axisymmetric
美 [æksɪsɪ'metrɪk] 
英 [æksɪsɪ'metrɪk]
英汉解释
英英解释
例句
After being renormalized with the standard scheme, the thermodynamical entropy of the general stationary axisymmetric black hole is found.
从而，我们得到了经过重整化的一般稳态轴对称黑洞热力学熵表达式。
A complicating factor is uncertainty surrounding the choice of axisymmetric exhaust nozzle geometry and ventral strakes in the long term.
轴对称排气喷口的几何形状以及腹鳍边条周围环境的不确定性是一个复杂的因素。
Fast tool servo (FTS) is one of the key technologies in both non circular turning and non-axisymmetric turning fields.
快速刀具伺服机构（FTS）是非圆数控车削和非轴对称车削的一项共同的关键性技术。
Interaction between the axisymmetric and non- axisymmetric disturbances in a vortex flow is investigated .
本文研究涡旋流动中轴对称和非轴对称扰动的相互作用。
Its sensing component is an axisymmetric shell resonator, and the cylindrical shell may be onc of the practical resonator.
其敏感部件是一个轴对称壳谐振子，圆柱壳便是其中一种。
The characteristics of axisymmetric waves propagation are compared between viscoelastic cylindrical tube and elastic cylindrical tube.
比较了引入损耗因子后粘弹性圆柱管与弹性圆柱管中轴对称波传播的特性。
The structures of unsteady cavitating flows around a blunt axisymmetric body were investigated by the experimental and numerical methods.
本文采用实验与数值模拟相结合的方法对绕平头回转体的空化流场进行了研究。
The investigation shows that the separation shock wave gives an important effect on internal performance of axisymmetric vectoring nozzle.
研究结果表明，喷管内的分离激波是影响轴对称矢量喷管性能的重要因素。
Propagation characteristics of high frequency longitudinal axisymmetric modes in full-length-bonding bolt are studied.
分析高频纵向轴对称超声导波在全长黏结型锚杆中传播的特性。
The problems of deformation for shaft lining are investigated under arbitrary axisymmetric normal loads and tangential loads with end loads.
对有限长立井井壁在任意轴对称的法向、切向以及端面荷载的共同作用下的变形问题作了分析研究。
The radial magnetic pressure of axisymmetric coil can be calculated by algebraic analysis.
采用代数解析的方法，计算了轴对称线圈所受到的磁场力的径向分量。
Metastable states turn out to contain contributions only from the axisymmetric mode, and at most one single non-trivial Fourier mode.
亚稳状态变成只包含从轴对称模式的贡献，并在最单一的非平凡的傅里叶模式。
The cases of two dimensional and axisymmetric shrinking were discussed.
讨论了二维轴对称可收缩问题。
The axisymmetric numerical model of the bypass cascade thrust reverser was established.
建立了外涵叶栅反推器的轴对称计算模型；
This method is suitable for various axisymmetric varying temperature field questions in engineering.
该方法适用于工程中各种轴对称变温场问题。
It can be used for the structural analysis of axisymmetric shells in engineering.
该结果可应用于工程中轴对称壳体的结构分析。
The vadility of the technique is demonstrated by simulating impact response of axisymmetric spent nuclear fuel-shipping cask.
该方法的有效性通过模拟核废料装运捅的冲击响应得到了验证。
Modes of the non-axisymmetric buckling were obtained by the proposed method.
该方法直接得到非轴对称的屈曲模态。
One model used axisymmetric exhaust nozzles fully open, and the other used axisymmetric exhaust nozzles fully closed.
一个模型的轴对称喷气口完全打开，其它模型的轴对称喷气口关闭。
The non-axisymmetric buckling maybe happens for annular plates even if under the condition of axisymmetric loading and boundary constraint.
对于环形板，即使在轴对称载荷和边界约束条件下，也可能发生非轴对称的屈曲状态。
The new type equivalent source method (NESM) is applied to the nonlinear magnetostatic field of the axisymmetric field.
首次提出用新型等效源法求解轴对称非线性静磁场问题。
Section 6. 13 contains the treatment of an initial - value problem for the axisymmetric motion of infinite elastic medium .
第6·13节中包含对无穷大弹性媒质的轴对称运动的初值问题的讨论。
Numerical simulation of finite element for pile under uplift loading is done by axisymmetric model.
利用轴对称模型对等截面桩进行承受上拔载荷作用的有限元模拟。
A mathematical model of axisymmetric compression of semi-solid alloy slurry was described.
描述了一种轴向挤压的半固态合金浆料的数学模型。
Enrich the plastic limit analysis of cylindrical shell under axisymmetric loads.
丰富了圆柱壳在轴对称荷载作用下的塑性极限分析。
A two-dimensional axisymmetric finite element model of sampling tube and sediments is built.
建立了取样管与沉积物接触的二维轴对称有限元模型。
The element free Galerkin method is applied into analysis of axisymmetric geometrical nonlinearities.
应用无网格伽辽金法对轴对称几何非线性问题进行了分析。
An axisymmetric coupled thermo -mechanical model for inertia friction welding process of large-sized GH4169 alloy ring part is established.
建立了GH4169合金大型环形件惯性摩擦焊的轴对称热力耦合分析模型；
A general program using finite-difference method is written to calculate the flow field of supersonic axisymmetric nose inlet.
为了计算超音速轴对称头部进气道的流场，采用有限差分法编制了一个通用计算程序。
The design builds on previous work on non-axisymmetric profiled endwalls by combining them with three-dimensional blade design.
本设计建立在先前非轴对称成型端壁的工作基础上，结合了三维叶片的设计
The near field of the CO2 laser with three dimensional axisymmetric folded-combined cavity is analyzed when it is misalignment.
针对三维轴对称折叠组合腔CO2激光器在失调运行时的近场特性进行分析。
Based on the injection-locking principle, the phase-locking mechanism of axisymmetric folded-combined CO2 laser is analyzed.
基于注入锁定原理，对轴对称折叠组合CO2激光器的相位锁定机制作了分析。
Rear quarter view of J-20 prototype showing the axisymmetric nozzles and strakes (Chinese Internet).
歼20的斜后视图，轴对称的喷口和边条。
In addition, you can use the fluid acoustics application modes with 1D and 1D axisymmetric geometries.
此外，您可以使用液体声学应用模型的1D和1D轴对称几何体。
An eigenvalue method was proposed to study the singular stress field at the axisymmetric interface wedge of the fiber reinforced composites.
本文提出了一种分析横观各向同性纤维增强复合材料轴对称界面端的奇异应力场的特征值法。
A two-dimensional axisymmetric hybrid particle-in-cell and Monte Carlo Collision model is developed to study the Hall effect thruster plume.
采用粒子网格单元与蒙特卡洛碰撞相结合的方法，建立霍尔效应推力器羽流的二维轴对称模型。
Effect of stiffening rings on the characteristics of the vibration and sound field radiated by an axisymmetric shell
环肋对两端带半球帽圆柱壳声振特性的影响
Accurate determination of a balanced axisymmetric vortex in a compressible atmosphere
在可压缩大气里平衡轴对称涡旋的精确测定
The Axisymmetric Mixed Boundary-Value Problem of the Vertical Vibration of a Rigid Foundation on Saturated Layered Soil Subgrade
上覆单相弹性层的饱和地基上刚性基础竖向振动的轴对称混合边值问题
Experimental investigation of static internal performance for an axisymmetric vectoring thrust nozzle
轴对称矢量喷管内流特性的模型试验
