cast-in-place
美 
英
- n.现场浇铸；现场浇捣现浇
- 网络灌注；现场浇筑；现场浇注
英汉解释
例句
It was found that the cast-in-place tubular pile gives prominence to its vertical bearing capacity.
现场试验研究表明：沉管灌注筒桩竖向承载性能突出；
The test results would be helpful to the large diameter rock-socketed cast-in-place piles in the soft bedrock under lateral loads.
试验得出结论对软质基岩横向承载力桩的研究和设计具有重要参考价值。
The programme used cast-in-place reinforced concrete frame structure, the main load-bearing structure for the two-way framework.
本方案采用钢筋混凝土现浇框架结构，主体结构为双向承重框架。
These advantages make cast-in-place concrete hollow floor are applied in a growing number of construction.
这些优点使得现浇混凝土空心楼盖在越来越多的建筑工程中得到应用。
The urethane liner is cast in place to form a continuous liner throughout the entire body, chest, packing chamber and flange face area.
氨基甲酸乙酯衬垫采用定点浇铸工艺，在整个阀体、阀腔、填料腔和法兰面区域表面形成全面连续的覆盖衬垫。
The cast-in-place pile is in general engineering deep foundation forms, pile quality plays a vital role to construction safety.
钻孔灌注桩是工程中常用的深基础形式，其成桩质量对工程安全有着至关重要的作用。
construction batch strength and design of mix proportion for underwater concrete cast in a major diameter cast in place pile.
论述大直径灌注桩水下浇注混凝土时的材料选择、设计参数选择、施工配制强度及配合比设计。
The paper introduces the influence of mud proportion on the excavated hole, the hole cleaning of the cast-in-place and concreting.
介绍了泥浆比重对钻孔灌注桩成孔、清孔及混凝土灌注的影响，并提出相应的技术措施。
Combined with the actual work, the structure crack causes of cast-in-place reinforced concrete and prevention measures are discussed.
结合工作实际，针对现浇钢筋混凝土结构裂缝的产生原因与防治方法进行了论述。
Segmental support cast-in-place prestressed concrete continuous beam bridge has been used more and more widely in bridge construction.
分节段支架现浇预应力混凝土连续梁在桥梁建设的应用日趋广泛。
The interlayer of laminated plastic articles was fabricated by using polyurethane as cast material through the cast-in-place process.
以聚氨酯（PU）为浇铸料，用就地灌注的工艺制造层合玻璃中间层。
Cast-in-place reinforced concrete floor slab, as a good venue geological conditions, based on an independent basis under the column.
楼板现浇钢筋混凝土楼板，由于场地地质条件良好，基础采用柱下独立基础。
The cast-in-place thin-wall tubular pile is a new pile type with its development based on diving casing cast-in-place pile.
现浇薄壁筒桩是在沉管灌注桩的基础上加以改进发展而成的一种新桩型。
The force and deformation of the template of the cast-in-place concrete beams and columns is simulated in this paper.
本文模拟了现浇混凝土梁和柱的浇筑过程中，模板的受力与变形情况。
Therefore, to optimize the design of the cast-in-place concrete hollow floor has great significance.
所以对现浇混凝土空心楼盖进行优化设计具有重要意义。
Discussion on "Experimental research on vertical bearing properties of base-grouting bored cast-in-place pile"
关于“后注浆钻孔灌注桩承载性状试验研究”的讨论
P Uncertainties related to the cross-section of cast in place piles and concreting procedures shall be allowed for in design.
现浇件横截面和浇筑过程的不确定性在设计时应予考虑。
Now a brief analysis of common problems and construction quality control measures of cast-in place pile are analyzed.
现简要分析钻孔灌注桩常见施工质量问题及防治措施。
ROAD SAFETY BARRIERS. CAST IN PLACE CONCRETE SEPARATORS AND WALLS. SPECIAL STEEL ACCESSORIES.
道路安全护板.隔板和浇铸的水泥墙.专用金属部件和配件
Inerratic slant cracks appeared on the box girder webs of one continuous rigid frame bridge during cast in place cantilever.
某连续刚构桥在箱梁悬臂施工时腹板出现规则的斜向裂缝。
This basic form is pile, the stair is the stair of cast-in-place modes in Chinese operatic music of armored concrete .
本方案基础形式采用桩基础，楼梯为钢筋混凝土现浇板式楼梯。
Many scholars at home and abroad make many researches on frame with cast-in-place floor, but many problems need to solve.
许多国内外学者在现浇楼板框架结构做了许多工作，可仍有许多不足没有解决。
The stairs are the cast-in-place board type stairs of reinforced concrete.
本方案楼梯为钢筋混凝土现浇梁式楼梯。
This paper elaborates on the design and construction of cast-in-place beam bracket in the beach region.
详细介绍了海滩地区现浇梁支架设计及施工情况。
This scheme adopts the cast-in-place frame structure of reinforced concrete.
本设计采用钢筋混凝土现浇框架结构。
Bore-hole cast-in-place pile was filled outside the foundation pit.
对于基坑外的部分，采用钻孔灌注桩补桩。
Standard Test Method for Compressive Strength of Concrete Cylinders Cast in Place in Cylindrical Molds
在圆柱模型中现场浇注混凝土圆柱体的抗压强度试验方法
Application of Driven Cast-in-place Pile Grouted at the Bottom of Pile for Highrise Buildings's Construction
桩底注浆钻孔灌注桩在高层建筑中的应用
The strength finite element analysis of the expanding arms of a new extruding machine for cast-in-place pile
新型变径挤扩灌注桩成型机挤扩臂强度有限元分析
Precaution and Treatment to Collapse of Percussive Bored Cast-in-place Pile in Complex Formation in Tideland by the Sea
滨海潮间带复杂地层条件下冲击成孔灌注桩塌孔事故的预防及处理
Numerical analysis for formation time of bearing capacity of cast-in-place concrete pile in permafrost regions of Mohe County
漠河多年冻土区砼灌注桩承载力形成时间数值分析
The strength finite element analysis of the expanding arms of a new extruding machine for cast-in-place pile
新型变径挤扩灌注桩成型机挤扩臂强度有限元分析
Precaution and Treatment to Collapse of Percussive Bored Cast-in-place Pile in Complex Formation in Tideland by the Sea
滨海潮间带复杂地层条件下冲击成孔灌注桩塌孔事故的预防及处理
Measurement and analysis of the vibration effect induced by large diameter bored cast-in-place pile in its piling process
大直径钻成孔灌注桩在桩基施工中振动影响的测试与分析
Analysis and research on the bottom post-grouting effect of cast-in-place bored pile
钻孔灌注桩桩底后注浆效果分析与研究
Study of indexes of continuous girders (double track line) erected with cast-in-place cantilever method
悬浇连续箱梁（双线）梁部指标的研究
Accident Analysis and Strengthening Plan of a Defective Cast In-place Short Pile Foundation
缺陷性钻孔灌注短桩基础质量事故及其加固
On construction technique of shaping cast-in-place bored pile head at a time
锅锥成孔灌注桩桩头一次成型施工工艺
Analysis The Causes of The Cast-in-place Reinforced Concrete Floor's Crack And for Its Precautions
现浇钢筋砼楼板裂缝的成因与防治措施
External Thermal Insulation Construction on net-Polystyrene Composite Expanded Polystyrene Granule in Cast-in-place Concrete
现浇有网聚苯板复合胶粉聚苯颗粒外墙外保温施工技术
