multiaxial

multiaxial

美 　英

• 网络多轴；多轴型生长模式；多轴向补强材

例句

A multiaxial fatigue life prediction model was built by means of the proposed multiaxial fatigue damage parameter.

根据该参量，本文建立了多轴疲劳寿命预测模型。

Biaxial analysis was used to get the multiaxial information, and fatigue calculation of multiaxial crack initiation was conducted.

寿命预测采用多轴裂纹萌生疲劳分析，其中部件的多轴特性通过二轴分析获得。

The proposed model reveals the anisotropic multiaxial damage characteristics of concrete effectively.

本模型可有效地表达出混凝土的各向异性和多轴损伤特点。

Experimental study on multiaxial characteristic of air-entraining concrete after freeze-thaw cycling is just in the initial stages.

冻融条件下引气混凝土的多轴力学性能研究，目前尚处于初步阶段。

The theoretical and practical significance of modeling error and controlling error in multiaxial servo systems was pointed out.

指出了多轴加工中轮廓误差建模和误差控制方法的理论意义和应用价值。

A method is outlined for making low cycle fatigue life prediction for engineering components subject to multiaxial loading.

介绍了一种预测受多轴交变载荷工程构件的低周疲劳寿命的方法。

The characteristics of strains on the maximum shear plane were analyzed under tension-torsion multiaxial fatigue loading.

针对拉扭多轴疲劳加载情况，分析最大剪切平面上的应变特性。

The strength and rigidity of soft rock are improved under multiaxial condition compared with those under uniaxial condition.

与单轴试验相比，在多轴条件下，软岩（尤其是遇水软化的砾岩）的强度和刚度均有所提高。

The application examples of biaxial are multiaxial reinforcement structures and discussed in detail.

详细讨论了双轴向和多轴向加固经编织物的具体应用实例。

Many criteria and approaches are developed since multiaxial fatigue was studied on high-cycle fatigue and low-cycle fatigue.

多轴疲劳自研究以来，对于高周疲劳和低周疲劳分别出现了许多方法和准则。

The fatigue life is calculated with local stress and strain method under multiaxial condition.

采用多轴应变下的局部应力应变方法进行疲劳寿命计算；

Three, can the multiaxial linkage and has good deep hole cavity cutting ability of comprehensive.

能多轴联动并具有良好的深孔腔综合切削能力。

We provide multiaxial servo controlled system robot.

提供多轴伺服控制的机械手和机器人。

The authors present a novel technique of atlantoaxial fixation using multiaxial C-1 posterior arch screws.

作者描述了使用多轴C-1后弓螺钉固定寰枢椎这一较新颖的技术。

Failure modes of concrete under multiaxial loading.

混凝土在多轴受力时的破坏形式。

The developments of multiaxial fabrics in the world are introduced.

介绍了多轴向技术在世界各国发展状况。

Finally, the future directions in the research of multiaxial low cycle fatigue are suggested.

并建议今后多轴低周疲劳课题的研究方向。

A new proportional factor was introduce into the model in order to consider the effect of loading path shape on the multiaxial ratcheting.

定义了一个新的非比例因子，讨论了非比例加载路径对棘轮行为的影响。

On the Validation of Rafting Law and Creep Life of Nickel-base Single Crystal Superalloys under Multiaxial Stress States

镍基单晶合金筏化规律及蠕变持久寿命模型在复杂应力状态下的考核

Experimental method for multiaxial strength and deformation characteristics of concrete

混凝土多轴强度与变形特性的试验方法

Study of Multiaxial Low - cyclic Fatigue Prediction Methods

多轴低周寿命预测方法研究

Elastoplastic Finite Element Analysis of Smoothing Specimen Under Multiaxial Cycle Loading

光滑薄壁管件的多轴循环弹塑性有限元分析

Knitted Multiaxial Multi-Ply Fabrics-State of the Art and Prospects

针织多轴向多层织物--技术水平及发展前景

Experimental Research on the Multiaxial Fatigue Behavior of Fibre Reinforced Composites

纤维增强复合材料多轴疲劳的实验研究

Time-Dependent Cyclic Behavior of Stainless Steel under Multiaxial Loading at Room Temperature

室温下不锈钢的多轴时相关循环变形行为

The Application of Artificial Neural Networks in Prediction of Multiaxial Strength of Concrete

神经网络在混凝土多轴强度预测中的应用

FEM creep damage study for nickel-base single crystal structure under multiaxial stress conditions

镍基单晶结构的蠕变损伤寿命研究

Testing method for multiaxial impact behaviour of carbon fibre reinforced plastics

碳纤维增强塑料的多轴向冲击特性的试验方法

A multiaxial Low Cycle Fatigue Damage Parameter for Single Crystal Nickel-Based Superalloys

一种镍基单晶合金多轴低周疲劳损伤参量

Research on An ISA-Bus-Based Multiaxial Servo Control System

一种基于ISA总线的多轴伺服控制系统的研究

Estimation of Brittle Materials'Strength Under Multiaxial Stress State

多轴应力状态下脆性材料强度的估算

Study on Strength Criterion of Concrete under Multiaxial Stresses and Continuous Load

混凝土单调加载下多轴强度准则研究

Multiaxial Low Cyclic Fatigue Damage Model for Single Crystal Nickel-Based Superalloy

复杂应力状态镍基单晶合金低周疲劳损伤模型

Approximate Calculation of Local Stress and Strain under Multiaxial Stress State

多轴应力状态下的局部应力应变近似计算方法及其应用

Visco-Plastic Constitutive Modeling for Multiaxial Ratcheting of 304 Stainless Steel at High Temperatures

304不锈钢高温多轴非比例循环棘轮行为的粘塑性本构描述

Multiaxial Fatigue Damage Parameter for Fibre-Reinforced Composites Based on a Critical Plane Approach

基于临界平面法的复合材料多轴疲劳损伤参量研究

Fatigue Life Prediction Under Multiaxial Loading

多轴疲劳寿命预测及验证

Control System of Multiaxial Fatigue Electro-hydraulic Servo Testing Machine

电液伺服多轴疲劳实验机控制系统

Multiaxial fatigue life prediction of fan disk using critical plane method

多轴疲劳理论在航空发动机零部件寿命预测中的应用

Fracture Strength of Ceramics under Multiaxial Stress State

复杂应力作用下结构陶瓷材料的断裂强度