nibco
美 
英
例句
As a standard NIBCO bronze fire protection valves are made to be " Dezincification Resistant, " which is a seal of quality and longevity.
作为一种基本要求，美国尼伯科青铜消防阀门都具有“抗失锌”特性，质量更加优异，使用寿命更加长。
Optimum ductility is obtained with a ferritic matrix, so all NIBCO ductile iron is treated with a ferritizing annealing cycle.
由于最佳的韧性都是来自铁素基体，所以所有美国尼伯科球墨铸铁都经过铁素体退火韧化过程处理。
The NIBCO valve figure numBEr and size must also BE furnished and specify valve stem coupling for use with floor stand.
另外还要提供尼伯科阀门型号和尺寸，并说明所要采用的阀门阀杆与地轴架的连接装置。
NIBCO uses short strand fiberglass as a reinforcement for our higher pressure carbon steel and alloy ball valve products.
在美国尼伯科较高压力的碳钢和合金球阀产品中，采用短束玻璃纤维作为强化材料。
with reversible motors that are rated for continuous duty , nibco electric actuators provide maximum torque output and longer life.
配置可逆电机，适用于连续工作，美国尼伯科电动执行机构能够提供最大的扭矩输出和更长的使用寿命。
specify either the sprocket and chain numBEr or the NIBCO valve figure numBEr and size. The chain length must also BE specified.
订购时，既要指明链轮型号，也要指明链条型号，或者美国尼伯科公司阀门的型号和尺寸。链条的长度也要指明。
Barbed Insert Fittings for Polybutylene (PB) - NIBCO offers a complete line of copper barbed insert fittings for joining PB tube.
用于聚丁烯（PB）的倒钩插入式管件-美国尼伯科公司提供完整系列的铜倒钩插入式管件，用于连接聚丁烯管道。
It has been assigned to NIBCO by the Defense Logistics Service Center, Battle Creek, Michigan.
由位于美国密歇根州的美国国防部后勤服务中心授予美国尼伯科公司。
NIBCO Iron Body Check Valves may be installed in both horizontal and vertical lines with upward flow or in any intermediate position .
双阀瓣止回阀可以安装在水平位置，或流向朝上的垂直位置。
NIBCO flanged ball valves provide precision, performance and value for industrial flow control applications.
美国尼伯科法兰球阀提供精确地、高性价比的工业流体控制应用方案。
NIBCO's new Circuit Balancing Valves control and maintain a comfortable indoor climate while saving energy and reducing costs.
在节约能源和降低成本的同时，美国尼伯科的流量平衡阀控制调节和维持一个舒适的室内环境。
NIBCO valves are packaged in a manner for convenient handling, shipping and stock-keeping.
尼伯科公司的阀门在包装上是以便于装卸、运输和储存为原则。
For individual sizing of actuators to ball valves consult your NIBCO technical service representative.
对于应用在球阀上的执行机构的个别尺寸，请咨询您的尼伯科技术服务代表。
NIBCO is the largest United States manufacturer of pressure rated Ductile Iron Valves.
美国尼伯科是美国最大的额定压力球墨铸铁阀门制造商。
Standard NIBCO iron valves are furnished with Synthetic Fibres and Graphite packing along with Synthetic Fibre gaskets.
标准尼伯科铸铁阀门与合成纤维密封垫一起配备合成纤维和石墨填料。
NIBCO Ductile Iron Valves are an excellent, readily available alternative for cast steel valves.
美国尼伯科公司的球墨铸铁阀门是优秀的产品，确实是铸钢阀门有价值的替代品。
Distortion tests show that NIBCO block valves resist the distortive forces which result from such abuse.
变形试验表明美国尼伯科关闭阀能够经受住上述滥用所产生的变形力。
NIBCO ductile iron products are examined at each step of their manufacture to assure quality.
美国尼伯科公司的球墨铸铁产品在制造过程中的每个阶段都经过严格的检验，其质量有保证。
Note: See NIBCO's "Chemical Resistance Guide Catalog" for specific questions.
注意：具体问题请参阅美国尼伯科的“耐化学腐蚀性指南”。
Graphite Packing and Gaskets optional on some NIBCO Iron Valves. Consult factory.
在一些美国尼伯科铸铁阀门上可选择石墨填料和垫圈。请咨询工厂。
Steam-Water, Oil, and Gas. Standard on all NIBCO Iron Body Valves unless otherwise specified.
蒸汽，水，油和气。所有美国尼伯科铸铁阀体阀门的标准配置，除了特别指定以外。
All NIBCO pressure-rated bronze gate, globe, check and bronze ball valves are manufactured in NIBCO's Nacogdoches, Texas, plant.
所有美国尼伯科额定压力青铜闸阀、截止阀、止回阀和青铜球阀都是在美国德克萨斯州的尼伯科工厂制造。
Flared Joint - The principle of the flared joint was first developed for copper tube plumbing in 1928 by NIBCO.
扩口连接-扩口连接的原理是由美国尼伯科公司在1928年首先为铜管管件发明的。
NIBCO INC. Reserves the right to change materials, options and accessories without notice.
美国尼伯科公司保留在没有另行通知的情况下，改变材料、选配件和附件的权利。
NIBCO flow-control solutions are everywhere you look, including on our website.
美国尼伯科流体控制解决方案在我们的网站上可以找到。
The "New Products" page is a continuously updated showcase for new products by NIBCO.
“新产品”网页不断更新，展示美国尼伯科新开发的产品。
NIBCO provides vented balls as standard on all carbon and stainless steel ball valves and bronze T-560s with stainless steel balls.
对于美国尼伯科的所有碳钢球阀和不锈钢球阀和T-560系列青铜球阀，不锈钢通风球都是作为标准配置。
When ordering, specify the sprocket number, Chain number and length, or the NIBCO valve figure number, size and the Chain length.
订购时，请指明链轮型号，链条型号和长度，或美国尼伯科阀门的型号、尺寸和链条长度。
NIBCO will review the request and advise if request can be met.
美国尼伯科将审查开孔要求，如果要求能够满足，将加以指导。
All NIBCO iron valves are available with tapping for drain and special tapping.
所有美国尼伯科阀门都可以进行开孔，用于排泄和特种攻丝。
All NIBCO Ductile Iron Valves are tested to MSS requirements in our ISO 9002 quality certified manufacturing plant in Blytheville, Arkansas.
所有美国尼伯科阀门都在我们位于美国阿肯色州的、符合ISO9002质量认证的制造厂内按照MSS要求进行测试。
Applicable to NIBCO INC. Plumbing and Heating Valves only .
仅适用于美国尼伯科管道与供暖阀门。
Ductile iron regularly produced by NIBCO has a tensile strength in excess of 60, 000 pounds. Yield strength is in excess of 40, 000 pounds.
通常由美国尼伯科生产的球墨铸铁的抗拉强度都超过60,000磅，屈服强度超过40,000磅。
NIBCO Puts You In Control. . .
美国尼伯科让您处于控制之下……
NIBCO Pneumatic Actuators Features and Benefits
美国尼伯科气动执行机构特征与优点
The following valves are offered as oxygen cleaned and bagged. NIBCO figure number
下列阀门可进行氧气清洗和包装。美国尼伯科型号
Why Engineers Specify NIBCO Bronze Ball Valves:
选型工程师喜欢选择美国尼伯科青铜球阀的理由：
