astm
美 [eɛsti'ɛm] 
英
英汉解释
abbr. | 1. (=American Society for Testing Materials)美国材料试验学会 |
英英解释
例句
The physical properties of the compound have come up to ASTM standard and can compare with some commercial products both at home and abroad.
该胶料的各种物理性能均达到了美国ASTM标准规定的指标，与国内外几种商品防水卷材的性能相当。
This is an example of where the matching nut is not always explicitly called out in the ASTM standard.
这是一个例子，那里的配套螺帽并不总是明确要求指出，在ASTM标准。
The penstocks used for Yellow River Xiaolangdi is of super size, it is made of steel plate A517 under American Standard ASTM.
黄河小浪底水利枢纽工程引水压力钢管属超大型压力钢管，采用美国ASTM标准A517钢板焊制。
To produce ASTM conversion biodiesel requires titration and a further four- 5 second shakes over the space of an hour.
生产酯转化反应的生物柴油需要滴定法和经过一小时间歇性的四五秒摇晃。
The standard goes further to state that when used for pipe flanges, Grade B bolts require a Heavy Hex Grade A nut under ASTM A563.
标准进一步去阐明，当使用为管子安装边缘，等级B螺栓要求一枚重的六角形的成绩A坚果在ASTMA563之下。
It was originally developed for metallic joints, but it is now also referenced in the ASTM standard for plastic fittings cited above.
原先是从金属连接件发展来，但是现在也在ASTM标准中引用，适用于上述引用的塑料连接件。
ASTM D 5025, Standard Specification for Laboratory Burner Used for Small-Scale Burning Tests on Plastic Materials.
ASTMD5025塑料材料的小型燃烧试验用实验室燃烧器的标准规范
ASME Boiler and Pressure Vessel Code Section II material that also meet the requirements of the listed ASTM specification may also be used.
ASME锅炉和压力容器规则节II材料也符合ASTM规格说明的要求，因此也可以采用。
Valve Body, Cover, Tailpiece and Control Stop shall be in conformance with aSTM alloy Classification for Semi-Red Brass.
阀体、阀盖、附属件和控制止回阀均符合美国材料试验协会aSTM的半红铜合金分类标准。
All tests were run under laboratory conditions, ASTM testing procedures. The data are intended as a general guide only.
以上数值系参考ASTM方法所测得，仅供选择用途品级之参考。
Standards most frequently referenced in plastic piping specifications are ASTM Standards.
塑料管道规格说明中最常用到标准是ASTM标准。
Our ASTM C 1147 certified plastic fabricators offer quality construction for all of your ventilation components.
我们的经过认证的ASTMC1147塑料加工厂为您所有组件提供通风质量建设。
The random vibration used a truck-and-air profile in accordance to the American Society for Testing and Materials Method ASTM D4728.
随机振动用卡车和空中姿态按照美国材料与试验协会美国ASTMD4728方法。
Single ASTM D6866 results can be tied to specific facility or industry emissions for trading and regulatory purposes.
出于交易和监管的目的，单项ASTMD6866结果可以和特定的设施或工业排放量关联。
The results show that: With the coiling temperature increasing, the strength and ASTM reduced gradually.
结果表明：随着卷取温度的升高，钢的强度和晶粒度等级下降。
The material of valve should be in accordance with reference of API code and ASTM code.
阀门的材料符合ASTM和API规范要求。
ASTM workgroup using the incident data, date analysis, expert opinions and other information to determine the magnet requirements.
美国材料实验协会的工作小组就事件数据，数据分析及专家意见去确定磁石的要求。
ASTM D Standard terminology relating to paint, Varnish, Lacquer, and Related products.
有关涂料、清漆、生漆和其它相关产品的标准术语。
ASTM has identified the rex yarn number as the recommended standard.
