styrene
美 
英 ['staɪriːn]
英汉解释
英英解释
例句
Diphenylmagnesium bromide did not initiate styrene in dichloromethane and tetrahydrofuran either adding oxygen or not.
同时考察了溶剂是二氯甲烷和四氢呋喃时，无论加不加氧气，苯基溴化镁均不能引发苯乙烯聚合。
One judge said she had already dealt with a similar case when styrene spilled out of rail car near Cincinnati.
一位法官说，她之前处理过类似的案子，那次是苯乙烯从辛辛那堤市附近的一节火车车厢溢出来。
The invention relates to an isotactic polypropylene capped with a styrene group and a preparation method thereof.
本发明涉及一种以苯乙烯基团封端的等规聚丙烯及其制备方法。
Formed in 1966, the company specializes solely in manufacturing caskets and urns made out of high-impact styrene plastic.
赫伊宠物棺材公司创办于1966年，专门利用高冲压的苯乙烯塑料制造宠物棺材和骨灰盒。
Systematicstudy was made of the factors influencing tensile property for styrene-acrylic(SA) emulsion-cement compounded waterproof coating.
本文就影响苯丙乳液-水泥复合防水涂料拉伸性能的诸多因素进行了系统的研究。
Textile glass chopped-strand mats for reinforcement of plastics. Determination of time of dissolution of the binder in styrene.
纺织玻璃纤维.增强塑料用的短丝玻璃纤维.粘合剂吞苯乙烯中溶解时间的测定
A stable and soluble copolymer was obtained by the solution copolymerization reaction between the titanium-containing monomer and styrene.
通过该含钛单体与苯乙烯的溶液共聚反应得到了稳定性高且可溶的共聚物。
Raw materials for the rubber industry. Carbon black. Evaluation of the quality of the carbon black in a styrene-butadiene based mixture.
橡胶工业原料.炭黑.丁二烯苯乙烯橡胶混合物中炭黑质量的评定
MBS resin was synthesized by means of the grafting of styrene and MMA monomers on SBR in bulk polymerization.
采用本体聚合方法将苯乙烯、甲基丙烯酸甲酯与丁苯嵌段共聚物接枝合成MBS树脂。
Composites between graphite and polystyrene have been synthesized starting from potassium intercalated graphite and styrene vapor.
石墨和聚苯乙烯之间的合成物已经被综合被使添加石墨和苯乙烯蒸汽的来自钾的出发。
Heat of the main construction material sealant mainly isobutene polymer, EPDM rubber and thermoplastic styrene block copolymer.
热施工密封胶的主体材料主要是异丁烯类聚合物、三元乙丙橡胶和热塑性的苯乙烯嵌段共聚物。
All joints telescoped and based removable insulation made of molded expandable poly-styrene.
所有联接挤撞了和根据了可移动的绝缘材料由被铸造的可伸缩的多苯乙烯制成。
Incorporation of the prepared nano-particles into the styrene acrylic emulsion coatings will improve the coatings performance greatly.
将制备的纳米粒子加到苯丙涂料中，可使涂料的各项性能得到很大提高。
Styrene-acrylic latex modified cement mortar for repair was prepared using compound technology and its properties were studied.
采用复配技术制备苯丙乳液改性水泥修补砂浆，并进行性能研究。
Chemical Process Equipment: Phosphoric acid, nitric-sulfuric acids, sulfuric acid, calcium chloride and magnesium chloride, styrene.
化工设备：磷酸，硝硫混酸，硫酸，氯化钙氯化镁溶液和苯乙烯；
Aging of polystyrene and styrene-acrylate copolymers had been quantitatively investigated with UV-Vis and FITR spectroscopy.
用紫外-可见光谱法与付里叶变换红外光谱法研究聚苯乙烯以及苯乙烯-丙烯酸酯共聚物的老化过程。
jointly develop commercial applications for solution polymerization styrene butadiene rubber.
溶液聚合丁苯橡胶共同开发的商业应用。
The performance of vinyl acetate-vinyl versatate latex has been up to styrene-acrylate and acrylate.
目前叔醋乳液的性能已经接近苯丙、纯丙，叔醋乳胶涂料得到迅猛发展。
carboxylated styrene-butadiene latex. C benzene latex. High-styrene rubber. Waterproof construction latex. Carpet for carboxyl SBR latex.
羧基丁苯乳胶。丙苯胶乳。高苯乙烯橡胶。建筑防水胶乳。地毯专用羧基丁苯胶乳。
The styrene-acrylic emulsion modified by double hydroxyl tetra-coordinated silicon was prepared by free radical emulsion polymerization.
