nanoindentation
美 
英
例句
Nanoindentation technique is a technique that determines the mechanical properties of a material in the sub-micro scale.
纳米压痕技术是在亚微米尺度下决定一种材料机械属性的测试方法。
The quasi-continuum method was used to simulate the processes of early stages deformation in FCC Al nanoindentation.
采用准连续介质方法模拟面心立方（FCC）铝单晶薄膜在纳米压痕下产生的变形过程。
This review mainly discussed the principle of nanoindentation and its current applications in wood science field.
文中对纳米压痕技术的测试原理及其在木材科学中的应用现状进行了较为详细的论述。
Increasing the holding time in nanoindentation induces creep deformation, including transient stage creep and steady stage creep.
增加纳米压痕保载时间导致蠕变变形，该蠕变变形存在瞬态蠕变和稳态蠕变两个阶段。
Based on the dislocation theory, the influence of the indenter size on the measurement results of nanoindentation tests was analyzed.
从位错理论的角度分析了压头尺寸对纳米压痕测试结果的影响。
It is difficulty to calculate subentry of uncertainty in nanoindentation because there are many factors.
纳米压痕试验中对测试结果产生影响的因素很多，如果计算各个分项相当困难。
It will be a significant topic for the development of nanoindentation tests to find solutions to these problems.
寻找解决这些问题的方法，是纳米压痕试验未来发展中的重要课题。
The development progress of nanoindentation test in recent years is stated.
阐述了纳米压入测试技术的发展历程；
Mechanical properties of polysilicon microcantilever beams measured using nanoindentation
纳米硬度计研究多晶硅微悬臂梁力学特性
Classification and Evaluation of Influence Factors for Measuring Uncertainty of Property of Micromechanics of Materials by Nanoindentation
纳米压入法微机械材料力学性能测量不确定度的影响因素分类及评价
Measurement of Material Mechanical Properties Using Nanoindentation and Finite Element Simulation
基于纳米压痕技术和有限元仿真的材料力学性能分析
Progress in Nanoindentation Hardness Calculation and Measurement Methods Research
纳米压痕硬度计测方法的研究进展
Micromechanical Properties Estimation of Composite Coating Consisting of Cerium and Titanium Using Nanoindentation Technique
用纳米压痕法研究玻璃表面复合薄膜的力学性能
Analysis of Nucleation of Dislocation in Nanoindentation by Variational Boundary Integral Method
用边界元法分析纳米硬度实验中的位错生成
Changes and Correction of Nanoindentation Hardness of Thin Solid Films Measured in Residual Compressive Stress Field
残余压应力场中薄膜纳米测量硬度的变化与校正
The Measurement of Residual Stress in Electrodeposited Nickel Coating by Nanoindentation
纳米压痕法测量电沉积镍镀层的残余应力
Young's Modulus of Polysilicon Microcantilever Beams by Deflection Using Nanoindentation
纳米硬度计研究多晶硅微悬臂梁的弹性模量
Elastic Modulus and Hardness of Ganoderma Lucidum Spore Studied by in Situ Nanoindentation Technique
原位纳米测试技术研究灵芝孢子孢壁弹性模量和硬度
Effect of Curve Fitting Methods on the Measuring Results of Mechanical Properties Using Nanoindentation
曲线拟合方法对压入法材料力学性能测量结果的影响
Mechanisms of polycrystalline Cu thin films during nanoindentation creep
多晶铜膜纳米压入蠕变性能
Nanoindentation applying to mechanical measurement for MEMS
纳米硬度计在MEMS力学检测中的应用
Mechanical Properties of Composite Coating Consisting of Cerium and Titanium by Nanoindentation and Nanoscratch
纳米压痕和划痕法对含氧化铈薄膜机械性能的测定
Adhesive Force on Nanoindentation Between Tip of Atomic Force Microscopy and Sample Surface
原子力显微镜针尖同接触面的纳米压痕粘着力
Factors Influencing Nanoindentation Test Data
影响纳米压入测试结果的因素
Morphological characterization and nanoindentation hardness scatter evaluation for Cu-W thin films based on wavelet transform
基于小波变换Cu-W薄膜表面形貌表征与硬度值分散性评价
Application of Nanoindentation Technique in Wood Science
纳米压痕技术在木材科学中的应用
Mechanistic Study on Nanoindentation Creep in Single Crystals
纳米压痕蠕变机理研究
Atomic Scale Simulations of Nanoindentation
原子尺度的纳米压痕模拟技术
Young's Modulus Determination of Soft Metal Thin Films by Nanoindentation Technique Based on the Constant Modulus Assumption Analysis
基于等模量假设的软金属薄膜本征模量的纳米压入评定
Study on judging the initial contact point in nanoindentation
纳米压入法测量中初始接触点判断问题研究
Nanoindentation of microarc oxidation coatings on pure titanium
纯钛表面微弧氧化膜纳米压入法研究
Effect of hydrogen-induced martensite on nanoindentation creep of 316 type stainless steel
氢致马氏体对316不锈钢的纳米压痕蠕变的影响
Use of nanoindentation for the study of the local properties gradient material
利用切口对材料梯度局部特性进行研究
