mouldings
美 [ˈmoʊldɪŋ] 
英 [ˈməʊldɪŋ]
- n.模塑；造型；铸造；模塑物
- 网络线脚；浇铸；木线条
词形变化
复数：mouldings 同义词
英汉解释
n. | 1. 模塑,作模;造型;翻砂,铸造;铸造物,模塑物;【建】花边,线脚,风景线 |
na. | |
英英解释
例句
Extra mouldings are made up to supplement the standard left-hand-drive dashboard moulding to take a huge array of equipment.
额外的装饰是由以补充标准左仪表板成型采取一个巨大的一系列设备。
It may also be used in a similar manner for multi-impression tubular shaped mouldings on underfeed and runner less moulds.
也可以类似的方式用于多模板或无流道模具的多型腔管形塑件。
starting with a small gate width, the mould is tried out with a short injection stroke so that short mouldings are obtained.
开始用一个较小的浇口宽度，在注塑机上一次短射试模，由此得到一些短缺的塑件。
This type of gate is used for tubular-type mouldings when more than one impression is required in a simple two-plate mould.
用于简单的两模板模具中型腔数多于一个的管形塑件。
Rather than using physical mouldings to design a car, as remains a common practice today, for instance, this is all done online at AACE.
举例来说，与今天依然存在的普通方法——使用物理模塑来设计汽车所不同的是，Satyam的汽车都是在AACE内部通过网络完成。
Plastics. Melamine-formaldehyde mouldings. Determination of extractable formaldehyde.
塑料.密胺甲醛树脂模制件.可提取甲醛含量的测定
Thus, during the latter part of the opening stroke the ejector assembly is pulled. thereby ejecting the mouldings.
因此，在开模行程的后阶段，顶料板组合被拉出，塑件因而被顶出。
To achieve optimum coating quality, the maximum moisture content of the mouldings must be less than 0. 1%.
为了达到最好的涂层质量，塑件的最高含水量不能超过0.
Fabricate frames, concealed stiffeners, reinforcement, edge channels, louvers and mouldings from either cold-rolled or hot-rolled steel.
制造门框，内加强筋，加强板，边槽，百叶窗和模件，可选用冷轧或者热轧钢板。
The sill extensions are visually integrated front and rear with the scalloped corners of the new bumper mouldings .
穿凿扩展综合视前方与后方的波浪角落的新保险杠接洽。
The facade of the temple is exquisitely decorated with plaster mouldings and murals of auspicious motifs.
庙宇正面饰有精致的灰塑及壁画，寓意吉祥。
This gate is used for single-impression tubular shaped mouldings on two-plate moulds.
这种浇口用于双模板上单一型腔的管形塑件。
The new bumper mouldings are much deeper with curved, uninterrupted surfaces.
新的保险杠模有更深弧形的，不间断的表面。
Why are we charging the customer 17% vat on mouldings, tooling yes but mouldings ?
为什么我们的收费上成型的顾客17%的增值税，是工具，但成型？
TAB GATE This is a particular gating technique for feeding solid block-type mouldings.
护耳浇口。这是用于注塑实体块形塑件的特殊浇注技术。
We want to buy Gaskets, Fittings, Mouldings and Tubes, Fire Hoses Plastic Moulding.
我们要采购垫圈，配件，模具管，消防喉塑料成型。
Testing of Plastics; Hot Storage Test on Mouldings Made of Thermoplastic Moulding Materials without External Mechanical Stressing
塑料的检验.在没有外部机械应力条件下.对热塑性模塑材料成形件的热贮存试验
Testing of Plastics; Heat Storage of Compression Mouldings Made of Thermosetting Compression Moulding Materials
塑料的检验.热固性模压塑料的压制件热贮存
Plastics - Phenol-formaldehyde mouldings - Determination of free ammonia and ammonium compounds - Colorimetric comparison method
塑料。苯酚-甲醛模塑。游离氨和铵化合物的测定。比色法
Rough castings of light metal alloys - Sand mouldings - General tolerances, machining allowances; inactive for new design
轻金属合金的铸件毛坯.砂模铸造.一般公差及加工余量.不适于新结构
Plastics - Phenol-formaldehyde mouldings - Determination of free ammonia and ammonium compounds - Indophenol method
塑料.苯酚甲醛注模.自由氨和胺化合物的测定.靛酚法
Phenol-formaldehyde mouldings--Determination of free ammonia and ammonium compounds--Colorimetric comparison method
酚醛模塑制品游离氨和铵化合物的测定比色法
Plastics - Phenol-formaldehyde mouldings - Determination of free phenols - Iodometric method
塑料.苯酚-甲醛模塑.单体酚的测定.碘量法
Methods of testing plastics - Chemical properties - Determination of acetone-soluble matter in phenolic mouldings
塑料的试验方法.化学性能.酚醛模制件的丙酮可溶物的测定
Flexible cellular polymeric materials - Sponge and expanded cellular rubber products - Specification - Part 2: Mouldings and extrusions
软质泡沫聚合材料.膨松泡沫和海绵多孔橡胶制品.第2部分：模压和挤压法
Aerospace series - Glass fibre reinforced mouldings and sandwich composites - Production of test panels
航空航天系列玻璃纤维增强模压件和夹层复合件试验板的制备
Specification for glass fibre reinforcing mouldings and sandwich composites - Production of test panels
玻璃纤维加强的压制件和夹层复合件.试验板的生产
Plastics mouldings; Tolerances and acceptance conditions for linear dimensions
塑料成型件.纵向尺寸的公差和验收条件
Code of practice for a system of tolerances for the dimensions of plastics mouldings
塑料模压件尺寸公差系统的实用规程
Determination of free phenols in phenol-formaldehyde mouldings--Iodometric method
酚醛模塑制品中游离酚的测定碘量法
Specification for phenolic mouldings for aeronautical purposes
航空用酚醛压制件规范
Plastics - Phenol-formaldehyde mouldings - Detection of free ammonia
塑料.酚-甲醛模塑.游离氨的检验
Aerospace; boron fibre reinforced mouldings, preparation of test laminates
航空和航天.硼纤维增强的模塑材料.塑料层压试制品的生产
Plastic over mouldings, composite plastics and metal components in the medical and domestic markets
医疗和家用市场中的塑料模制、复合塑料和金属部件
Phenolic mouldings--Determination of acetone-soluble matter
酚醛模塑制品丙酮可溶物的测定
Phenol-formaldehyde mouldings--Detection of free ammonia
酚醛模塑制品游离氨的检定
Heated tool welding of thermoplastics mouldings in mass production
大规模生产中热塑性模塑料的热工具焊接
Insert nuts; heavy type for plastics mouldings and pressure die castings with dead hole
塑料模制件和压铸件用重型闭式螺纹件
Closed Insert Nuts with Dead Hole for Plastics Mouldings
模塑用闭口螺纹套
closed insert nuts with disc for plastics mouldings
塑料模塑件用盘闭口螺母镶件
