thin-walled
美 
英
- adj.薄壁(的)；薄墙的
- 网络薄壁的；薄壁形；薄箱
英汉解释
例句
This optimization process would be repeated until a set of parameters optimized for optimum design of a thin-walled structure was obtained.
不断重复整个过程，直到获得薄壁结构的优化设计参数。
However, due to the poor stiffness, thin-walled parts are easy to deformation in machining.
但是，由于薄壁件的刚性较差，在加工过程中很容易发生变形。
As a newly used material, steel thin-walled sonic-testing tubes used for the cast-in-situ piles have not a unified form of connecting.
混凝土灌注桩用钢薄壁声测管是一种较新的声测管材，其连接方法目前没有统一的形式。
To understand the overall mechanical properties of the thin-walled curved-box girders, an improved method is put forward in the paper.
为全面了解薄壁曲线箱梁的力学性能，本文提出一种分析薄壁曲线箱梁的改进方法。
The proposed method is applicable for the thin-walled member of any cross section with any boundary condition.
本方法适用于任意横截面形状和任意边界条件的薄壁杆件。
Refer to the analysis ot the wide, thin-walled flat steel box girder, it need the space analysis with the general finite element program.
对于宽幅、薄壁的扁平型钢箱梁结构的分析，需借助通用有限元程序对结构进行空间分析。
The crackle and breach defect of5A05, 5A06alloy thin walled tube is always one of the hard problems in cold rolling.
5A06合金薄壁管冷轧过程中的裂纹、裂口缺陷，一直是生产中较为棘手的问题之一。
Carry on an investigation into Thin-walled light steel structure residential building technical and economic characteristics.
对薄壁轻钢结构住宅建筑的技术经济特点进行了研究。
This research work is a further study of current calculating methods of the shear lag effect in thin-walled curved box girders.
针对目前薄壁曲线箱梁剪力滞计算方法作了进一步探讨，采用逐步回归的方法，建立最优回归方程。
Base on optimal design of the typical thin-walled rails, the crashworthiness of a sport utility vehicle's frame is improved.
以优化后的典型薄壁梁结构为基础，对越野车车架进行了碰撞安全性优化设计。
Buckling distortion is inevitable in thin-walled structures. This is one of the main problems which affect the quality of welded products.
翘曲变形是薄板结构焊接时难以避免的问题，它严重影响产品的质量。
Air filters comprising thin-walled textile filter bodies have to be cleaned periodically.
包括薄壁织物过滤体的空气过滤器必须定期清洗。
Taking the oil pan of an engine as an example, the FEM model of a thin-walled structure is established.
以某发动机油底壳为研究对象，建立了薄壁结构的有限元实体模型。
At this time, the optimal expanding structure get shorter, so the influence of the truncated thin-walled tube is analysed.
此时的最优扩径结构长度上变短，对变刚度结构前部扩径薄壁管截短的影响进行分析。
Composite Thin-walled curved surface structures are widely used in aeronautic and aerospace engineering.
复合材料薄壁曲面结构在航空航天领域中获得了广泛的应用。
Many thin-walled structure components used in aero industries have complex structure and high machining accuracy.
航空薄壁件结构复杂，精度要求高。
Cold-formed thin-walled steel members are the main member of light steel structure.
冷弯薄壁型钢是轻钢结构的主要构件形式。
Therefore, the spinning of thin-walled tube with large thickness reduction can be realized through multi-pass ball spinning.
因此，通过多道次滚珠旋压可实现大减薄量薄壁筒形件的旋压成形。
Coronal reconstructed images are useful in localizing the thin walled cystic mass and its anatomic relationships.
冠状位重建图像在定位上和确定其解剖学关系是非常有用的。
Results The diagnostic mainstay of lymphangioleiomyomatosis was thin-walled cystic lesion with diffused distribution in bilateral lung.
结果两肺均匀弥漫分布的大小不等的薄壁囊腔是诊断该病的主要依据。
With new research ideas, thin-walled tube occur plastic deformation by expanding to achieve the purpose of energy absorption.
继而从新的思路，以扩径作为薄壁管的变形方式进行抗撞性研究。
Because there is no component compact, fragile and thin walled parts can be confidently cleaned.
工件间没有碰撞，对易损件、薄壁件也可放心地清理。
It indicated that the accuracy meets the requirements. Some instructions to the design of various thin-walled deep beams were obtained.
结果表明：精度满足要求，对各类薄壁深梁的设计具有指导意义。
The hollow- sinking of a thin - walled tube is more complicated than the drawing. So far there are few references on it.
薄壁管无芯推压缩径成形过程比薄壁管拉拔成形过程复杂得多，迄今很少有这方面的文献报道。
and thin-walled light steel structure residential construction are important elements of anti-corrosion and fire treatment were introduced.
并对薄壁轻钢结构住宅施工中的防腐蚀及防火处理等重要环节进行了介绍。
An explicit finite element method for the evaluation of dynamic effects of thin-walled structure in impacting processes was presented.
提出了一种计算受冲薄壁结构动力效应的显式有限元方法。
The results show that non-uniform thin-walled stress is the main reason of the frequent rock burst in driving roadway.
结果表明：非均匀薄壁应力现象的存在，是掘进工作面岩爆频发的重要原因；
An effective algorithm for calculation of the sectional properties of thin-walled bars with general sections is presented in the paper.
针对任意截面形式的开闭口薄壁截面几何特性的计算，提出了一种便于计算机实现的比拟有限元法。
Practice shows that the process to take some measures to solve thin-walled parts can be effectively deformed and not high precision.
实践证明，采取一定的工艺措施可以有效的解决薄壁零件变形及加工精度不高等问题。
The tool electrode is formed to be thin-walled pipe, and high pressure gas medium is supplied through it.
工具电极呈是薄壁管状，内部接通高压保护气体介质。
When determining the diameter tolerances, remember that thin-walled rings of radial bearings may become slightly deformed after grinding.
当测量直径公差时，记得的径向轴承在研磨后可能产生微小变形。
The results of this paper can give a reference to the engineering application of cold-formed thin-walled steel structure.
本文研究成果可为此类节点在冷弯薄壁型钢结构体系的实际工程应用提供参考。
Out plastering wall with mortar thin walled core tube and its construction method were introduced in the paper.
介绍一种轻型墙体-砂浆薄壁芯管外抹灰墙体及其施工方法。
When designing this kind of bridge, the signal thin-walled pier and signal double-walled pier are usually used.
在设计此类大桥时，桥墩形式最常采用竖直双薄壁墩和竖直单薄壁墩。
Hydro-mechanical deep drawing (HDD) is an effective method for manufacturing thin-walled parts.
充液拉深（HDD）技术是薄壁零件成形的一种有效方法。
In this paper the research on thin-walled structure is one type of particular thin-walled structure -the thin-walled bar structure.
本文研究的是一种特殊的薄壁结构——薄壁杆件结构。
An analytical method is proposed for calculating free torsion constant of complicated thin-walled cross section from free torsion theory.
通过自由扭转理论推导出复杂薄壁箱梁断面的自由扭转惯性矩的计算方法；
A complicated thin-walled box girder is taken as a validity numerical example to verify the analytical method.
采用实际复杂薄壁箱梁断面进行了数值验证，并和使用有限元方法计算的结果进行了比较。
Box-type parts of the structure of complex thin-walled and non-uniform, multi-site processing, processing is difficult.
箱体类零件的结构复杂，壁薄且不均匀，加工部位多，加工难度大。
The stiffener layout optimization of thin walled structures is addressed in this article using a topology optimization method.
采用拓扑优化方法研究了薄壁结构的加筋布局优化问题。
