formability
美 [fɔrmə'bɪlɪtɪ] 
英 [fɔ:mə'bɪlɪtɪ]
- n.成型性；可模锻(塑)性；加工成形性；可加工性
- 网络可成形性；成形性能；成型性能
英汉解释
例句
Every group evenly mixed and able to replace elm wood powder, so it has better formability and smoother surface.
各组分之间均匀粘合在一起，取代粘木粉，具有良好的成型性能和表面光洁；
Disclosed is a wrought magnesium alloy having excellent strength and extrusion or rolling formability, and a method of producing the same.
公开了一种具有优秀强度和挤压或轧制成形性的变形镁合金，以及该变形镁合金的制造方法。
Our product's high strength, excellent weldability, formability, and corrosion resistance meets manufacturing and commercial requirements.
美铝产品的高强度性、极好的可焊性、成形性和抗腐蚀性能满足制造和商业的需求。
De formability of the composites was maintained and the heat-durability was improved.
并使该复合材料在保持加工性能的同时耐热性能也得到提高。
Aluminum sunroof rails with good formability and dimensional stability, high rate of recovery, thus reducing the production costs.
铝合金天窗导轨具有良好的成型性和尺寸稳定性，回收利用率高，从而降低生产成本。
The formability can be increased by altering the forming strain path in the dangerous position and adjusting the lurking fracture site.
改变危险点的应变路径，调节失效破裂的位置，可有效地提高拼焊板方盒件的冲压成形性。
One of the major methods improving the formability of HSS is the variable blank-holder force.
变压边力是改善其成形性能的有效途径。
It shows that the formability of steel sheet for home electrical appliances made by Shougang is quite well.
结果表明，该家电板具有良好的力学性能和成形性能。
The formability would be influenced with the reduction of the cooling rate.
但随着冷却速度下降，易产生流淌，影响成形性。
Thirdly, plastic strain ratio and strain hardening index are the two key parameters of material's formability.
塑性应变比与应变硬化指数是评价板料成形性能的两个重要参数。
The numerical simulation results indicate that the variable blank-holder force can improve the formability of box deep drawing process.
研究表明，采用变压边力控制技术可以显著改善矩形盒的成形性能。
The electrode formability, uniformity of plate were investigated, the electric performance was analyzed by experimental cell.
考察了极板的成形性、均匀性，并采用实验电池进行电性能分析。
And adjusting the rolling process and selecting rolling ways to enhance magnesium alloy rolled formability are mainly demonstrated.
重点阐述了通过调整轧制工艺和选择轧制方式提高镁合金的轧制成形性。
It has been experimentally indicated that moderate wrinkling will make a contribution to enhancing the formability of tube hydroforming.
实验结果表明，适度的起皱有助于提高薄壁管内高压成形的成形极限。
The formability of aluminum alloy at room temperature is very low, which can be improved significantly by high velocity forming process.
铝合金板材室温下的成形性较差，但在高速变形条件下成形极限大幅提高。
These composite materials have superiorities in size stability, formability, stretching resistance and impact resistance.
这种复合材料在尺寸稳定性、成型性、抗张力和抗冲击方面均具优势。
Therefore, thin strip casting technique has advantage on improving the formability of ferritic stainless steel.
因此，薄带连铸技术在改善铁素体不锈钢的成形性能方面具有显著优势。
To achieve the formability properties for direct forming, soluble nitrogen is fixed as AlN by coiling the strip at higher temperatures.
为获得用于直接成型的成型性能，在高温下将钢条盘成螺旋形，填充可溶性氮作为氮化铝。
Formability is good, but contraction and directional general than amino plastics big, and contains water volatiles.
成型性较好，但收缩及方向性一般比氨基塑料大，并含有水分挥发物。
When the thickness of tube increase, the formability of the tube is better too, but the internal pressure for tube hydroforming is higher.
随着管材厚度的增加，管材的成形性能也会越好，但所需的成形压力也越高。
The varieties of the tensile formability of sheet metal has been compared and studied via standard uniaxial tensile test.
通过标准单向拉伸试验，对比研究了板材减薄前后单向拉伸性能的变化。
Heating device for rollers was installed by the reason of Mg alloys had low formability at room temperature.
针对镁合金室温塑性成形性差的原因，在设备上安装了轧辊加热装置。
Therefore, the final sheets with low temperature finish rolling displayed an enhanced formability.
因此，低温精轧能够显著提高冷轧退火板的成形性能。
Fully processed cold rolled sheets from these hot strips at customer send have shown good formability properties.
从这些热条钢完全加工而成的冷轧板，客户反馈说有很好的成型性能。
When work-hardening exponent of tube material get bigger, the formability of the tube is better.
管坯材料的加工硬化指数越大，材料的成形性能越好。
value is an important index to the formability of deep-drawing sheet steel.
值是评价深冲钢板成型性能的重要指标之一。
Select blank reasonably can mainly improve sheet formability, make full use of original material and reduce the amount of subsequent work.
合理地选择冲压件的毛料外形，可以提高板料的可成性，同时也可以提高材料利用率。
The measures for eliminating weld porosity and improving the bead formability are given.
提出铝合金电子束穿透焊中出现的气孔和焊缝成形不良等问题的防止措施。
Secondly, the friction factor has great influence on panel's stamping formability.
摩擦系数对覆盖件成形性能有重要影响。
In this paper, the formability of cold rolled steels after laser welding were analyzed.
在本研究中，对汽车用冷轧钢板在激光焊接后成形性能进行了细致的分析。
that the size and shape of TWBs have significant influence on the fracture site and the formability.
板料毛坯形状和尺寸对失效破裂的位置和成形性能影响显著。
Previous resolutions on the formability of tailored-welded blanks are mostly stayed in linear-weld-line TWBs.
以往关于拼焊板成形性的研究大多停留于直线焊缝拼焊板。
Base on these, done a further research on formability affected by different open distance in Run-out Drawbead.
在此基础上，进一步研究了半开放式拉延筋不同的开放宽度对于板料成形质量的影响。
AZ31 magnesium alloy sheet with good shape and formability is fabricated by warm cross rolling.
通过温热交叉轧制工艺制备了板形以及成形性能良好的AZ31镁合金薄板；
Finally, equiaxed structure of cast strip was in favor of formability and ridging resistance.
铸轧薄带的等轴晶组织比柱状晶组织有利于提高冷轧退火带的成形和抗皱性能。
The squeezed-casting formability of AZ91D magnesium alloy in semi-solid state was studied.
研究了AZ91D镁合金在不同半固态温度下的挤压铸造。
If you need the formability of determination of iron powder, can press GB11106.
如需测定铁粉的成形性时，可按GB11106进行。
The forth part is about the prediction of the formability of suitings.
第四部分是有关西服面料成形性的预测研究。
Forming limit is the most important formability index and process parameter in sheet metal forming.
成形极限是板材成形领域中重要的性能指标和工艺参数。
the elastic cushion with reasonable thickness improves the formability of AZ31B sheet, which can make four indicator values reach minimum.
合理厚度的弹性垫能够提高AZ31B薄板的成形性能，使上述四项指标的波动达到最小。
