crankshafts
美 [ˈkræŋkˌʃæft] 
英 [ˈkræŋkˌʃɑːft]
词形变化
复数：crankshafts
英汉解释
英英解释
例句
A few modern engines use cast crankshafts, made of special cast-iron containing chromium, nickel, and molybdenum.
多数现代柴油机是整体曲轴，用碳钢或含有镍、铬和钼的合金钢锻造而成。
After treatment, these crankshafts have concave surface, as well as retain minor black spots(see photo), and normal elsewhere.
经处理后，表面留有一处凹面，并有细微小黑点（请查看照片），其他地方正常。
This section describes the servicing of crankshafts, main bearings, and engine Blocks and cylinders.
本节介绍曲轴、主轴承、发动机机体和气缸的维修。
You can machine all types of crankshafts from single-cylinder to twelve cylinder crankshafts.
零件类型涵盖了从单缸到12缸的所有曲轴品种。
Crankshafts and connecting rods are not standardized.
曲轴以及连接杆都是没有标准的。
Cast iron crankshafts are satisfactory in car and light-duty truck engines.
铸铁曲轴满意在车里，轻型卡车发动机。
This is the ideal design milling, turning, broaching, and turn-broaching crankshafts.
这是针对曲轴铣削，车削，拉削，车-拉削加工的完美设计。
Application Study of the New Process of Production Line for Mini Diesel Engine Crankshafts
小型柴油机曲轴生产线新工艺的应用研究
Development and Application of Catenary Suspension Furnace for Quenching and Tempering of the Crankshafts
曲轴调质悬链炉的研制及应用
Superficial Analysis of Medium Frequency Induction Hardening Crack Occurrence on Nodular Cast Iron Crankshafts
球墨铸铁曲轴中频感应淬火裂纹浅析
pilot hole with non-rectangular entry to surface, conical special case at crankshafts to avoid small step (which can cause breakage)
引导孔非矩形或圆锥形特殊的案例像在曲轴上为避免出现小台阶（小台阶可能会导致损坏）
Specification for magnetic particle flaw inspection of finished machined solid forged and drop stamped crankshafts
成品机制整体锻造和落锻冲压曲轴的磁粉探伤规范
Standard Specification for Continuous Grain Flow Forged Carbon and Alloy Steel Crankshafts for Medium Speed Diesel Engines
中速柴油发动机用连续晶粒流向锻制的碳素钢及合金钢曲轴技术规范
Standard Specification for Ultrasonic Examination of Large Forged Crankshafts
大型锻件曲轴的超声检验的标准规范
Study on applications of wavelet-neural network technique in tractor engine crankshafts'faults detection
小波神经网络技术用于发动机曲轴探伤的研究
Studies on Application of Deep Rolling Depression Technology to Improve Fatigue Strength of Crankshafts
用深滚压技术提高曲轴疲劳强度的应用研究
Specification for Ultrasonic Examination of Large Forged Crankshafts
大的锻制曲轴超声检查规范
Application of the IGBT Variable Frequency Power Supply in Quenching Process of Engine Crankshafts
IGBT变频电源在汽车曲轴淬火上的应用
Calculation of Stress Intensity Factors for Cracked Diesel Engine Crankshafts
含裂纹柴油机曲轴应力强度因子计算
The ionitriding technology of the diesel engine crankshafts
柴油机曲轴的离子氮化工艺
Application of FE Method in Control over Gas Nitriding-Related Deformation of Crankshafts
有限元计算在曲轴气体渗氮变形控制中的应用
Ion Nitriding Technology of the Diesel Engine Crankshafts
柴油机曲轴的离子渗氮工艺改进
Big-diameter Crankshafts Produced by Electroslag Casting and Welding
电渣熔铸-熔焊法生产大直径内燃机曲轴的工艺研究
Ultrasonic Examination of Large Forged Crankshafts
锻制大型曲轴的超声波检验
Versatile solution for complete grinding of crankshafts
曲轴整体加工的多样化解决方案
Quality Control of Automotive Engine Nodular Cast Iron Crankshafts
车用发动机球铁曲轴的质量控制
Distortion Law and Control Method of High-Speed Diesel Crankshafts During Nitriding
高速柴油机曲轴渗氮畸变规律与控制措施
Design of Turning-broaching Cutter for Machining Crankshafts
加工曲轴用车拉刀的设计
Estimate of Application Prospect of Ductile Iron Crankshafts
球墨铸铁曲轴应用前景的评估
The Effect of Structure Morphology on the Fatigue Properties of Spheroidal Graphite Cast Iron Crankshafts
组织形态对球铁曲轴疲劳特性的影响
A Calibration Method for Measuring Data in Dynamic Balancing of Crankshafts
曲轴动平衡检测中一种数值校正方法
Quality control on machining of crankshafts used on Indian locomotives
印度机车用曲轴机械加工质量的控制
Reasonability analysis of iron plating for crankshafts
曲轴镀铁的合理性分析
Improving Measures for Tapping Quality of Steel Crankshafts
钢质曲轴攻丝质量的改进措施
Investigation on crankshafts for low speed big powered diesel engines
低速大马力柴油机曲轴情况的调查报告
Problems and the Relevant Solutions in Integral Grinding of Crankshafts
曲轴整体式磨削产生的问题和解决措施
Investigation on Oxynitriding Process for Nodular Iron Crankshafts
球铁曲轴加氧渗氮工艺研究
Design and manufacture of crankshafts of low-speed diesel engine for vessel
船舶低速柴油机的曲轴设计与制造
Development of Bend Distortion Measure Machine for Variety of Crankshafts
适应多品种曲轴弯曲变形测量机的研制
Study on Matching of Internal-combustion Engine Crankshafts and Bearings Based on Network Flow Programming
基于网络流规划的内燃机曲轴与轴瓦选配方法
