solder
美 [ˈsɑdər] 
英 [ˈsɒldə(r)]
- n.焊料；焊锡
- v.焊接；焊合
- 网络焊剂；焊接剂；软焊
词形变化
第三人称单数：solders 现在分词：soldering 过去式：soldered 同义词
英汉双解
1. | [u] 焊料；焊锡a mixture of metals that is heated and melted and then used to join metals, wires, etc. together |
1. | ~ sth (to/onto sth).~ (A and B together) 焊接；焊合to join pieces of metal or wire with solder |
英汉解释
英英解释
例句
Just as with the lead-based solder alloys, there are several alloys that seem to be the most commonly used.
就如同使用含铅焊料合金一样，同样也存在几种看来最为常用的合金。
and the adhesive layer is at least arranged on the lower surface of the ball collecting space to adhere the solder remains.
所述至少一黏着层至少设置在所述集球空间的下表面，以黏着所述焊料残骸。
In some cases it may be necessary to connect metal surfaces by means of a hard spelter solder which fuses at hight temperature.
某些情况下有必要用一种高熔融温度的强锌焊料来连接金属表面。
The mill duty latching connectors are are easy to wire with no need to field solder or to struggle with a crimp pin.
该厂责任闭锁连接器线很容易，无需现场焊接或作斗争，一卷曲针。
The reset button will "clip" in and stay put until you are ready to solder it in permanently.
重置按钮，将“剪辑”，并留在付诸表决，直到您准备焊料，它在永久。
In the surface mounting technology, the result of the solder printing is very big to the product quantity.
在电子装联技术中，焊膏印刷的效果对产品质量关系极大。
Resist: Coating material used to mask or to protect selected areas of a pattern from the action of an etchant, solder, or plating.
阻剂：用来选择性保护某图形区域免受蚀刻剂，焊料或电镀影响的涂层材料。
When washing is invalid, the solder may be out to put the residue to remove, until thoroughly until clean.
当冲洗无效时，可采用钎敲，以把残渣去掉，直至彻底干净为止。
Very low leakage current , compact , easy to use power entry filter with fast on tabs or solder terminals .
低漏电流，小巧，端子嵌入或焊锡，方便安装和使用。
Subsequent inspection under magnification identified three solder joint which appeared to have melted and resolidified (see below).
接续的显微镜检查发现，有三处焊接点似乎已被熔损并固化。
They were made from a wrought-iron sheet bent into a cylinder and joined along the seam with solder containing more than 90 percent lead.
这种罐是由精制铁皮卷成圆筒而成，切口的缝由铅含量达90%以上的焊锡来焊接。
The method for forming a solder mold for transferring solder to a wafer includes etching a plurality of solder cavities into a substrate.
一种用于形成用于将焊料转移到晶片的焊料模的方法包括将多个焊料腔蚀刻到基板中。
If this happens the Fe concentration will increase rapidly and Fe-crystals can be seen on the surface of the solder pot.
如果发生这种情况，铁浓度将快速上升，并且会在焊料槽表面上看到铁结晶。
epoxy resin glue seems to be easier than solder paste bonded scraper.
环氧树脂胶水仿佛比锡膏更便当粘结在刮刀上。
The present invention relates to a solder paste composition used for precoating an electrode surface with solder.
本发明提供一种钎焊膏组合物，该组合物可应用于电极表面预涂钎料。
The circuit board comprises a dielectric layer, a circuit layer and at least one electricity-conducting joint pole and a solder mask.
一种电路板，其包括介电层、线路层、至少一导电接合柱与焊罩层。
The old solder's face was white. Herbert and his mother laughed, but Mr White looked at Tom's face.
老兵的脸变白了。赫伯特和他的母亲笑了起来。但怀特先生却看着汤姆的脸。
A solder paste used for brazing was developed and its technical performance was investigated.
研制了铝硬钎焊用钎料膏，对其工艺性能进行了研究。
Therefore, electroplating of lead-free solder coating is one of investigation hotspots in electronic electroplating field.
因此，电沉积无铅可焊性镀层是电子电镀领域的研究热点之一。
Now press the hot iron firmly against the splicewhile letting the free end of your solder rest against the other side of the joint.