美国材料实验协会已经确认，特克斯已作为推荐使用的纱线细度标准。
The electrodes follow the ASTM Standard D257 entitled "DC Resistance or Conductance of Insulating Materials. "
其电极满足ASTM标准D257“绝缘材料的直流电阻或电导”的要求。
The web and flanges of the main girders were fabricated from ASTM A441 steel.
主梁的腹板和翼缘用ASTMA441钢制造。
The ASTM standard method D2500-66 for cloud point measurement covers transparent petroleum products.
用于测定浊点的ASTM标准法D2500-66已包括轻质油品。
Sample size for testing shall be based upon ASTM F1470 Sample Level A, acceptance number in all cases is zero defects.
用于测试的样本大小（尺寸）将以A级样本ASTMF1470为依据，在所有情况下的接受数目（接收号）应是零缺陷（无瑕疵）。
The pump casing, impeller, motor housing and stationary base elbow shall be manufactured of close-grained cast iron, ASTM A48, Class 30.
泵壳，叶轮，电机壳和固定底座弯头都应该采用符合美国材料试验协会ASTMA48级别30致密铸铁制造。
ASTM D1159-01 Standard Test Method for Bromine Numbers of Petroleum Distillates and Commercial Aliphatic Olefins by Electrometric Titration.
电化学滴定法测量石油馏分及商用脂族烯烃的溴值试验方法。
The fatigue crack growth rate tests were conducted using compact tension specimens in accordance with ASTM E647.
疲劳裂纹扩展速率进行了测试采用紧凑的张力，依照ASTME647标本。
Chromatic aberration is controlled as per ASTM standards.
色差控制按美国ASTM标准。
Revising ASTM standard to show specific rope, other equipment and procedures.
修改ASTM标准，制定了有关绳索、其它设备和步骤的要求。
The web and flanges of the main girders were fabricated from ASTM A441 steel.
主梁的腹板和翼缘用ASTMA441钢制造。
Products meet the American ASTM technical standards, technical standards and our Japanese JISK Traffic JTG F41-2008 technology standard.
产品满足美国ASTM技术标准，日本JISK技术标准和我国交通部JTGF41-2008技术标准。
Could you look for a supplier that could provide us with the following: ASTM A240 316 Plate - 6mm thick, laser cut into the correct shape.
你能寻找一个供应商，可以提供下列方式：美国ASTMA240316板-6毫米厚，激光切割形状。
All our products are inspected carefully before packing, so you only get EN71- and ASTM-complied products.
我们所有的产品包装前都会经过仔细的检查，所以你会得到无品质问题的产品。
Electrical conductance of cement paste, mortar and concrete at different ages is tested by ASTM C1202.
通过ASTMC1202（直流电量法）测定了不同组成材料净浆、砂浆、混凝土在不同龄期的电通量。
All our products are passed EN- 71, ASTM etc safety standard, and most products already got the CE certificate.
我们所有的产品都能通过EN-71，ASTM等安全标准，大多数产品已经拿了CE认证。
An American Society for Testing and Materials (ASTM) label.
美国检测与材料协会（ASTM）的标签。
Usually determined in the United States by ASTM Method D 893.
在美国一般用美国材料试验学会D893方法测定。
This leak testing method is according to the ASTM and is fully validated.
此泄漏检测方法是根据ASTM和充分验证。
Note: The 6513 uses a non-metallic based toe cap that meet ASTM impact and compression safety standards.
注：6513使用非金属的鞋头，满足ASTM的冲击和挤压的安全标准。
ASTM D 3960-93 describes the various test methods used in the calculation of VOC.
93描述了计算VOC时用到的几种不同的测试方法。
ASTM D2896-03 Standard Test Method for Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration.
电位高氯酸滴定法对石油产品碱值的试验方法。
Click for ISO and ASTM tables of physical properties in PDF format.
点击即可得到ISO和ASTM物理性能表。
ASTM D2710-99 Standard Test Method for Bromine Index of Petroleum Hydrocarbons by Electrometric Titration.
电化学滴定法对石油烃溴指数的测试方法。
