thermomechanical
美 
英
- adj.形变热；有可能进行许多不同的形变热处理
- 网络热机械的；热机械上；热机械性
英汉解释
例句
In modelling terms, a coupled thermomechanical analysis represents a generalization of the computational mechanics of fracture and damage.
在模拟计算，耦合热分析是一个泛化的计算力学的断裂和损伤。
One of the key problems for thermomechanical treatment of aluminum alloy is how to determine the process parameters.
如何正确地选择和控制工艺方案及其参数，是影响铝合金形变热处理效果的一个关键因素。
The difference of thermomechanical coupling effect is the cause to result in IR feature difference between rock and PMMA.
两种材料热力耦合机制不同是导致受力红外辐射特征差异的根本原因。
Thermomechanical pulp (TMP): Superior, stronger mechanical pulp produced from steam-heated wood chips.
热法磨木浆：用蒸汽热化木片造成的高级，质地较强的机械浆。
By combining with process test, some thinking s about thermomechanical treatment of steel wire on the production line are put forward.
结合工艺试验，提出了在该生产线上对钢丝形变热处理的一些设想。
To describe the solidification in caster mold, a twodimensional fully thermomechanical coupled finite element model was established.
针对钢在板坯连铸结晶器内的凝固过程，建立二维完全热力耦合有限元分析模型。
PLASTICS. VOCABULARY APPLICABLE TO MECHANICAL AND THERMOMECHANICAL TESTS AND TO THEIR INTERPRETATION.
塑料.机械和热机试验及其描述用词汇
The results show that thermomechanical treatment is the effective method to increase the strength and plasticity of 7A04 aluminum alloy.
结果表明：形变热处理是使7A04铝合金的塑性和强度同时提高的有效途径。
A thermomechanical model for oblique cutting was proposed.
提出了斜角切削热力模型。
Vitreous and porcelain enamels - Determination of thermomechanical properties by means of a rapid test method
玻璃质釉和瓷釉。通过快速试验法对热机械性能的测定
Standard Test Method for Assignment of a Glass Transition Temperature Using Thermomechanical Analysis Under Tension
拉力下热机械分析的玻璃转变温度分配的标准试验方法
Factors Influencing Flocculation of Dissolved and Colloidal Substances in a Thermomechanical Pulp Water
滤液中溶解和胶体物絮聚的影响因素
Structure Evolution of a Nb-Microalloyed Extra-Low Carbon Steel during Simulated Thermomechanical Control Process
模拟控轧控冷过程含Nb超低碳钢的组织演变
Modelling of microstructural evolution of aluminium alloy during thermomechanical processing
铝合金热变形组织演化的模拟
Determination of glass transition temperature of plastics--Thermomechanical analysis
塑料玻璃化温度测定方法热机械分析法
Standard Test Method for Assignment of the Glass Transition Temperature by Thermomechanical Analysis
使用热机分析测定玻璃转变温度的标准试验方法
Bi-Material Microcantilever's Thermomechanical Performance and Materials Selection: An Analysis
双金属微悬臂梁的选材及热机械性能分析
Hot-rolled products in weldable fine grain structural steels - Delivery conditions for thermomechanical rolled steels
可焊接细品粒结构钢的热轧制品.热轧钢的交货条件
Standard Test Method for Indentation Softening Temperature by Thermomechanical Analysis
热力学分析压痕软化温度的测试方法
Study on the Process Parameters of Thermomechanical Treatment of Aluminum Alloy and Its Controlling
铝合金形变热处理工艺参数及其控制
Thermomechanical Treatment for the Automobile Steering Knuckle
汽车转向节形变热处理
Standard Practice for Strain Controlled Thermomechanical Fatigue Testing
张力受控的热机械疲劳测试惯例
Testing method for linear thermal expansion coefficient of plastics by thermomechanical analysis
塑料线膨胀系数试验方法
Microstructure and Properties in Heavy Die Standard Piece After Thermomechanical Heat Treatment
大型模具标准件形变热处理后的组织和性能
Effects of thermomechanical heat treatment processing on microstructures and properties of Cu-Zn alloy by minor Cr alloying
形变热处理对用微量Cr合金化的Cu-Zn合金组织性能的影响
Optimum Design of Masson's Pine Thermomechanical Pulp Reinforced Polypropylene Composite
马尾松热磨机械浆增强聚丙烯复合材料优化设计
Test Method for Temperature Calibration of Thermomechanical Analyzers
热机械分析仪温度校准的测试方法
An Analysis of Microcantilever's Thermomechanical Performance and Selection of Material
微悬臂梁的热机械性能分析及选材
Thermomechanical Behavior of SMA Long Fibers Reinforced Aluminum Matrix Composite
SMA长纤维铝基复合材料的热力学性能
Wood Influence on Thermomechanical Pulp Quality: Fibre Separation and Fibre Breakage
材种对热磨机械浆质量的影响：纤维分离与裂断
Properties and processing of thermomechanical treatment Cu-Cr-Zr alloy by artificial neural network
基于人工神经网络的铜合金形变热处理工艺和性能
Thermomechanical Reliability Simulations of IC - MEMS Devices. pdf
集成电路与MEMS器件的热机械可靠性仿真
Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis
用热力分析法测试实芯材料线性热膨的试验方法
Research and Progress of Thermomechanical Treatment of Aluminium Alloy
铝合金形变热处理工艺研究进展
The Effect of High Temperature Thermomechanical Cycle Treatment on the Microstructural Refinement of TiNi Alloy
高温形变循环热处理对TiNi合金组织细化的影响
Study on Wood Thermomechanical Pulp Reinforced Nylon Composite
木片热磨机械浆增强尼龙复合材料
Thermomechanical Properties of Helical Spring of Cu-based Shape Memory Alloys
Cu基形状记忆合金螺旋弹簧热机性能研究
Effect of Thermomechanical Treatment on Properties of 2519 Aluminum Alloy
形变热处理对2519铝合金性能的影响
Effect of Thermomechanical Control Process on Structure of Nb-Ti Microalloy Steel for Automobile
控轧控冷对含Nb-Ti微合金汽车用钢组织的影响
On-line Thermomechanical Treatment Process for N-80 Grade Oil Casing
N80级石油套管在线形变热处理工艺
