IGBT
美 
英
- 网络绝缘栅双极晶体管(Insulated Gate Bipolar Transistor)；绝缘栅双极型晶体管；绝缘栅双极性晶体管
例句
The matrix transformer control system is designed with IGBT as the binictor of the main circuit and with DSP as the core.
本文以IGBT作为主电路开关器件，以DSP为核心设计了矩阵变换器控制系统。
IGBT design provides operation with steady current, saving at least 50% on electricity consumption.
绝缘栅双极晶体管设计提供稳定的运行电流，省电达50%以上。
The system used thyristor-control modules and IGBT modules as the main structure of the charging and discharging circuits.
系统采用晶闸管控制模块、IGBT模块为主要结构的充放电主电路；
From the late eighties to the early nineties, IGBT become a new composite device, which brings together the advantages of MOSFET and GTR.
IGBT作为八十年代末，九十年代初迅速发展起来的新型复合器件，它将MOSFET和GTR的优点集于一身。
This may be caused by many factors, and the parasitic capacitance of IGBT is proved to be the key by the experiment and the analysis.
通过实验和理论分析可以证明，其主要起因是IGBT的寄生电容。
Introduces the operating principle of IGBT and its application in experimental facility of chopped wave feedback brake.
文中介绍了IGBT的工作原理和其在斩波回馈制动实验装置中的应用。
According to the system performance and control algorithm requirements the thesis calculates the parameter of IGBT, capacitors and reactor.
根据系统性能要求和控制算法要求对主电路IGBT，电抗器和电容器参数进行计算。
Finally, through the combination of the above methods and conclusions, summarized the IGBT selection steps.
最后，综合了以上的方法和结论，归纳总结出在实际工况下，IGBT的选型步骤。
Combined with electric power electronic technology development, performance of the IGCT and IGBT converts are compared.
结合电力电子技术的发展，对IGCT和IGBT变频器进行了分析对比。
The results indicate that the scheme of diode plus IGBT and the chopper of protective resistance have better transient control performances.
分析结果表明，采用二极管整流桥加IGBT和保护电阻构成斩波器的措施具有较好的暂态控制效果。
With the system designed above, the experimental device that switch capacitor to compensate var based on IGBT is developed in this paper.
基于上述软硬件系统，设计了基于IGBT的电容器投切补偿装置的实验装置，并对其性能进行了实验分析。
The conducting path branches from the limited conducting path via the pure IGBT-switch back to the limited conducting path.
传导路径从受限传导路径处分出支路经由纯粹的IGBT开关回到受限传导路径。
For IGBT module in full bridge inverter circuit, the drive circuit by discrete semiconductor devices and experiments' results are given.
最后给出了针对全桥逆变电路IGBT模块设计的分立元件驱动电路及实验结果。
A controller with sequence timer circuit applied to IGBT spot welding inverter is introduced in this paper.
介绍一种应用于IGBT逆变点焊电源的时序控制器。
In this paper, technique of gate driving and protection of IGBT are described. Three examples of IGBT gate driving circuit are presented.
在本文中著重讨论了IGBT栅极驱动及保护的基本问题，并介绍了几个新的应用实例。
If you do not want to take very big IGBTs you have to use a crowbar at the generator side to protect the system against over voltage.
如果你不想用非常大的IGBT的话，又想使整个系统在过压时不被破坏，那么你不得不在发电侧用一个短路器。
WHEREAS, SLC agrees to deliver an IGBT based AC electric drive system for use on the aforementioned off-highway electric dump truck.
鉴于SLC同意提供基于上述越野自卸卡车用交流电力驱动系统的一台
It piecewise modeled the turn-on and -off transient of IGBT, and simulated the static characteristics by curve fitting method.
模型分阶段模拟IGBT的开关瞬态过程，并采用曲线拟合的方式实现对IGBT稳态特性的建模。
IGBT inverter technology, output stability, strong anti-grid fluctuations.
IGBT逆变技术，输出稳定，抗电网波动强。
Therefore IGBT drive technology and its application has become a hot research.
因此IGBT的驱动、保护及其应用技术也成为电力电子行业研究的热点。
Secondly, the mathematical model of permanent magnet synchronous motor and the non-linear factor model of IGBT are analyzed.
其次，分析了永磁同步电机数学模型和IGBT非线性因素模型。
Another line is directed via a diode, preferably a zener diode to the output of the IGBT-based switch.
另一导线经由二极管，优选地是齐纳二极管，导向基于IGBT的开关的输出端。
The IGBT pairs and protection devices are selected such that either pair alone can interrupt the current safely.
IGBT哒保护和对设备哒选择等，要么便可以的中断对当前哒安全。
By this filter the interfering signals are stopped from reaching the IGBT-based switch.
通过该滤波器，阻止干扰信号到达基于IGBT的开关。
The basic theory and characteristics of IGBT induction-heating power supply are introduced.
GBT感应加热电源以其优异的性能，已在许多工业领域得到应用。
It emphatically analyzes the drive circuit and protective circuit of IGBT arc inverter, and the application of IGBT.
重点分析了IGBT弧焊逆变器的驱动电路和保护电路，以及IGBT驱动模块和应用。
In this paper, the control system of IGBT inverter power source with microcomputer control for pulsed MIG welding is introduced.
介绍了自行设计开发的微机控制的脉冲MIG焊电源控制系统。
This article introduces the way that modulator circuit of the single pulse radar was realized by IGBT.
介绍了用IGBT实现单脉冲雷达调制器电路的方法；
The second stage includes IGBT-based half-bridge inverter, transformer and rectifier, which is the core of the main circuit.
第二级包括IGBT半桥逆变器、升压以及整流部分，这是电路的核心。
"Long Lead-Time Items" mean Traction Motors, Sibas Controls, IGBT modules and Alternators for the Equipment.
“订货提前期较长的部件”是指设备用牵引马达、连接控制器、IGBT模块和交流发电机。
The power supply use three phase Full-Bridge Controlled Rectifier and IGBT inverter.
主电路采用晶闸管三相全控桥整流电路，IGBT单相全桥逆变电路。
Therefore, the core of problem is to ensure dynamic voltage sharing.
因此，IGBT串联研究的核心是动态均压问题。
Switching the IGBT of the converter with very fast switching times.
以极其快速的切换时间切换变频器的IGBT。
As the large fault current occurs in DC power system, the paper makes use of IGBT to design a new type DC fault current limiter.
针对直流电网短路故障时迅速产生的短路电流，利用IGBT器件为核心，设计出一种新型的直流短路电网限流装置并阐述了其工作原理。
The application circuit of IGBT gate drive is discussed to increase the reliability of the IGBTs.
文中还就驱动电路的应用进行了讨论，以提高IGBT器件的使用可靠性。
The IGBT that failed also had its TVS string come disconnected (though the TVS's were not damaged).
失败的也有其IGBT电视串来连接（虽然没有电视的损坏）。
The IGBT as well as the diode chip are based on SPT (soft punch through) technology.
这里的IGBT和二极管二者的芯片都是基于SPT（软穿通）技术。
This paper will summarize the history and latest IGBT technology.
本文将总结IGBT技术的历史和最新进展。
RCD snubber circuit is designed to solve the IGBT switching loss problem.
RCD缓冲电路的设计降低了IGBT的开关损耗。
In control circuit, there are signal modulating circuits, isolating driver circuit of IGBT etc.
在控制电路中主要包括电流电压信号测量电路、IGBT的隔离驱动电路等。
