reheating
美 [ˌriˈhit] 
英 [ˌriːˈhiːt]
词形变化
第三人称单数：reheats 现在分词：reheating 过去式：reheated 同义词
英汉解释
英英解释
例句
Increasing the temperature and holding time of reheating, central carbon segregation can be improved a great deal.
通过提高加热炉的加热温度和时间，板坯中心偏析将得到很大程度的改善。
To her, majoring in painting was an act of insanity akin to majoring in photocopying or reheating leftovers. Ginny's mom was born practical.
对她来说，主修绘画简直跟主修复印技术和加热剩饭一样，是种疯狂的行为。
Therefore, the thermosetting plastic unable to repeatedly by reheating molding, thermosetting plastic waste recycling usually is not used.
因此，热固性塑料无法经由再加热来反复成型，所以热固性塑料的废料通常是不可回收再利用的。
Measures to be taken in infrared measurement at the soaking section of a reheating furnace are put introduced through actual examples.
通过实例介绍了加热炉均热段红外测温应采取的措施。
Two microwaves are used for reheating, but the electric spice-grinder and liquidiser are mostly kept in their boxes in a storeroom.
有两个微波炉被用来为菜重新加热，但电动香料研磨机和榨汁机大多数情况下都放在储藏室的箱子里。
Air for combustion of the gas travels through the flues of previously fired sections, cooling these anodes while reheating the air.
燃烧空气通过以前的燃烧部分烟洞流出，在加热空气时冷却这些阳极。
The thermal states of the steel workpieces heated in a reheating furnace are used to optimize the control of the furnace.
主要讨论如何基于工件（钢锭、钢坯等）的热状态来进行均热炉的优化控制。
Reheating furnace is one of the key equipments in hot process. It use the high percentage of energy in the plant.
钢坯加热炉是钢铁厂很典型的热工设备，它的能耗占整个工业能耗的很大比例。
An introduction of a son of new style slide rails design for continuous rolling mill reheating furnace.
介绍了一种用于轧钢厂连续式加热炉中的新型滑轨。
The requirement to flow, pressure, heating temperature and purity of converter gas used in reheating furnace were introduced.
介绍了加热炉在使用转炉煤气作为燃料时，对其流量、压力、加热温度和纯洁度的要求。
Thistechnology can be widely applied to rolling mill reheating furnace and should be greatly promoted.
该技术在轧钢加热炉上有广泛的应用和推广价值。
The heat flux to slab surface of a walking beam reheating furnace is simulated.
以某轧钢厂的一座步进梁式加热炉为例，对其钢坯表面热流进行了模拟计算。
At present, domestic multiple-axes roller reheating furnaces are widely used in domestic. . .
滚子加热炉各轴区温度分布差异大的问题普遍存在。
Oxidation of Si in the converter can generate large volume of heat, which only 19. 84 percent can be used for reheating the metal.
铁水中的硅在转炉内氧化并产生大量的热量，其中仅有19.84%的热量用于加热金属。
Moreover, the dope of printing frit enhanced the adhesion obviously but destroyed the conductivity and reheating stabilization severely.
另外，熔块粉的加入使结合强度显著增强，但同时电导率和重烧稳定性变差。
The characteristics of regenerative ladle reheating system are introduced, and heating performances are analyzed.
介绍了蓄热式钢包烘烤器的特点，并对其加热性能进行了分析。
You might need to add a couple more minutes, but it's better than having to waste energy by reheating an oven multiple times.
您可能需要多用上点时间，但这好过您使用多次而浪费更多的能源。
The results show that magnetic properties can be improved by lower slab reheating temperature.
实验结果表明，采取较低的板坯加热温度可以改善CSP无取向电工钢的磁性能。
Grinding ball of spheroidal graphite cast iron with martensitic matrix was usually produced by reheating and quenching after casting.
