flange

flange

美 [flændʒ] 　英 [flændʒ]

• n.法兰；凸缘；（火车的）轮缘
• v.在…上安装凸缘
• 网络法兰盘；翼缘；法兰型

词形变化

复数：flanges  

英汉双解

英汉解释

n.	1. 【机】法兰(盘);凸缘;边凸缘制造机 2. 【建】(梁)翼缘 3. (铁路轨的)宽底
v.	1. 在...上安装凸缘

英英解释

n.	1. an edge that sticks out on a wheel so that it stays in the correct position

例句

The bottom of each air-water cooker is provided with a water inlet and a water outlet flange.

所述每个空水冷却器的底部装置进出水法兰。

We're capable of producing flange or other valve forged products. Here I enclosed a flange picture for your reference. Thank you.

我们有能力生产法兰或其他阀伪造产品。在这里，我封闭法兰图片供您参考。谢谢您。

It's a fixing flange with an easy pre-load regulation system. The flange is completely finished, ready to be used.

这一个固定法兰有容易操作预载调节系统。该法兰是成品，可直接投入使用。

Disconnect the relief valve hose from the elbow in the bottom flange cover at the swivel hose connection. Do not remove the elbow.

从底部法兰盖内的旋转软管连接弯头上断开安全阀。不要拆卸弯头。

The at least one web extends vertically from at least one of the top and bottom of the header pipe and is connected to the flange.

至少一个腹板从集管管道的顶部和底部中至少一个竖直延伸并连接到凸缘上。

During tests for BOP flange leaks, do not plug off the ring gaskets with bentonite or lost circulation materials to stop leaks.

对防喷器法兰进行试压时，不答应用膨润土或堵漏材料填堵密封槽来制止滴漏。

A bottom flange of the B-pillar is welded to a lower edge flange of the rocker reinforcement and a lower edge flange of the side sill.

B柱的底缘被焊接到槛板加强件的下边缘凸缘和侧梁的下边缘凸缘上。

and a flange arranged at the upper end of the hopper is connected with a feed delivery pipe.

所述料斗的上端设有法兰，所述法兰连接输料管道。

To hold the hub in place, insert a spoke through the cassette-side flange in the opposite direction of the first set of spokes.

以固定的枢纽，通过插入一个发言，在对第一组相反的方向辐条卡带端法兰。

These seals consist of a sleeve with a labyrinth flange and a seal ring that fits in the housing groove.

这些密封件包含一个带有迷宫法兰的套筒和一个密封环，密封环配合在轴承座的槽中。

FEM has been used to simulate and analyze the high pressure rubber forming process of part with flange bending.

利用有限元技术，对凸翻边钣金零件的高压橡皮成形过程进行模拟分析。

Dynamic loading of flange bolts allows expansion and contraction movement in and around the joint while maintaining a seal.

耳轮缘螺栓动态装货允许扩展和收缩运动在和在联接附近，当维护封印时。

The sectional shape of the invention is composed of two symmetrically arranged corrugated webs, a top flange and a lower flange.

其断面口型由两个对称放置的波纹腹板和上、下翼缘连体构成。

A vertical flange used for installing the motor is arranged at an end cover or a motor shell close to the impeller inducer end.

在靠近风叶端的电机机壳或其端盖上配置一立式安装电机用的法兰；

At least one premix fuel injector is spaced radially from the nozzle body and extends from the flange generally parallel to the nozzle body.

至少一个预混燃料喷射器从喷嘴主体径向分隔开并大致平行于喷嘴主体从法兰轴向延伸。

There is an air hole nearby of the flange of No. 1 sanitary pump inlet pipe, to be renewed.

1号清洁泵入口管的法兰盘附近有气洞，需换新。

Upon completion of the closure device will be used to plug into the next block to the hole in the pipe flange blind flange lock and seal.

在封堵完成后用下堵器将堵塞置入到管件法兰孔中锁紧并加盖盲板。

The gauges can be supplied with a rear mounting flange or front mounting flange as required for the installation conditions.

