solidification
美 [səˌlɪdɪfɪ'keɪʃ(ə)n] 
英 [səˌlɪdɪfɪ'keɪʃ(ə)n]
- n.凝固；团结；【化】固体化(作用)
- 网络固化；固化作用；硬化
英汉解释
例句
Mexican middle of a blue water as if with solidification in the bottom.
中间一条墨蓝的水带仿佛凝固在池底。
Even at large undercooling, nucleation during solidification is usually controlled by a heterogeneous process.
即使是在大冷，核凝固过程通常是由一个非均质过程。
Easy crystallization and easy to solidification of the medium and high viscosity should be used in the structure of large rotary spring.
易结晶、易凝固和高粘度的介质，应采用大弹簧旋转式结构。
Cheerful noisy scenes have gone like the wind, surrounded by silent silence, space-time like a general solidification.
欢乐嘈杂的场面好像随风飘去，周围是鸦雀无声的沉寂，时空好像凝固一般。
Directional solidification process is an important part that of the physical metallurgy of solar energy polysilicon.
定向凝固工艺是物理冶金法制备太阳能级多晶硅的一个重要环节。
Autumn light! It was a quiet day together rich, crystal jade run. Is the moment of calm calm after solidification.
秋光么！那是一个个素淡的日子叠加起来的殷实，晶莹玉润。是沧海桑田瞬间凝固后的平静淡定。
The surface of solidification sample was smooth, and the pores were the less and smaller after put the refinement into the alloy.
在经精炼剂除气后，凝固试样表面光滑，气孔少而且尺寸较小。
To cause to solidify or coagulate or to undergo a process likened to solidification or coagulation.
使凝结使固化或凝结或使经历类似于固化或凝结的过程
It is hopeful that the undercooling induced by a high magnetic field is big enough to make a whole solidification o. . .
利用强磁场有可能在材料中形成大的整体过冷，可实现材料的整体凝固。
The tundish temperature is one of the factors which seriously affect the solidification position of continuous casting slab.
中间包温度是影响连铸板坯凝固位置的重要因素之一。
Conventional planar flow casting(PFC)is one of rapid solidification processes for fabrication of microcrystalline or amorphous ribbons.
传统平面流铸技术是用于生产微晶或非晶合金薄带的一种快速凝固技术。
This distribution is helpful to understand refining effect of pulsed magnetic field on solidification microstructure.
这种分布特性有助于了解脉冲磁场对金属凝固组织的细化作用。
The mechanism of the heat flux changing is explained by the temperature fields and the solidification developing of the molten field.
通过熔池内温度场及温度梯度分析了熔池内凝固的发展及其对热流密度变化的影响。
Results A great deal erythrocytes with inequality electron density were atypically like concave disk in natural solidification group.
结果自然凝固组大量红细胞表现为非典型双凹圆盘状，电子密度不均；
Squeeze casting is a process which involves the solidification of a molten metal in a closed die under disposed high pressure.
模压铸造是在密闭的金属模环境里对熔融金属施加强高压使其凝固的一种工艺。
Dispersion strengthening through solidification processing is an innovative route compared with traditional powder metallurgy route.
通过铸造实现弥散强化是不同于传统粉末冶金弥散强化的新途径。
At this point, the whole of the same air as the solidification.
此时，整个空气像凝固了一样。
To understand the influence of minute film thickness on the volume changes after the solidification of zinc phosphate cement.
为了了解微小尺寸的成形空间对磷酸锌水门汀初凝后的厚度变化规律的影响。
Solvent near hair hot melts solute dissolved in a solvent, low volatile temperature solidification, and persisted at the time of matozoa.
溶剂近发型热熔胶中溶解了溶质的溶剂，挥发温度大大降低，至冷却固化时仍存留在胶体中。
Surplus sand that has not been embedded within the structure acts as a buttressing support while the solidification process takes place.
剩余砂尚未嵌入结构作为支撑的支持，而凝固过程发生。
The relationship between the laser processing parameters and laser directional solidification morphology was analyzed by the model.
根据计算分析了激光工艺参数与激光定向凝固组织的关系。
This paper articulates the properties of the compound wasteful mud solidified agent and its treatment technology of solidification.
笔者对复合废弃泥浆固化剂的性能及其固化处理工艺研究做了阐述。
Cyanoacrylates give off heat on solidification. In rare cases, a large drop will increase in temperature enough to cause a burn.
氰基丙烯酸酯粘合剂凝固时会散发热量，在较罕见情况下，大滴粘合剂滴落到皮肤上会导致高温烫伤。
Forth, resonance could promote the scouring of solidification interface by melts, which refined the grains across the cross-section.
结合试验分析共振能加速熔体对凝固界面的冲刷，进而细化整个截面的凝固组织。
The enthalpy model was used in calculating the solidification period of a new kind of phase change material in cool storage ball.
采用了焓法模型对一种新型的相变材料在球内的凝结过程进行了数值求解。
The finite differential method was applied to develop a simulation software for solidification temperature field in continuous casting.
采用有限差分方法，自行开发了连铸过程的凝固温度场模拟软件。
The results show that the optimum technology can ensure the progressive solidification of the castings and eliminate shrinkage and porosity.
结果表明，该优化工艺实现了铸件的顺序凝固，消除了缩孔、缩松。
In the light of the different forms of solidification, the adhesive can be classified as 4 types.
依据固化方式的差异将胶粘剂分为4种类型；
The main technological properties are linear expansivity, tensile strength, flowability and solidification time.
石膏型混合料主要的工艺性能有：线膨胀率、抗拉强度、流动性和胶凝时间。
The solidification happens when the quasi-citizens convert into citizens, it is the symbol of the form of ternary social structure.
农民市民化在准市民向市民转化这一阶段凝固下来，标志着三元社会结构的形成。
Our univer-city, splicing into containers, is no longer the simply solidification of concrete structures.
我们的大学，不再只是凝固的钢筋混凝土搭建的建筑；
By the new method, the formation of peritectic phases can be shown graphically throughout solidification.
借助于这种方法，在最终的模拟结果中可以显示包晶相的随机分布。
Steady thermal analysis based on solidification process is performed. based on which structural integrity of SRM is investigated.
进行了固体发动机固化降温均匀温度场的结构完整性分析。
Phase field method is one of the most powerful methods in the modeling of solidification.
相场法是凝固微观组织数值模拟的有效方法。
At present, phase-field model is a heated topic as an effect method in numerical simulation of solidification microstructure.
相场法作为一种模拟凝固微观组织的有效方法，是目前研究的热点。
The experiment results show that the melt superheating treatment has remarkable influence on the solidification microstructure.
实验结果表明，熔体超温处理对DZ125合金的定向凝固组织有着显著的影响。
During encapsulation process, used optical photosensitive adhesive rapid solidification method under UV irradiation.
封装过程中，采用光学光敏胶紫外光照射下快速凝固法。
Inclusion. Foreign material or non-metallic particles entrapped within the metal during solidification.
夹杂物。金属凝固过程中残留在其内部的杂质或非金属颗粒。
Solidification-heat was modeled by means of equivalent-specific heat method.
利用等效比热法处理了凝固过程中的结晶潜热；
The filling process, solidification process and air entrapment condition of the aluminum casting were shown by numerical simulation.
通过数值模拟的方法对该铸件的充型过程、凝固过程及铸件的气体卷入情况进行模拟。