现在，紧按住电烙铁顶压在接头上，同时让余下的锡焊料的“空闲”的未端去接触接头的另一侧。
All solder powders that are used for our paste manufacturing are made under inert atmosphere and under tight quality control program.
我们制造焊膏所使用的焊锡粉是在惰性气体和严格质量控制之下制成的。
Analysis of the solder pot is done by means of Atomic Absorption Spectrophotometric (AAS) or Inductive Couple Plasma (ICP) .
对焊料槽的分析是通过原子吸收分光光度（AAS）或电感耦合等离子（ICP）方式实现的。
apply flux to outside of tube and inside of solder cup . surfaces to be joined must be completely covered . use flux sparingly.
在管道外面和焊接端口内侧涂上焊剂。需要连接的表面必须完全覆盖焊剂。要节约使用焊剂。
New developments in flux chemistries for lead-free pastes do not require nitrogen to achieve good wetting and solder joint integrity.
无铅焊锡膏的焊剂化学的新发展可以做到不使用氮气也可得到良好的熔湿性和焊点完整性。
2-D X-ray cannot be used on double-sided boards unless each solder joint is in a unique location relative to the opposite side of the board.
第2，除非每焊剂联接在一个独特的地点相对委员会的反面X射线在两面的委员会不可能使用。
Heat solder joints only to the point were solder will flow properly. Excessive heat may distort brass castings.
热焊料连接只能用在焊料能够正确流动的地方。过热可能扭曲黄铜铸件。
The solder glass is in a powdered form and is suspended in a liquid carrier for ease and accuracy of application.
为了便于使用和精确控制，焊料玻璃呈粉末状，并悬浮于液态载体中。
The company mainly produces seal ring, nozzles, bushings , drilling teeth, solder films, ball valves, valve seats and other products.
公司主要生产密封环、喷嘴、轴套、钻齿、钎片、阀球、阀座等产品。
More than 3 years working experiences in SMT processing and strong willing to be a technical sales in selling lead- free solder paste .
年以上SMT生产线工艺制程控制经验，具有销售无铅锡膏产品的愿望。
The mould component can be used for testing exothermic solder molten metal mobility.
该模具组件可以用以测试放热焊接剂熔化金属流动性。
It is difficult for cream solder to enter into a male terminal insertion path at an inner side of the female connector.
膏状焊料难以进入在所述阴连接器内侧的阳端子插入路径。
The minor lead would be found in lead-free solder rods after using them, then it makes the lead contaminant for the electronic components.
在无铅焊锡棒材上使用后都会发现含有少量的铅，而后会对对其电子元件造成铅污染。
Do not touch solder paste bare-handed . Remove with ethyl alcohol from body or clothes if contaminated by solder paste.
小心使用焊膏，避免触及皮肤。若附于衣服或身体时，应尽快用含有酒精的溶剂把焊膏抹掉。
The experiment results show that there is linear relationship between the solder joint creep damage and its resistance changes.
研究表明，焊点的蠕变损伤与其电阻变化存在着线性关系。
This will aid the solder in sticking to the wires allowing you to make more precise connections with less solder.
这将会在黏住允许你用比较少的焊接剂来制造比较精确的连接电线方面援助焊接剂。
One of the best predictors of resultant solder joint integrity is the volume of solder paste that was applied earlier in the process.
最佳预示所生成的焊点完整性的因素之一，是组装过程起始施加的焊膏量。
In electronic material relation, we supply special conductive paste and a special register strike, solder, etc.
在电子材料的关系，我们供应特殊导电粘贴和特殊登记罢工，焊料等
Because in addition to the solder pads, and so on, the rest of the surface has a layer of resistance to soldering of the solder mask.
因为除了需要锡焊的焊盘等部分外，其余部分的表面有一层耐波峰焊的阻焊膜。
Solder Balling is recognized by numerous tiny solder balls trapped along the peripheral edge of the flux residue after reflow.
产品回焊后在残留的助焊剂周边会有大量小的锡球。
The company was founded in 1899 as the Chicago Solder Company to produce flux -cored solder .
凯斯特公司创立于1899年，当时公司名为芝加哥焊锡公司，主要产品是带有焊剂芯的焊锡。
