billet

billet

美 [ˈbɪlɪt] 　英 ['bɪlɪt]

• n.部队临时营舍（常设在民宅里）
• v.部队临时设营（常在民宅里）
• 网络钢坯；方钢；钢方坯

词形变化

复数：billets  现在分词：billeting  过去式：billeted  

同义词

英汉双解

英汉解释

n.	1. (金属的)坯段;钢坯 2. 〈英〉职位,地位 3. 【军】分配令 4. (兵士分住民家或公共建筑物时的)营舍 5. 便条;短简 6. 【航】船员宿舍 7. 木柴块 8. 【建】错齿饰
v.	1. 为...指定宿营地,为...分配宿舍 (on) 2. 住屯

英英解释

n.	1. a place, usually someone’s house, that soldiers live in temporarily, especially during a war
v.	1. to put soldiers in a billet

例句

As the surface hardness of low carbon steel billet is rather low, when billet is blasted, pit defects will occur on its surface.

前言：低碳钢小方坯表面硬度较低，抛丸时会在钢坯表面留下“凹坑”缺陷。

teaching in a boys cramming - joint down in pennsylvania , and of all private little hells such a billet is the limit.

靠远在宾夕法尼亚州一个填鸭式的男校教书。在所有私立的小地狱里这种地方是最糟糕的。

There was no obvious oscillation mark on the billet surface. The average steel production of a copper tube was 3700 ton.

铸坯表面质量良好，单根铜管的平均过钢量为3700吨。

This paper presents the application of photoelectric switches to the on-line measurement of the length of a hot rolling billet .

本文介绍了光电开关在热轧钢坯长度在线检测中的应用。

The surface quality of billet can be improved effectively by exerting the equiamplitude high frequency electromagnetic field.

施加等幅高频磁场能够有效提高铸坯的表面质量。

The formation of billet internal cracks, surface cracks, the dark belly and centres segregation defects has close ties with cooling.

连铸坯内部裂纹、表面裂纹、鼓肚和中心偏析等缺陷的形成都与冷却有着紧密的联系。

The old mansion served as the soldiers' billet for a week.

士兵在那所古宅里住了一个星期。

And with custom-machined heads, custom camshafts and a billet crankshaft, it's hard to argue you're not getting your money's worth.

与定制加工元首，自定义凸轮轴和曲轴坯，很难说你没有得到你的钱值得。

Examined by the light of the lantern, this proved to be a folded paper-a billet.

拿灯笼仔细一照，原来是张折叠着的纸--一张字条。

Worse, China's private-equity industry has become another lucrative billet for the children of powerful officials.

更糟的是，中国私募行业又一次成为了高官子女轻松获利的天堂。

For the consistent of each flow casting billet quality, the magnetic induction intensity of each flow mould must be measured frequently.

为了保证各流铸坯质量一致，必须对各流结晶器内的磁感应强度经常进行测定。

Also the extrusion pressure is not affected by length of the billet in the extrusion press since friction is not involved.

可见，缸体内的坯料保持静止，没有产生摩擦力，挤压力也不会受坯料长度影响。

In the outer wall of a thin glaze where objects can see tire marks on the rotating billet, commonly known as "bamboo brush pattern. "

在器物外壁薄釉的地方能看出胎上的旋坯痕，俗称“竹丝刷纹”。

and compared with the method of coating a protecting layer on the surface of the billet, the cost and the labor intensity are reduced.

与在钢坯表面涂保护涂层等方法相比，降低成本和劳动强度。

It appears that the surface quality of billet is related with the friction force.

这表明，铸坯表面质量与拉坯阻力直接相关。

The invention discloses a heating method used for preventing the high carbon strip billet from decarburizing.

本发明公开了一种防止高碳带钢坯脱碳的加热方法。

For the same size of billet and finished shape, the total effective strain of ring increases with increasing feed speed.

同样尺寸的坯料和成品，芯辊进给速度越大，内层的累积等效变形越大；

by the sintering, obtain the densification law of powder sintering process for the molybdenum billet.