通过乳液聚合方法，制备了双羟基四配位硅改性苯丙乳液；
The title water resistant silicone-modified vinyl acetate-styrene-butyl acrylate terpolymer is prepared by seed-emulsion polymerization.
通过种子乳液聚合法制备了有机硅改性的醋酸乙烯酯-苯乙烯-丙烯酸丁酯（醋苯丙）三元共聚防水乳液。
This announcement is necessitated by the escalation in the costs of key raw materials including acrylic monomers, styrene and glyoxal.
丙烯酸单体，苯乙烯和乙二醛等主要原材料成本上涨也起到了很大的推动作用。
Catalytic dehydrogenation of ethylbenzene is an important method for production of styrene.
乙苯催化脱氢是生产苯乙烯的主要方法。
Styrene-butyl acrylate copolymer was synthesized and its behaviors as solid phase microextraction (SPME) adsorbent were studied.
合成了苯乙烯-丙烯酸丁酯共聚物，研究了此聚合物作为固相微萃取吸附质的性能。
The experiment results show that ammonium salt of the styrene-maleic anhydride copolymer is a good surface sizing agent.
应用实验表明，苯乙烯-马来酸酐共聚物的铵盐是一种性能优良的表面施胶剂。
Stable modified styrene-acrylate emulsion was prepared by pretreatment of modified monomer and co-polymerization technology.
采取改性单体预处理再共聚工艺，制得稳定的改性苯丙乳液。
Consumers can be exposed to styrene from the fumes of building materials, photocopiers and tobacco smoke.
报告指出，一般消费者会通过建筑材料的挥发物、影印机以及吸食香烟接触该物质。
Through test the paper examines strength, toughness and interior pore's texture of carboxy butadiene styrene polymer-modified concrete.
通过试验探讨了羧基丁苯聚合物改性混凝土的强度、韧性及内部孔隙结构。
Experimental results show that the support has highly activity for the selective oxidation of styrene.
实验证明，本实验制得的载体硅胶对苯乙烯具有良好的催化活性。
A type of thermoplastic synthetic copolymer composed of various proportions of styrene, acrylonitrile and butadiene.
由各种比例苯乙烯、丙烯腈和丁二烯组成的一类热塑性合成共聚物。
High - impact polystyrene (HIPS) was prepared by styrene grafting copolymerization on the low cis- polybutadiene rubber.
以苯乙烯-低顺式聚丁二烯橡胶接技共聚制备高抗冲聚苯乙烯。
The resin of styrene-methyl methacrylate was a resin of widespread application domain.
苯乙烯-甲基丙烯酸甲酯具有广泛的应用领域。
HCH-810PS resin has excellent performance and spraying anti-linked flow, and with styrene by any mixing ratio.
HCH-810PS树脂具有良好的喷涂性能和防流挂性，且可与苯乙烯按任何比例混合。
The correlation between changes of tensile properties and Shore A hardness of air aged styrene-butadiene rubber (SBR) was established.
通过热空气老化试验，建立了丁苯橡胶（SBR）热空气老化拉伸性能变化率与邵尔A硬度变化值之间的相关性。
The proposed strategy was illustrated by simulations of bulk polymerization of styrene and fed-batch ethanol fermentation.
该方法的有效性在苯乙烯聚合反应器和乙醇流加发酵过程的仿真对象上得到了验证。
I'll use thin half round styrene strips and plastic weld to soften them and work the weld look into them with a metal tool.
我会使用薄一半一轮苯乙烯带和塑料焊接软化他们的工作和焊缝看看他们与一个金属工具。
PLASTICS. DETERMINATION OF RESIDUAL STYRENE MONOMER IN POLYSTYRENE BY GAS CHROMATOGRAPHY.
塑料.气相色层分离法测定聚苯乙烯中苯乙烯单体残留物
A chemical mechanical polishing pad comprising a water-insoluble matrix which comprises (A) a styrene polymer and (B) a diene polymer.
一种化学机械抛光垫，包含由（A）苯乙烯聚合物和（B）二烯聚合物构成的非水溶性基质。
ABS is produced by a combination of three monomers: acrylonitrile, butadiene, and styrene.
ABS是由丙烯腈、丁二烯和苯乙烯三种化学单体合成。
plastics . styrene acrylonitrile moulding and extrusion materials . part 1 : designation system and basis for specifications.
塑料止品。苯乙烯丙烯腈模制和挤制材料。第1部分：规范用标识系统和基础。
