carburized
美 
英
例句
The facts have proved that this instrument can meet the need of actual manufacture for the depth of carburized layer measurement.
实践证明，该仪器完全能满足生产实际对渗碳层深度的测量要求。
Rare earths can getcarburized granules on the surface of alloy steel fined, with diffusion even, the carburized layer thickened.
稀土能使合金钢表层碳化物颗粒细化，均匀弥散分布，碳化物层加厚。
The metal carburized layer depth is one of the major technical parameter to evaluate the quality of carburized components.
渗碳层深度是衡量渗碳件质量的主要技术指标之一。
This paper compared several testing methods of carburized depth of high air pressure drill and evaluated their accurately and practicality.
比较了高风压钻头渗碳层深度的不同检验方法，并对其正确性和实用性进行了探讨。
Results showed that contact fatigue property of carburized gear samples was better than that of nitrided gear samples.
试验结果表明，渗碳处理试样接触疲劳性能优于调质氮化的试样。
Steel - Determination and verification of the depth of carburized and hardened cases.
钢.渗碳层和硬化层深度的测定和检验
Furthermore, the kinetic equation of carburized layer growth was presented.
此外，还给出了渗层生长的动力学方程式。
Eddy current testing system of carburized materials was developed by using ANSYS software as second development platform.
以通用有限元分析软件ANSYS作为二次开发平台，开发了面向渗碳材料的涡流测试系统。
State structure and transformation of carbides in carburized layers are analyzed by use of telescope, X-ray diffraction and energy spectrum.
通过电镜、X射线衍射和能谱，分析了渗碳层中碳化物形态结构及转变。
The requirement for retained austenite content in the carburized or carbonitrided case will vary with the type of product.
不同产品对残余奥氏体量的要求量是不同的，可采用相应的热处理工艺进行控制。
Auto or manual measurement Computer picture analvis Accurate hardness correction Hardness gradient graph of carburized or nitrided laver .
自动或手动测试，计算机图象分析，软件硬度精确修正，渗碳层，氮化层梯度图示。
Overseas studies on carburized high temperature bearing steels has been summarized in the paper.
概述了国外渗碳型高温轴承钢的研究情况。
Warring States Shihai mastered solid block of iron carburized steel quenching methods and techniques.
战国时还掌握了块炼铁固态渗碳制钢的方法和淬火技术。
the term green refers to turned product that has not yet been carburized nor hardened.
毛坯的定义是车加工成的产品但还没有进行渗碳或者硬化处理。
High carburized rate was attained by using Al 2O 3 fluidized bed furnace.
刚玉流动粒子炉渗碳能够获得较高的渗碳速度。
These are useful for the studies and applications of carburized high temperature bearing steels in our country.
为国内开展渗碳型高温轴承钢的研究和实际应用提供有益的参考。
The Preparation for the Carburized Quenching and Tempering Process of the Long Slide Plate
长滑板件的渗碳淬回火工艺的编制
Numeric Simulation of the Electromagnetic Characteristics in a Carburized Layer
渗碳层电磁特性的数值模拟
State of Process and Development Trend of Automobile Carburized Gear-used Steel and Heat Treatment Technology
汽车渗碳齿轮用钢及热处理工艺的现状和发展趋势
Sintered ferrous materials, carburized or carbonitrided - Determination and verification of case-hardening depth by a micro-hardness test
烧结铁类材料.渗碳或碳氮共渗.用微型硬度测试法测定和验证外层淬火的深度
Technical Approaches of Improving Carburized-case Depth Distribution and Microstructure for Gears
直齿轮渗碳层厚度分布与组织改善技术途径
Control and Determination of Retained Austenite Content in Carburized and Quenched Alloy Structural Steels
合金结构钢渗碳淬火后渗层残余奥氏体的控制
Investigation on carburized predecessor matrix of gradient cemented carbide
梯度硬质合金渗碳前驱体的研究
Technological measures of controlling grinding fracture on carburized gears
控制渗碳齿轮磨齿裂纹的工艺措施
The Influence of Isothermal Normalizing on the Distortion of Automotive Gears Carburized and Quenched
等温正火对汽车齿轮渗碳淬火变形的影响
A Simple Real-time Emulation for Concentration Gradient in Carburized Layer
渗碳浓度梯度的简洁实时仿真
Study on the Preparatory Heat Treatment Technology about Two Type Material of Automobile Carburized Gear
两种汽车渗碳齿轮新材料的预备热处理工艺探讨
Surface-to-surface contact analysis of sliding bearing for roller bit with carburized layer and copper alloy strips
含渗碳层和铜合金牙轮钻头轴承的面接触分析
Calculation of Induction Voltage for Eddy Current Testing of the Carburized Depth
涡流检测渗碳层深度的感应电压计算
Numerical Simulation System of Carbon Concentration Distribution in Carburized Layer of the Usual Carburized Materials
常用渗碳材料渗层碳浓度分布数值模拟系统
Carburized Characteristics and Mechanical Properties of Novel Microdistortion Gear Steel
新型微变形齿轮钢渗碳特性及力学性能
Pasty Carburizing Technology and the Effect of Post-Carburization Heat Treatment on Wear-Resistance of the Carburized Layer
膏剂渗碳工艺及渗后热处理对其渗层耐磨性的影响
Microstructure and Properties of Carburized Bevel Gear by BH Energizing Technology
BH催渗技术对渗碳螺旋伞齿轮组织和性能的影响
Influences of Heat Treating Process on Bending Fatigue Strength of Carburized Gears
热处理工艺对渗碳淬火钢齿轮弯曲疲劳强度的影响
Contact fatigue strength comparison of laser-hardened gear and carburized gear
激光淬火齿轮与渗碳淬火齿轮的接触疲劳强度对比实验研究
Friction and Wear Behavior of Double Glow Plasma No-Hydrogen Carburized Layer on Titanium Alloy
钛合金表面双层辉光离子无氢渗碳层摩擦磨损性能研究
Methods of Preventing Tooth Grinding Cracks for Carburized Hardened Gear
渗碳淬火齿轮磨削裂纹的防止
Failure Analysis of the Breaking of Reducing Carburized Gear
减速器渗碳齿轮断裂失效分析
Study on Surface Residual Stress of Carburized and Quenched Automobile Gears
热处理和磨削工艺对渗碳淬火汽车齿轮残余应力的影响
Analysis on Distortion of Rear-axle's Passive Gears Carburized and Hardened
后桥从动锥齿轮渗碳淬火的变形分析
