servo
美 ['sɜ:vəʊ] 
英 ['sɜ:vəʊ]
- n.（机器的）伺服系统
- 网络舵机；伺服马达；伺服机构
词形变化
复数：servos
英汉双解
1. | （机器的）伺服系统，随动系统a part of a machine that controls a larger piece of machinery |
英汉解释
英英解释
例句
When the speed servo system has a large torque reference, the output of its PI controller is often saturated.
当速度伺服系统的转矩参考值很大，转矩PI调节器的输出就容易饱和。
This paper presented mathematical modeling and simulation of an electro hydraulic servo system by means of a nonlinear analysis method.
运用非线性分析方法对一试验用电液伺服系统进行理论建模和仿真研究。
Now you can use a servo screw in and out of that hole all day long without stripping the threads - It also can't vibrate loose!
现在您可以使用伺服螺杆进出的洞整天都没有提线程-它还不能振动松散！
Speeds have been increased through the introduction of a servo - driven in- feed conveyor and a tray positioning system.
速度已增加通过引进一个伺服驱动，在饲料输送和托盘定位系统。
The feed drives, usually known as servo-drives, consist of a motor and its control which receives its motion instructions from the CNC.
加料传动，通常的理解是伺服传动系统，由一个发动机及其接受电脑数字控制系统动作指示的控制系统组成。
The result validates that this position control system using as the precision machine feed drive servo servo system is feasible.
实验结果初步验证了该位置伺服控制系统在精密加工机床上应用的可行性。
This paper carries on the simulated analysis of the digital hydraulic pressure servo cylinder used for the excavator dummy specimen.
对挖掘机虚拟样机中使用的数字液压伺服缸进行仿真分析。
A change of this kind took place in 1993 when several leading manufacturers launched software- synchronised servo-driven machines.
改变这种发生在1993年，当时几个领先的制造商推出的软件同步伺服驱动的机器。
With the rapid advancement of computer technology, AC motor servo system had replaced DC motor servo gradually and been used widely.
随着计算机技术、交流电机调速理论的发展，交流伺服系统逐渐取代直流伺服成为现代伺服系统应用的主流。
At least one micro servo section containing only a portion of said information is located within each data field.
在各数据字段中设置至少一个仅含部分上述信息的微伺服段。
Compared with a non-rotating missile standard autopilot, the body and fin servo models of the autopilot are both changed.
旋转变换后自动驾驶仪的弹体环节和舵机环节的模型均发生变化。
Testing results of the servo system developed show that the system is of high accuracy and excellent super low speed stability.
系统实测结果表明，可实现优越的精度和稳定的超低速运行特性。
Machine tool feed system is usually driven by AC servo motor ball screw feed drive to achieve, to simplify the structure.
机床进给系统现在通常采用交流伺服电动机带动滚珠丝杠来实现进给驱动，简化了传给结构。
These servo actuators are easy to use and offer quick implementation.
这些伺服驱动器易于使用，并提供快速执行。
The design and implementation of a signal processing circuit for the optical encoder used in digital servo system were introduced.
介绍了应用于数字化交流伺服系统的光电编码器信号处理电路的设计与实现。
Variable displacement servo pump in the small variable phase, likely to cause the low efficiency of the system, heat large shortcoming.
伺服变量泵在小排量变量阶段，容易造成系统效率低、发热量大等缺点。
A mirror angle measurement and a servo control apparatus for a Holographic Digital Data Storage (HDDS) system is disclosed.
公开了一种用于全息数字数据存储（HDDS）系统的反射镜角度测量和伺服控制装置。
The normal force is one of the key factors which affects the properties of a linear servo motor.
法向力是影响直线伺服电机运动性能的主要原因之一。
The hardware part of the servo system is designed, and a mathematical model is established in accordance with the principle of control.
设计了伺服系统的硬件部分，根据系统的控制原理建立了数学模型，并进行计算机数字仿真，分析了系统的稳定性。
The System structure and implementation of a self-developed multi-axes servo control chip with high performances is proposed.
