Properties of Ultrafine Grain Aluminum Alloy by ECAP
采用ECAP制备亚微晶铝合金及其力学性能
Study of ECAP Distortion and Structure Refinement for No. 45 Steel
45钢等径弯曲通道变形及组织细化研究
Structure transformation rule of ECAP-deformed low carbon steel
ECAP变形低碳钢的组织变化规律
Study on Microstructure Properties for Ultra- Fine Alloy Using ECAP
等通道转角挤压超细化合金组织性能的研究
Study on Microstructure of Magnesium Alloy Deformed by ECAP
等通道挤压后镁合金的微观结构研究
Microstructure and Properties of Cu-Cr Alloy Processed by ECAP
铜铬合金等径角挤压后的组织与性能
The FEM numerical simulation of loadings in ECAP
ECAP过程中载荷变化规律的有限元模拟
