bevel
美 [ˈbev(ə)l] 
英 ['bev(ə)l]
- v.斜；把…截成斜角形
- n.斜面；斜边；斜角规
- adj.斜的；斜削的
- 网络倒角；斜切；倾斜
词形变化
复数：bevels
英汉双解
1. | 斜边；斜面a sloping edge or surface, for example at the side of a picture frame or sheet of glass |
2. | 斜角规a tool for making sloping edges on wood or stone |
英汉解释
英英解释
例句
Use a Brush Tool to add a bit of a highlight on the bevel. Use the Blur Tool to soften the highlight.
用画笔工具在斜面上添加一小块高光。使用模糊工具来软化亮点。
This means the motor drive shaft axis parallel with the drum, canceled easy to damage the bevel gears, drive more simple.
这种传动方式的电动机轴与滚筒轴平行，取消了容易损坏的锥齿轮，使传动更加简单。
This model is classical metallic European style, whose bevel design style looks elegant and easy to clean surface.
这个设计是古典欧式金属风格，它的边角设计看起来高贵并且易于清洗。
In these cases it is often good design practice to go to the spiral bevel gear, which is the bevel counterpart of the helical gear.
在这种情况下，往往是好的设计实践中去，以螺旋锥齿轮，它是锥对应的螺旋齿轮。
To give your text the appearance of depth by adding or changing an edge, point to Bevel, and then click the bevel that you want.
要通过添加或更改边缘为文字赋予深度外观，请指向“棱台”，然后单击所需的棱台效果。
Bevel gears are useful when the direction of a shaft's rotation needs to be changed.
当两传动轴旋转时需改变方向时，采用锥齿轮是一种十分有用的方法。
Spiral bevel gears are usually used to improve the bearing capacity of the angle transmission gears on drill rigs.
在钻机里常采用弧齿圆锥齿轮提高角传动齿轮承载能力。
Bevel the burr hole on the edge of the side where the Micro Sensor will exit. This will facilitate removal of the Micro Sensor.
在微传感器探出的边将单孔削成斜角，这能辅助微传感器的移走。
Using the spiral bevel gear as the research objective, the system put up the dynamic analysis of spiral bevel gear in the high level.
论文以弧齿锥齿轮系统为研究对象，对高速级弧齿锥齿轮进行了动力学分析。
A contrast experiment for the spiral bevel gears was carried out on a rotor test facility with elastic supports.
在转子系统模拟试验台上，对发动机主传动锥齿轮接触性能进行了实验研究。
The company is the domestic processing of the few large spiral bevel gear manufacturer one.
本公司是国内为数不多加工范围较大的弧齿锥齿轮制造厂家之一。
The meshing contact-impact and contact performance of spiral bevel gears has a strong impact on the whole machine performance.
螺旋锥齿轮的啮合接触冲击特性和动态接触性能的好坏严重影响其整机的工作性能。
This paper describes the difference between the terms of groove and bevel in weld joints and condition in ASME Code translation .
本文叙述焊接接头中术语剖口与坡口的区别和在ASME规范翻译中应注意的问题。
Used for details within the icons and bevel highlight.
用于图标和斜面高光处的细节。
and a supporting tube is sleeved outside the spline shaft position between the box body and the gearbox body of the bevel gear.
位于箱体和伞齿轮变速箱体之间的花键轴部位外套支撑管。
This paper analyses the factors influencing the service life of spiral bevel gears on rigs and proposes some measures to improve them.
该文分析了影响钻机弧齿圆锥齿轮工作寿命的因素，并提出了改进措施。
The object feeding box is composed of an object separation bevel and a bearing chassis.
该物件馈送匣包含有一物件分离斜面及一承载底盘。
A way of promptly repairing mesh interspace and mesh width during the course of assembling bevel gear is introduced.
介绍一种锥齿轮装配过程中，修配啮合间隙和啮合宽度的快捷方法。
The purpose of this paper is to provide the theoretical basis for designing high-tooth spiral bevel gear cutter head.