马氏体基球墨铸铁磨球一般采用砂型（或金属型）铸造成形后，再重新加热进行淬火。
Prediction model and online compensation of slab surface temperature for stepping reheating furnace were studied.
主要研究步进式加热炉钢坯表面温度预报模型和在线补偿方法。
This paper described the application of double cross limiting range combustion control system in the walking beam reheating furnace.
介绍了双交叉限幅燃烧控制系统在唐钢步进式轧钢加热炉上的应用。
Precooked pancakes, which are frozen and ready for consumption after microwave reheating, have become popular in recent years.
已煮过的薄煎饼，结冰和为消耗量准备在微波重新加热之后，近年来变得普遍。
The harmony of mill line with the reheating furnace will be realized and the productivity raised through the use of this model.
通过该模型的应用，可以实现轧线和加热炉的协调，提高生产率。
Cold-hot stamping non reheating metal printing plate, but making cards and membership cards making adhesive transfer metal foil.
冷烫印不需使用加热后的金属印版，而是利用制卡和会员卡制作粘合剂的方法转移金属箔。
Short-term strategies for reversing these things include, respectively, reheating, cleaning, and the Hopfield net.
逆转这些情况的短期策略分别是重新加热、做卫生和使用Hopfield网络。
It may then be bent or crumpled, but on reheating, will violently untwist, reforming its original shape.
随后它可能被弯折成其它形状，但一旦再次加热，就会迅速地自动恢复成最初的圆圈状。
Meanwhile, the influence key factors on indexes of regenerative reheating furnace are simply analyzed.
同时对影响蓄热式加热炉达产达标的关键因素进行了简要分析。
Fruits and salads are most healthy as they don`t require reheating and maintain nutrition.
水果和沙拉是最健康的，因为它们不需要加热，同时还能保证营养不流失。
cooked food cooling, storage, reheating process, discussed the hazard analysis.
烹制食品的冷却、贮存、再加热等过程，进行探讨性危害分析。
four-pipe heat pump used to supply hot water in summer for air reheating.
空调水系统采用四管制能量提升机，在夏季提供热水，用于空调系统的再热。
It is the prior choice to optimize the reheating parameters with numerical simulation and experimental investigation in lab.
采用数值模拟和小型试验研究是实现二次加热优化设计的主要选择。
Third, some more cohesive. The thin is viscoelastic on solidification, reheating melting, use it again.
第三，有再黏性。当其涂刷在被黏物上冷却固化后，还可以重新加热熔融，再次使用。
Feed Water Piping, Main Steam Piping, Reheating Steam Piping (Hot), Reheating Steam Piping (Cold).
如果指锅炉部分的给水，主蒸汽、再热（热）和再热（冷）的话，应该是。
The two level computer control system is adopted on the reheating furnace in H Beam Mill of Magang Ltd.
马钢H型钢厂加热炉燃烧控制系统采用二级计算机控制系统。
Base on this , author modelings heat transfer of the reheating furnace.
在此基础上，对加热炉建立了热传导等数学模型。
The operation consists of reheating quench-hardened steel to some temperature below the critical range followed by any rate of cooling.
回火作业包括将淬硬钢重新加热到低于临界范围的某一温度然后以任意速率冷却。
Passing to design regenerative reheating furnace and get application experiences, the author expounds methods about how to . . .
笔者通过对蓄热炉的设计与应用经验，阐述了解决这一问题的方法。
Some negligence in design about discharge method of reheating furnace limit the speed and the output of PQF mill line.
由于再加热炉出料方式设计上的原因，限制了PQF轧机生产线的轧制节奏，从而影响产量。
Now all furnaces in Chengde Iron & Steel Corporation are regenerative reheating furnaces. Their application effect is very good.
承钢加热炉现全部是蓄热式加热炉，使用效果较好。
According to the result, the slab reheating process was optimized for productivity enhancement and energy saving.
以此为根据，优化了板坯加热工艺，达到了提高生产效率并节能减排的目的。