根据安装条件，随压力表可以提供一个后装配法兰或一个前装配法兰。

Note: You may increase the torque on the rubber sleeve up to two times the specified value without causing sleeve or flange damage.

注意：在橡胶套管上增加的扭矩可以达到规定扭矩值的两倍，在此时仍然不会对套管或法兰造成损害。

Position the bottom flange cover on the bottom of the relief valve body and secure by hand tightening the four bottom bolts.

将底部法兰盖放在安全阀阀体底部上，用手旋紧四个底部螺栓加以紧固。

In the light of the actual conditions of drawing deformation, the relationship of displacement with flange radius is established.

根据拉延变形的实际情况，建立了位移和凸缘半径之间的关系。

The utility model relates to a screw head structure, which comprises a screw head, a flute, an inserting recess and a flange.

一种螺丝头构件，包含螺丝头、凹槽、嵌槽及凸缘。

Seat end of valve must be mated to a standard flat faced metal flange. Rubber flanges not acceptable.

阀门的阀座端口必须与平面金属法兰配合。橡胶法兰是不可接受的。

The sleeve has a dome-shaped shielding portion at one end, and a flange portion to be fixed to a modulator block at the other end.

该套有一个圆顶形屏蔽一端的部分，以及法兰一部分固定在另一端调制块。

The bottom flange and the diaphragms must be selected carefully to match the product.

为与产品匹配，需仔细选择底部边缘和隔膜。

It turns white at the point of contact with the tray when it is removed without leaving residue on the flange.

原来在接触点白色时，没有留在法兰残留物托盘。

combi Smart is a three-part closure consisting of a flange, integrated cutting ring and a screw cap.

康美智慧旋盖是一个三部分封闭法兰组成，综合切割环和一个螺丝帽。

A gland bush flange connected to the bearing cap flange is arranged at the bottom of the open tube shaft.

在空心管轴底端有与轴承盖法兰连接的压盖法兰。

Cracks have been found in the flange and web splices at groove welds in at least four bridges.

至少在四座桥梁的翼缘板和腹板拼接坡口焊缝中发现了裂纹。

A hermetic terminal assembly is provided in the aperture including a cup-shaped housing surrounded by an annular flange.

密封端子组件，其包括延伸穿过所述孔并且被包括腿部的环形凸缘环绕的壳体；

The top flanges must also be leveled within . 0625 " across the flange width and length before and after welding in place. "

顶部翼缘在焊接之前和焊接之后的横向和纵向平整度必须小于0.0625英寸。

then the connection form flange, the flange will have to provide the name or polishing degree.

那末联接形式是法兰，则要提供法兰名义或抛光度。

It researched the sub-sea tie-in system primarily, ascertained the boundary condition, and made a detailed design of pipe and flange.

论文研究了深水海底管道的水下回接技术，确定了一系列边界条件，对管道和法兰进行了详细的设计。

There should be a blind flange between the two flanges here. In state of freedom, stagger joint shouldn't happen.

应当有盲板.处于自由状态时，不应有错口现象。

After the bead is started over the rim flange with the tool, the remainder of the bead can be worked out over the flange with the hands.

当用工具使轮缘从轮辋辋圈中脱出后，轮缘的剩余部分可用手将其扒过辋圈。

Driving gear unit is fixed on truck with help of flange and operates as an axle of the truck as well as transmission and driving motor.

电动轮通过连接基座与矿车接合作为后桥，起到了传动以及驱动矿车的作用。

The invention relates to a method for forming a flange by vibrating and winding and a forming machine thereof.

本发明涉及一种法兰振压卷绕成型方法及其成型机。

dispelling gas hole shall be additional provided on the side of flange for assembling transformer' convenience.

为了方便变压器安装，在法兰盘侧边增设了排气孔。

Inspect the integrity of pipe system and if the flange connections is normal or not according to the system principle drawings.

根据系统原理图，检查管系的完整性及法兰接头是否正常；

The gauges can be supplied with a mounting flange as required for the installation conditions.

我们可以根据安装条件为压力表提供一个装配法兰。