ferritic
美 [fə'rɪtɪk] 
英 [fə'rɪtɪk]
- adj.铁氧体的
- n.铁素体
- 网络铁素体的；铁素体结构；肥粒铁系
英汉解释
例句
The proportion of equiaxed grain of ferritic stainless steel treated with vibration and refrigeration could be increased up to 80%.
铁素体不锈钢液经振动激发形核处理后，凝固组织中的等轴晶率超过了80%。
A ferritic stainless steel alloy having a reduced tendency to form silica on at least a surface thereof also is provided.
也提供了在至少其表面具有减少的形成二氧化硅倾向的铁素体不锈钢合金。
A soft ferritic stainless steel was introduced which could be manufactured for the commemorative and entertaining coin.
介绍一种可以制作纪念币以及娱乐用币材料的软质铁素体不锈钢。
Adjusting its carbon content can change the physical and chemical properties of the high chromium ferritic stainless steel.
调整高铬铁素体不锈钢中的碳含量，可改变其物化性能。
Optimum ductility is obtained with a ferritic matrix, so all NIBCO ductile iron is treated with a ferritizing annealing cycle.
由于最佳的韧性都是来自铁素基体，所以所有美国尼伯科球墨铸铁都经过铁素体退火韧化过程处理。
Therefore, thin strip casting technique has advantage on improving the formability of ferritic stainless steel.
因此，薄带连铸技术在改善铁素体不锈钢的成形性能方面具有显著优势。
Macrographic determination of the ferritic or austenitic grain size of steels.
钢的铁素体或奥氏体晶粒度的测度。
Non-destructive testing of steel forgings. Part 4 : ultrasonic testing of austenitic and austenitic-ferritic stainless steel forgings.
钢锻件的无损检验.第4部分：奥氏体和奥氏体铁素体不锈钢锻件的超声波检验
Welding and allied processes - Determination of hydrogen content in ferritic steel arc weld metal.
焊接和有关工艺.铁素体钢电弧焊金属中氢含量的测定
Ma in measurements of improving the quality of ferritic stainless steels are summarized briefly.
总结了改善铁素体不锈钢质量的主要措施。
Strain-induced corrosion cracking in ferritic components of BWR primary circuits.
BWR一回路铁素体部件的变形诱导腐蚀裂纹…[中国核科技信息与经济研究院]。
In contrast, solid wire with little inclusions and higher toughness, the welding is more suitable for TCS ferritic stainless steel.
相比之下，实芯焊丝焊缝的夹杂物含量低，韧性较高，更适合TCS铁素体不锈钢的焊接。
In this article, the technology and the conditions of producing as-cast ferritic nodular cast iron are introduced.
本文介绍了生产铸态铁素体球铁的条件及其工艺措施。
FOUNDRY PRODUCTS. SILICON MOLYBDENUM FERRITIC CAST IRON.
铸造产品.硅钼亚铸铁
Non-destructive testing of steel forgings. Part 3 : ultrasonic testing of ferritic or martensitic steel forgings.
钢材锻造的非损试验.第3部分：铁素体钢和马氏体钢锻造的超声波试验
P92 steel is a new type of ferritic refractory steel which has quickly developed at home and abroad in recent years.
P92钢是近年来国内外迅速发展的新型铁素体耐热钢。
Welding - Recommendations for welding of metallic materials - Part 2 : arc welding of ferritic steel.
焊接.金属材料焊接的推荐规范.第2部分：铁素体钢的电弧焊
This article gives the direction to produce and apply ultra pure ferritic stainless steel in China.
指出了我国在超纯铁素体不锈钢生产和应用方面今后努力的方向。
For ferritic bolting materials intended for service at low temperatures, ASTM A194 Gr. 4 or Gr. 7 nuts are recommended.
对于应用在低温环境的铁素体螺栓材料，推荐采用ASTMA194等级4或等级7螺母。
Metallographic examination; determination of the ferritic or austenitic grain size of steel and ferrous materials
金相检验方法.钢和铁材料的纯铁体和奥氏体粒度的测定
Study of the Welding Performance of TCS Ferritic Stainless Steel Used on Railway Vehicle
铁路货车车体用TCS铁素体不锈钢焊接性能研究
Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing Parts, Suitable for Low-Temperature Service
低温受压零件用铁素体和马氏体钢铸件规格
Steel forgings for pressure purposes - Ferritic and martensitic steels with specified elevated temperature properties
压力容器用钢锻件.具有特殊提高温度特性的铁素体钢和马口铁钢
Test Method for Conducting Drop-Weight Test to Determine Nil-Ductility Transition Temperature of Ferritic Steels
进行下落重力试验测定铁素体钢尼尔延展性过渡温度的测试方法
Non-destructive testing of steel forgings - Ultrasonic testing of austenitic and austenitic-ferritic stainless steel forgings
钢锻件的无损检验.奥氏体和奥氏体-铁素体不锈钢锻件的超声检验
Ferritic-pearlitic engineering steels for precipitation hardening from hot-working temperatures
从工作高温沉淀硬化用铁素珠层工程钢
Standard Specification for Carbon Structural Steel Standard Specification for Ferritic Malleable Iron
碳素结构钢技术规范
Standard Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes
铁素体合金钢管、奥氏体合金钢管和不锈钢管一般要求的标准规范
Standard Practices for Detecting Susceptibility to Intergranular Attack in Ferritic Stainless Steels
铁素体不锈钢晶间腐蚀敏感性检测
ferritic - pearlitic steels for precipitation hardening from hot - working temperatures
热加工温度下沉淀硬化用铁素体-珠光体钢板材
Effects of Antibacterial Treatment on Microstructure and Properties of Copper-bearing Ferritic Stainless Steel
抗菌处理对含铜铁素体不锈钢组织和性能的影响
Standard method for conducting drop-weight test to determine nilductility transition temperature of ferritic steels
铁素体钢的无塑性转变温度落锤试验方法
Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes
铁素体钢、奥氏体钢和不锈钢钢管的一般要求规范
Standard Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service
一般设备用无缝和焊接铁素体与马氏体不锈钢管
Texture evolution of a IF steel during ferritic rolling and direct annealing
IF钢铁素体区热轧和退火过程中织构的演变
Development and Investigation of Ferritic Heat Resistant Steels for Boiler Tube of the Advanced Power Plants
超高临界压发电厂锅炉管用铁素体耐热钢的发展现状与研究前景
Standard Specification for Electric-Resistance-Welded Ferritic Alloy-Steel Boiler and Superheater Tubes
锅炉和过热器用电阻焊铁素体合金钢管
Standard Specification for General Requirements for Carbon, Ferritic Alloy, and Austenitic Alloy Steel Tubes
碳素钢管、铁素体合金钢管及奥氏体合金钢管
Standard Specification for Free-Machining Ferritic Stainless Soft Magnetic Alloy Bar for Relay Applications
继电器用易切削铁素体不锈软磁合金技术规范
Specification for Free-Machining Ferritic Stainless Soft Magnetic Alloys for Relay Applications
继电器用易切铁素体不锈软磁合金规范
