thermoplastics
美 
英
- n.热塑塑料；热塑性物质
- adj.热塑性的
- 网络热塑性塑料；热塑性塑胶；热固性塑料
词形变化
复数：thermoplastics 反义词
英汉解释
英英解释
例句
Moreover, lightweight thermoplastics due to its good performance will be applied to automobile and transportation, etc.
由于其独特的性能特点，轻质热塑性片材必将在汽车、交通等领域获得更为广泛的应用。
The two key points about the flow of thermoplastics are that the behavior is non-Newtonian and that viscosities are very high.
热塑性塑料流动性主要有两点：非牛顿流体以及很高的粘度。
And all-starch thermoplastics was developed with starch as raw material and a little amount of degradable additive.
以淀粉为原料，添加极少量的可降解的助剂，形成全淀粉热塑性材料。
Plastics piping systems. Thermoplastics valves. Test method for the integrity of a valve after temperature cycling under bending.
塑料管道系统.热塑阀门.弯曲下温度周期变化后阀门完好性的测试方法
plastics piping and ducting systems . thermoplastics pipes . test method for resistance to external blows by the round - the - clock method.
塑料管道和导管系统。热塑管。抗日夜外部连续冲击应力的试验方法。
Thermoplastics: Materials which have the property of softening repeatedly on the application of heat, and of hardening again on cooling.
热塑性物料：能重复的因受热而软化，冷却而硬化的物料。
The silane effect noted with some of these fillers and pigments in common thermoplastics will be described specifically .
下面将具体叙述观察到的硅烷在常用的热塑料中与几种填料和颜料的反应。
Marie, Mich. "We do a lot of laminating of continuous fiber wetted out with thermoplastics, " Ball said.
玛丽，密歇根州“我们做了很多层压连续纤维润湿与热塑性塑料，”球说。
plastics piping systems . thermoplastics valves . test method for the integrity of a valve after an external blow.
塑料管道系统。热塑性塑料阀门。外部冲击后阀门完好性的试验方法。
plastics . polypropylene and propylene - copolymer thermoplastics . determination of isotactic index.
塑料制品。聚丙烯和丙烯共聚物热塑塑料。全同立构指数的测定。
This is recognized by the fact that thermoplastics are usually heated to a soft state and then reshaped before cooling.
这由事实认可热塑性塑料通常被加热对一个软的状态在冷却之前然后被改造。
The present invention relates to a thermoplastics envelope-core reinforced gear. It consists of thermoplastics and high-strength material.
热塑性塑料包芯增强的齿轮，由热塑性塑料和高强度材料组成。
Plastics welding personnel - Qualification testing of welders - Thermoplastics welded assemblies.
塑料焊接人员.焊工资格检验.热塑焊接组件
Determination of Thermoplastics under certain conditions, the melt flow rate of the special equipment.
测定热塑性塑料在一定条件下的熔体流动速率的专用仪器。
Minimum scrap loss. Runners, gates, and scrap can usually be reground. Recycled thermoplastics can be injection molded.
废料损失最小化：浇道、闸道和废料通常可以重新研磨。循环热塑性塑料可以注塑成型。
Compared with thermoplastics, what are the advantage and disadvantage of thermosetting plastics?
相比之下，热塑性塑料、热固性塑料的有利和不利的地方有哪些？
Plastics piping systems. Thermoplastics pipes. Determination of resistance to internal pressure at constant temperature.
塑料管道系统.热塑塑料管.恒定低温度下耐内压性能的测定
Plastics piping systems. Thermoplastics fittings. Test method for mechanical strength or flexibility of fabricated fittings.
塑料管道系统.热塑塑料配件.组装配件的机械拉伸强度或柔韧性的试验方法
Filler materials for thermoplastics - Scope, designation, requirements, tests.
热塑性塑料用填充材料.范围、名称与符号、要求和试验
The rheology of a thermoplastics melt is complex, being very dependent on temperature and shear rate.
热塑性树脂熔体流变学是复杂的，十分依赖于温度和剪切速率。
Mufflers molded with long fiber thermoplastics demonstrate improved dimensional stability as compared to known short fiber based moldings.
与已知的短纤维基模塑制品相比，用长纤维热塑性塑料模塑的消音器具有改进的尺寸稳定性。
Plastics piping and ducting systems. Injection-moulded thermoplastics fitting. Test method for visually assessing effects of heating.
塑料管道和导管系统.注模热塑配件.热效应目视评定的试验方法
Plastics hoses - Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharghe of aqueous materials - Specification.
塑料软管.含水材料抽吸和排放用螺旋热塑增强热塑性软管.规范
The fuselage and the wing which are made of thermoplastics are elastic and durable.
机身和机翼用热塑料制成，富有弹性，并且耐用；
Plastics piping systems. Thermoplastics piping systems for soil and waste discharge. Test method for airtightness of joints.
塑料管道系统.土壤和废料排出用热塑管道系统.粘接处密封度试验方法
Traditional plastics are not biodegradable; recycling of plastics, especially thermoplastics, has become an important industry.
塑料不能生物降解，但塑料的资源的回收与再利用，尤其是热塑性树脂，已成为一个重要的行业。
Plastics piping systems. Determination of moisture content in thermoplastics by coulometry.
塑料管道系统.比色法测定热塑材料的含水量
Molecules of thermoplastics take the form of long chains.
这些物料的分子是链状结构。
Other plastics can be repeatedly repeated to return to the plastic state; they are thermoplastics.
其他塑料可以反复加热返回到塑性状态，它们是热塑性塑料。
Plastics piping systems. Thermoplastics valves. Test methods for resistance to internal pressure and leaktightness.
塑料管道系统.热塑阀门.抗内压和防泄漏的试验方法
The application of thermoplastics with small hole injection molding technology in TV' s covers is introduced.
论述热塑性塑料微孔注射成型技术在电视机外壳上的应用。
Acetal is among the strongest and stiffest of all thermoplastics.
在所有的热塑性塑料中，乙缩醛具有最高的强度和硬度。
PLASTICS PIPING SYSTEMS. THERMOPLASTICS FITTINGS. TEST METHOD FOR IMPACT STRENGTH. (EUROPEAN STANDARD EN 12061).
塑料管道系统.热塑配件.冲击强度的试验方法（EN12061）
In this work, cyanate ester resins were modified with thermoplastics and renewable resource, i. e. epoxidized soybean oil(ESO) respectively.
本论文分为两部分，分别采用热塑性树脂和生物基材料环氧大豆油对氰酸酯进行了改性研究。
Thermoplastics pipes - Determination of tensile properties - Part 1 : general test method.
热塑管.拉伸特性的测定.第1部分：一般试验方法
Is easy to disperse in rubber , thermosets and thermoplastics greases and printing ink . It will not lump or agglomerate in handing .
易于分散在橡胶，热固性塑料及热塑性塑料，油脂，油墨中。凝结不结团。
Testing of welded joints of thermoplastics semi-finished products - Part 5 : macroscopic examination.
热塑半成品焊接接头的试验.第5部分：宏观检验
THERMOPLASTICS VALVES. FATIGUE STRENGTH. TEST METHOD. (EUROPEAN STANDARD EN 28659).
热塑料制阀门.耐疲劳强度.试验方法.（欧洲标准EN28659）
Testing of welded joints of thermoplastics semi-finished products - Part 8 : requirements.
热塑性半成品的焊接接头试验.第8部分：要求
THERMOPLASTICS VALVES. TORQUE. TEST METHOD. (EUROPEAN STANDARD EN 28233).
热塑料制阀门.转矩.试验方法.（欧洲标准EN28233）