本文介绍了自主研发的一种高性能多轴数字伺服控制芯片的系统结构与实现方法。
and the control system consists of a servo driver, a PLC, a touch screen, a conventional electric element and a pneumatic element.
所述控制系统由伺服驱动器、PLC、触摸屏、常规电器元件及气动元件组成。
Faster cycle speeds are also achieved by an advanced servo control, an innovative gripper arm design and intelligent software.
速度更快的周期，也实现了先进的伺服控制，创新的手爪臂设计和智能软件。
A new thermal compensation mechanism was offered as well, considering the specific feature of the GMM actuator for the servo valve.
针对伺服阀用GMM转换器的具体特点，提出了一种新型的热变形补偿机构。
and the driving mechanism consists of a servo motor, a tension component, a transitional component and a main shaft.
所述驱动机构由伺服电机、张紧组件、过渡组件、主轴组成；
Below two points would have to be considered as especially inevitable for servo controller.
以下两点必须被视为特别是伺服控制器不可避免的。
An improved repetitive control algorithm was developed to improve tracking accuracy for a linear servo unit in a numerical piston lathe.
为了提高非圆数控车削系统中直线伺服单元的跟踪精度，该文提出了一种改进的离散重复控制算法。
The servo drive is now an important element of a reliability-centered manufacturing strategy.
伺服驱动现在是可靠性为中心的制造策略的一个重要因素。
The results indicate that this servo-valve has good opening performance.
仿真结果表明高压电-气流量伺服阀具有良好的开启性能。
The error arising out of servo delay should not be ignored on condition that there is a large feed velocity or small curvature radius.
在大的进给速率或小的曲率半径条件下，伺服滞后所引起的轮廓误差是不可忽视的因素。
One of the trends on modern electronic drive control is developing new type alternating current (AC) speed regulation and servo system.
现代电气传动控制的发展趋势之一是开发新的交流调速与伺服系统。
Fast tool servo (FTS) is one of the key technologies in both non circular turning and non-axisymmetric turning fields.
快速刀具伺服机构（FTS）是非圆数控车削和非轴对称车削的一项共同的关键性技术。
The design about a MIMO servo mechanism by using numerical EDA method will base on the result of this study.
据此研究之结果将作为日后以数值法引用EDA理论应用于多输入多输出控制系统之设计。
The system has the function of servo control. The software of the system can be updated and transplanted.
该控制系统可以实现伺服控制，其软件可扩展，可移植性比较强。
Identification experiment shows that it has great practical meaning for inertia identification for two-mass servo system.
辨识实验表明：该方法对柔性伺服系统负载惯量的在线辨识具有较大的实用意义。
And then by means of simulation test the measures of improvement for enhancing the resonance frequency of servo mechanism were put forward.
进而通过仿真实验提出了提高伺服机构谐振频率的改进措施。
"The servo motor and drive are integrated into a single unit, " says Joe Faust, electrical engineering manager at Douglas.
“的伺服电机和驱动器集成到一个单一的单位，”乔说浮士德，电子工程经理道格拉斯。
The servo-control, the entire journey closed loop localization, seeks for the paper to be possible automatically to draw a chart the region.
伺服控制，全程闭环定位，自动寻找纸张可绘图区域。
High-performance nonlinear tracking control problem for a hydraulic servo-system with parametric uncertainties is considered.
针对存在不确定参数的液压伺服系统，提出了高性能轨迹跟踪控制器的设计方法。
Electro-hydraulic servo control system is an important branch of hydraulic field, and an important component of control technology.
电液伺服控制系统是液压领域的重要分支，也是控制技术的重要组成部分。
A linearized mathematical model for the developed triplex redundance servo control system is derived on the basis of its mechanism analysis.
对研究的三余度伺服控制系统的机理进行分析，建立了被控对象的线性化数学模型。