本文的研究为等高齿弧齿锥齿轮的刀盘设计提供理论基础。
Spur gear (SGA) or compound bevel gear (BGA) attachments can be provided in any position shown in Figure 1.
如果采用正齿轮（SGA）或复合伞齿轮（BGA）附件，则可以在图1中显示的各个位置安装手轮。
The whirly demoulding mechanism designs of shape-gear and the whirly plastic parts of bevel gear injection mould were introduced.
介绍了斜齿轮塑件注射成型模具的齿形型腔旋转式和斜齿轮塑件旋转式两类脱模机构设计。
The principle of the bevel type differential can be seen if the unit its considered as two discs and a lever (Fig. 3-19).
该伞型微分原理可以看出，如果单位认为其作为两个光盘和一个杆（图3-19）。
The research achievement in this paper will provide reference for the design of the bevel foundation in the seasonal frozen soil region.
本文的研究成果将为季节冻土区斜面基础的设计提供参考。
Spiral bevel gear is the mechanical transmission fundamental element. Its space shape and the machining process are very complicated.
螺旋锥齿轮是机械传动的基础元件，其空间形状和加工过程相当复杂。
The bevel and mix operators and correlation operator were respectively chosen as the focus measure method of coarse search and fine search.
选取边缘检测算子和卷积算子分别作为调焦粗搜索和精搜索阶段的清晰度评价算子。
I used a new layer set to multiply and a vague Bevel and Emboss layer style to add some depth to the cracks.
我又新建了一个图层设置成正片叠底，通过斜面浮雕的图层效果增加裂痕的厚度。
Matching numbers were engraved on the small bevel gear bevel gear head and a large back taper.
配对号分别刻在小圆锥齿轮头部和大圆锥齿轮的背锥部。
The inner gears have been made with splines and a bevel modifier.
内部的传动机构是用样条线配合倒角修改器做出来的。
Moreover, the formula of optimal bevel slotting angle has also been checked by an example.
而且通过实例验证了两变厚齿轮斜向插削角度计算公式的正确性。
The results show that the stress distributions in roots of the bevel gear are different under respective loads.
光弹性试验结果表明锥齿轮在两种载荷分别作用下，齿根应力分布是不同的。
The differential case supports the differential-pinion gear on a shaft, and this gear meshes with the two bevel gears.
差速器壳支承在行星齿轮轴上，行星齿轮与两个半轴齿轮相啮合。
bevel gear : Either of a pair of gears with teeth surfaces cut so that they can connect unparallel gear shafts.
斜齿轮：用以连接不平行齿轮轴齿轮的任一对齿面切削。
Moreover, the computation simplification algorithm and processing of the bevel value is presented in the paper.
另外，本文对于斜角值计算的简化算法及处理流程也做了研究。
Direct drive to the rolls with heavy-duty helical bevel gears where the output shaft is directly coupled to the roll shaft.
高坚固的螺旋斜线轴承直接驱动辊筒。输出轴直接连接辊轴，中间没有任何传动消耗。
The space is effectively utilized by adopting a bevel gear driving mechanism, and the volume of the ejection device is greatly reduced.
采用锥齿轮驱动结构来有效地利用空间，大大减小弹射装置的体积。
The gradient of back bevel of condyle process should positive correlation to the gradient of back bevel of glenoid fossa in deflected side.
偏斜对侧髁突后斜面斜度与关节上间隙，关节结节高度呈负相关。
Straight as well as bevel cuts are possible with the wall saw.
直锥以及正在播出的墙上看到削减。
Another difficulty, which occurs in predicting the stress in bevel-gear teeth, is the fact the teeth are tapered.
另一个困难是，它发生在预测应力锥齿轮牙齿，是一个事实，牙齿是锥形。
The quenching distortion of rear axle spiral bevel gear used in FLAT tractor is studied in this paper.
研究了菲亚特拖拉机后桥大圆锥螺旋齿轮淬火变形规律，分析了原淬火压模存在的问题。
A new type of combination electrode of spiral bevel gear is developed. The design procedure of the electrode is presented.
研制了螺旋锥齿轮新型组合电极，提出了设计方法。
