weldment
美 ['weldmənt] 
英 [weldmənt]
- n.焊件；焊接装配；焊接结构；焊接分段
- 网络焊接件；焊接物；焊制件
词形变化
复数：weldments
英汉解释
英英解释
例句
Above three years of experience of weldment manufacturing enterprises or relevant purchasing.
有三年以上钣金制造业相关工作经验或相关采购经验；
The paper introduces the test of welding residual stress in weldment of constructional machinery and its distribution law.
通过测试工程机械结构件焊接残余应力，分析其分布特点；
Strength of resistance spot weld is determined by the physical attributes of weldment including material and geometric issues.
电阻点焊接头的焊接强度由母材和熔核的材料属性及几何特征决定。
The residual stress of the beryllium ring weldment was studied by FEM simulation and X ray stress measurement.
采用有限元分析法和X射线应力测试法对铍环形焊件的残余应力分布规律进行了研究。
First carries on the modal analysis experiment, analyzes under the different frequency weldment's vibration characteristic.
首先进行模态分析实验，分析出在不同频率下焊接件的振动特性。
The frame adopts the steel plate weldment with high strength, good rigidity and lighter weight.
机架采用钢板焊接件，强度高，刚性好，重量轻。
The resistance spot welding machines are designed to bring the welding current to the weldment in the most efficient manner.
电阻点焊机被设计为可使焊接电流以最有效的方式加载于焊接件上。
Frepair welding of thin-wall weldment working side of grey cast iron.
用于铸铁薄璧件及加工面的焊补。
Frepair welding on general grey cast iron weldment.
用于焊补灰铸铁件的缺陷。
Under the low-order natural frequency's vibration, weldment's mean stress value reduces about 40%-55%.
在低阶固有频率的振动下，焊接件的平均应力值降低40%-55%左右。
In addition, the brake lever must be bent so that it can clear the steering arm weldment.
此外，必须刹车杆弯曲，以便它可以清除转向臂焊件。
Effect of Mechanical Vibration Welding on the Fatigue Life of a Weldment and Analysis of the Effect Mechanism
振动焊接对焊件疲劳寿命的影响及机理分析
Weld with trailing impact rolling to control the residual distortion of the thin-walled planar circumferential weldment
随焊冲击碾压控制平面封闭焊缝残余变形研究
Numerical Simulation Research for Estimation of Creep Crack Mechanics Parameter for Cracks in the Weldment Interface of CT Specimen
CT试样焊缝界面裂纹蠕变断裂参量估算的数值模拟研究
Microstructure and Crack Susceptibility of Aluminium-Lithium Alloy Weldment
铝锂合金的焊缝组织与开裂敏感性研究
Electrophoretic Painting of Automotive Chassis Weldment
汽车底盘焊接件的电泳涂装工艺
Metal Magnetic Memory Test of Stress Concentration of Weldment in Different Heat Treatment Conditions
不同热处理状态下焊接件应力集中的金属磁记忆检测
Experimental Study on Improving Fatigue Behaviour of Weldment by Grinding Treatment
打磨处理改善焊缝疲劳性能的试验研究
Welding environment temperature should guarantee that weldment needed enough temperature and welder's ability couldn't be affected;
焊接的环境温度应能保证焊件焊接所需的足够温度和焊工技能不受影响；
Research on X-Ray Computer Tomography for Measuring Residual Stresses of Beryllium Weldment
铍焊件残余应力X射线断层扫描测定法
Nitrogen Content in the Fusion Weldment of High Nitrogen Austenitic Stainless Steel
高氮奥氏体不锈钢熔焊焊缝的氮含量
Ultrasonic testing of welded seam of faulted weldment and typical analysis of case
有缺陷焊件的焊缝超声波探伤及分析
Performance evaluation of weldment by mechanical test
用力学试验方法对焊接件进行性能评定
Designing approach of welding positioner of long weldment
大型构件焊接变位机的设计
The technique research on weldment face and root bend crack used MAG welding method
MAG焊试件面背弯曲易裂工艺研究
Numerical Investigations to J-integral in Cracked Weldment Containing Damage Based on Finite Element Method
含损伤焊接接头裂纹体J积分的有限元数值研究
Local heat treatment of stress relieving for weldment in furnace
局部加热解除焊接部应力的方法
Under the low-order natural frequency's vibration, weldment's mean stress value drops obviously;
在低阶固有频率的振动下，焊接件的平均应力值下降的最为明显；
Heat treatment of stress relieving for weldment in furnace
解除炉膛焊接部应力的方法
Technology of welding rails by hot aluminous weldment
浅谈铝热焊焊接钢轨技术
Study and Development of Weldment CAPP System for Low Voltage Circuit Breaker
低压断路器焊接件CAPP系统研究与开发
a. Stable weldment with seat for the trough
带支座的槽，稳定的焊件
Research on FEA method of weldment intensity based on example
基于实例的焊接强度有限元分析方法的研究