由烧结实验研究，得出烧结工艺对钼粉坯料致密化的影响规律；

The invention relates to mechanical swing type atomizing draining system used to make large size spray deposit billet.

适于制备大尺寸喷射沉积坯锭的机械摆动式雾化导液系统，它涉及材料加工的雾化导液系统。

The technical requirement of oxidation resistant coatings applied to steel billet in high temperature dynamic process was analyzed.

分析了动态过程钢坯高温防氧化涂料的技术要求。

Examined by the light of the lantern, this proved to be a folded paper-a billet.

拿灯笼仔细一照，原来是张折叠着的纸--一张字条。

The graph in FIG. 6 shows a predictive set of curves for exit temperature as a function of billet location and extrusion speed.

图6中的坐标图示出了出口温度与坯料位置和挤压速度关系的一组推测性曲线。

It is concluded that the original crack of billet is the root of the side longitudinal crack of jobbing sheet.

确认了板坯原始裂纹是造成中板边部纵向裂纹的根源。

It is constructed from anodised billet aluminium and is sturdy enough for the challenging environment of the timber mill.

它是由阳极化铝坯料是不够坚固的富有挑战性的环境木材厂。

Improving C-C billet's cleanliness is one of the important technologies.

提高铸坯洁净度是其中一项重要技术之一。

Billet size of forged piece and plate work piece with complicated shape are often confirmed by many die settings, so its cost is high.

对于形状复杂的锻件或钣金件，其坯料尺寸通常需要经过多次试模才能确定，因而成本较高。

Billet Casting my company so far to provide more than 20 production lines, running stable, reflecting good customer.

小方坯连铸我公司到目前为止以提供20多条生产线，运行稳定，客户反映良好。

Solidification and composition segregation of billet are important factors which affect homogeneity of mechanical property of steel.

连铸坯的凝固组织和成分偏析是影响钢材力学性能均匀性的重要因素。

A new kind of combustion named high temperature air combustion with enriched oxygen content is applied into the billet heating furnace.

针对钢坯加热工艺提出一种高温富氧空气燃烧新技术。

FIG. 6 shows a set of curves for exit temperature as a function of billet location and extrusion speed.

图6示出了出口温度与坯料位置和挤压速度关系的一组曲线。

and a steel billet positioning mechanism is arranged on the slide rail mechanism.

在所述的滑轨机构上设置钢坯定位机构。

The results show that the cause of interior cracks of LC9 forged ring is due to inclusions existed in the billet of forged ring.

结果表明，锻环圆锭毛坯中存在夹杂是导致LC9锻环内裂的原因。

The oxidation resistant coatings applied to steel billet at high temperature were summarized.

概述了国内外钢坯高温防氧化涂料的研究现状。

and he conducted me to the Crooked Billet in Water-street.

他带我到水街上的曲折营旅馆。

The experiment of hot rolling billet verified that the theoretically calculated value is identical with measured one.

经热轧实验证明，理论计算与实测数值接近。

The profiled billet continuous casting technology belongs to advanced technology inthe world and domestic empty project.

异形坯连铸技术在世界上属于先进技术，在国内属空白项目。

The results show that the billet location modes have a great effect on material flow states, which decide whether the forming defects form.

结果表明，坯料定位方式对金属流动状态影响很大，直接决定成形缺陷是否形成。

The solid billet could also be used with a spider die, porthole die or bridge die.

固体钢坯也可用于模具的蜘蛛，舷窗死亡或桥梁死亡。

Design and Research of the Billet Bidirectional Hot-centering Machine of the Seamless Tube Plant of Baotou Steel Corp.

包钢无缝厂管坯双向热定心机设计与研究。

Firstly, a model for predicting billet temperature is constructed based on a heat transfer equation and its boundary conditions.

首先，基于钢坯导热偏微分方程和边界条件，建立钢坯温度预报模型。

This die carrier is with convenient assembly, universal purpose property suitable for gear billet closed forming.

该模架组装方便，适用于齿轮坯闭式模锻，并且具有通用性。