servo-system
美 
英
英汉解释
例句
When the speed servo system has a large torque reference, the output of its PI controller is often saturated.
当速度伺服系统的转矩参考值很大，转矩PI调节器的输出就容易饱和。
This paper presented mathematical modeling and simulation of an electro hydraulic servo system by means of a nonlinear analysis method.
运用非线性分析方法对一试验用电液伺服系统进行理论建模和仿真研究。
The result validates that this position control system using as the precision machine feed drive servo servo system is feasible.
实验结果初步验证了该位置伺服控制系统在精密加工机床上应用的可行性。
With the rapid advancement of computer technology, AC motor servo system had replaced DC motor servo gradually and been used widely.
随着计算机技术、交流电机调速理论的发展，交流伺服系统逐渐取代直流伺服成为现代伺服系统应用的主流。
Testing results of the servo system developed show that the system is of high accuracy and excellent super low speed stability.
系统实测结果表明，可实现优越的精度和稳定的超低速运行特性。
The design and implementation of a signal processing circuit for the optical encoder used in digital servo system were introduced.
介绍了应用于数字化交流伺服系统的光电编码器信号处理电路的设计与实现。
The hardware part of the servo system is designed, and a mathematical model is established in accordance with the principle of control.
设计了伺服系统的硬件部分，根据系统的控制原理建立了数学模型，并进行计算机数字仿真，分析了系统的稳定性。
One of the trends on modern electronic drive control is developing new type alternating current (AC) speed regulation and servo system.
现代电气传动控制的发展趋势之一是开发新的交流调速与伺服系统。
Identification experiment shows that it has great practical meaning for inertia identification for two-mass servo system.
辨识实验表明：该方法对柔性伺服系统负载惯量的在线辨识具有较大的实用意义。
High-performance nonlinear tracking control problem for a hydraulic servo-system with parametric uncertainties is considered.
针对存在不确定参数的液压伺服系统，提出了高性能轨迹跟踪控制器的设计方法。
The latter method can be applied to the fuzzy control of the quadruped robot's servo system and has a good effect.
采用第二种方法，应用于四足步行机器人伺服系统的模糊控制，效果良好。
The simulation result of servo system demonstrates its effectiveness.
伺服系统的仿真结果说明了该算法的有效性。
It has been concluded that the method is resonable, reliable and can be satisfied with the requirements of high-performance AC servo system.
该方案的工作可靠，检测精度较高，完全能够满足数控机床用高性能交流伺服系统的需要。
The test equipment is currently used in testing the certain radar's servo system and got a satisfactory result.
该设计目前已应用于该型雷达的伺服控制系统测试中，并取得了满意的测试效果。
It was proved by the research that the AC servo system adopted by the disturbance observer can provide strong robustness.
研究表明采用干扰观测器的交流伺服系统具有较强的鲁棒性。
The cutting system stability is simulated and relation curves between the limited cutting width and servo system parameters . . .
仿真和实验结果表明，数控机床伺服参数与极限切削宽度具有映射关系，文中所述方法实用、可靠。
The accuracy of the NC machine was restored. A reforming project of the typical parts of the servo-system is given.
对改造后的车床精度进行了恢复，并给出伺服系统典型部件改造方案。
These optically-generated signals provide higher accuracy and reliability, improving the performance and reliability of the servo system.
这些光产生的信号提供更高的精度和可靠性，提高性能和伺服系统的可靠性。
In DVD focus servo system, the warp of the disc induces periodic disturbance whose frequency is same as the rotation frequency of the disc.
在DVD聚焦伺服系统中，光盘翘曲会导致产生与光盘转动频率相同的周期性扰动。
And the servo-system is one of the key parts affecting its following and aiming precision.
而随动系统是其能否实时跟踪和瞄准目标的关键部件之一。
In recent years, electro-hydraulic servo system has widely been applied to aviation, spaceflight, shipping and metallurgy fields etc.
目前，电液伺服系统已被广泛地应用于航空航天、船舶、冶金等重要领域。
The series of reducer are widely used for power lock , medical Appliances , camera, toy, the servo system, precision instruments and so on .
减速器系列广泛应用于电动门锁、医疗器械、照相机、玩具、伺服系统、精密器械等。
Finally, a mathematic model for a typical mechanical position servo system with friction model by LS-SVM is established.
最后，以典型机电位置伺服系统为研究对象，建立基于LS-SVM摩擦补偿的机电伺服系统模型。
The application of the linear Hall element to position or angular displacement measurement for the servo system is proposed.
提出了将线性霍尔器件用于伺服系统的位置或角位移检测的方法。
In view of a specific X-Y numerical-control work table, the servo system mathematical model is established considering frictional influence.
针对一个具体的X-Y数控精密工作台，建立了一种考虑摩擦影响的进给伺服系统数学模型。
Implementation of Embedded DSP-based precision tracking servo system to achieve the fine tracking servo system of light miniaturization.
基于DSP实现嵌入式精跟踪伺服系统，实现了精跟踪伺服系统的轻小型化。
established servo system's mathematical model and analyzed its stability performance, stable performance and dynamic performance.
通过剖析法，建立起伺服系统的数学模型，并对其稳定性能、稳态性能和动态性能进行了研究。
The results show that the DDVC electro-hydraulic servo system applied to civil engineering structure vibration active control is feasible.
结果表明，将直驱式电液伺服系统应用于土木工程结构振动主动控制上是可行的。
The stepping position servo system has extensive application foreground in research and experimentation of numerical control system.
该系统在对数控系统的研究开发和实验教学中具有广泛的应用前景。
By using the theory of back stepping, the servo system had strong robustness to the external disturbance and the system parameter changes.
采用反推原理进行设计，系统对外部扰动及系统参数变化具有较强的鲁棒性。
The main content of this paper is to research and design all-digital AC servo system.
本文的主要内容就是研究和设计全数字化的永磁交流伺服系统。
servo system plays an important role in defense construction , industrial production , transport and communication even family life.
伺服系统在国防建设、工业生产、交通运输甚至家庭生活中都有重要的地位。
This paper studies the fundamental characteristics and the control method of the pneumatic proportional position servo system.
本文对气动比例伺服控制系统的基本特性和控制系统方法进行了研究。
A high performance digital servo system is developed according to demand of the item, and long-distance control of it is realized.
本文根据项目要求研制了一套高性能数字伺服系统，并实现了其远程控制。
This paper presents an application of model reference fuzzy adaptive PID control to the submarine propeller hydraulic servo system.
本文主要介绍了模型参考模糊自适应PID控制在潜艇推进液压伺服系统中的应用。
Then, the application of PID control, optimal control and pole assignment method in the electro-hydraulic servo system are all developed.
然后，作者研究了PID控制、最优控制和极点配置方法在所设计的电液位置伺服系统中的应用。
Carefully selected control servo system, high precision leveling section, finished flat, smooth incision.
精心选用伺服系统控制，整平切片精度高，成品平整，切口光滑。
This research is available for realizing high accuracy hydraulic servo system "s position control by adopting the linear control theory. "
该研究对采用线性控制理论实现液压伺服系统的高精度位置跟踪控制有一定的帮助。
However, with the increasing of control quality request, the status of electro-hydraulic servo system PID control fluctuates.
然而，随着人们对控制品质要求的不断提高，电液伺服系统中PID控制的地位发生了动摇。
Servo system is the numerical control information into machine into the enforcement agencies to movement.
伺服系统是把数控信息转化为机床进给运动的执行机构。
