tundish
美 ['tʌndɪʃ] 
英 ['tʌndɪʃ]
词形变化
复数：tundishes
英汉解释
英英解释
例句
The tundish temperature is one of the factors which seriously affect the solidification position of continuous casting slab.
中间包温度是影响连铸板坯凝固位置的重要因素之一。
The ingredients of magnesium coating used as the working Lining of the continuous casting tundish and its slag resistance are studied.
对中间包工作衬用镁质涂料的配比及其抗渣性进行了研究。
A continuous casting stopper flux controlling mouth relates to a tundish casting nozzle in a metal continuous casting equipment.
一种连铸塞棒控流水口，涉及金属连续铸造设备中的中间包浇注喷嘴。
The utility model has the advantages of stable blank casting quality, longer service life of the tundish, wide popularization prospect, etc.
本实用新型具有稳定铸坯质量，提高中间包使用寿命，具有广泛的推广前景等特点。
The tundish slag penetration in coating is one of the key factors affecting coating removal after use.
中间包渣在涂料中的渗透是影响涂料用后解体性能的关键因素。
The utility model relates to the metallurgy continuous casting technology, in particular to a tundish nozzle preheating equipment.
本实用新型涉及冶金连铸技术，尤其涉及中间包水口预热装置。
As a result, tundish current regulator can efficiently prevent short current flow and improve metallurgical result of tundish.
结果表明，使用中间包稳流器能有效地防止短路流，改善中间包冶金效果。
By the inference-resisting advantage of PLC, this paper gives a design which can improve the control of the tundish car.
利用PLC自身抗干扰的优点，本文给出一种设计方案，改进了中间罐车的控制。
Due to the bad conditions, the control of the tundish car is easy to be interfered by the environment.
由于现场环境恶劣，中间罐车的控制易受外界干扰。
With the improvement of continuous casting process , the techniques of tundish devices have been developed in recent years.
近年来随着连铸技术的不断提高，中间包的冶金技术也有了很大的发展。
Comparing with double dams, the tundish fixed with baffles has a similar minimum residence time, but a less dead volume.
导流挡板与双挡墙比较，最短停留时间变化不大，但死区体积更小。
Different gas blowing parameters are needed when gas is blowing through different porous materials at the same position of the tundish.
在中间包底部同一位里吹气时，气体通过的透气砖不同，要求的吹气参数不同。
some measures of quickly tundish changing, prevention of immersed nozzle clogging, rapid equipment maintain technology were described.
阐明了所采取的快速更换中间包、防止浸入式水口堵塞、设备快速维修等技术措施。
On the basis of experiments of water model, the heat tests in two kinds of tundish were carried out in Linfen Iron &. Steel Co.
在水模型研究的基础上，进行了生产试验，研究了两种中间包内的钢液温度分布及夹杂物去除率。
Holding propreties of ladle and tundish is one of important subjects for steelmaking process.
钢包及中间包的保温是炼钢工艺中研究的重要课题之一。
The influence of turbulence inhibitors with different structure on fluid flow behavior in tundish was studied by water modeling experiments.
通过水力学模型实验，研究了不同结构的湍流控制装置对中间包流体流动特性的影响。
The higher porous baffle wall can improve the flow pattern of the molten steel and enhance the metallurgical effect in tundish.
多孔高挡墙可以改善钢水流态、提高中包冶金效果。
The utility model discloses a novel turbulence controller applied inside a continuous casting tundish for steelmaking.
一种用于炼钢连铸中间包内的新型湍流控制器。
The temperature distribution in modified tundish is homogeneous and such tundish is useful to enhance the quality of continuous cast slab.
优化后的中间包钢液的温度分布均匀，有利于提高连铸坯的质量。
By using the similar principles, a physical model of thin-slab tundish with a certain scale was established in lab.
依据相似原理，在实验室建立了一定相似比的薄板坯连铸中间包物理模型。
By using the similar principles, a physical model of thin-slab tundish with a certain scale was established in the Lab.
依据相似原理，建立了一定相似比的薄板坯连铸中间包物理模型。
By optimizing the shape of tundish, high grade protecting slag and flw field in mould, perfect effects are gained in operation.
并通过对中间包包形、保护渣、结晶器流场等的进一步优化，确保其达到安全、高效、稳定、顺行的理想效果。
Analysis of RH carbon content by drilling bits will decrease the difference of carbon content between RH and tundish.
用钻屑分析RH碳含量可提高与中间包碳含量的可比性。
The flow control devices of tundish for ingot casting has been optimized through hydraulics simulated experiment.
通过水力学模拟实验，优化了模铸连浇中间包控流装置。
The macro inclusions in slab are mainly from the mould flux, and secondly from the ladle slag, and less from tundish flux.
板坯中大型夹杂物主要源于结晶器保护渣，其次源于钢包渣，少部分源于中间包覆盖剂；
Continuous casting process and billet quality were directly impacted by the bath level of molten steel in tundish.
钢液在中间包内液位直接影响到连铸生产过程的顺行和铸坯质量。
Tundish and ladle safety linings, ladle bottom and mending installation of ladles .
钢包、中间包永久衬，钢包底，钢包衬补浇等。
The temperature difference and inclusion analysis of liquid metal in tundish were determinated in the production line to test the design.
然后在实际生产中应用，测定中间包内的钢水温度差、取样分析夹杂物，以验证设计的合理性。
The results show that there are short circuit flow and large dead volume in the tundish without flow control devices.
实验结果表明，该中间包在无控流装置时存在短路流，死区较大；
The flow in tundish has a great effect on the floatation of non-metallic inclusions.
中间包内流体的流动状态对夹杂物的去除有重要的影响。
The development process and application situation of the self flow castable for permanent lining of tundish are introduced.
介绍了中间包永久层用自流浇注料的研制和使用。
The influence of turbulence inhibitor on flow field in tundish has been studied by water modeling.
通过水模实验，研究了湍流控制器对连铸中间包流体流动的影响。
A computer vision based on-line molten steel level measurement method is proposed for continuous casting tundish.
本文提出了一种通过计算机视觉技术检测连铸中间包内钢水层液位高度的方法。
The critical highness of slag entrapment was gained in tundish.
同时确定了中间包卷渣的临界高度。
And the suitable thermal martix for magnesium dry coating in tundish was put forward.
提出合理的中间包用镁质干式涂料的高温结合剂。
Large inclusion come from mould fluxes, oxidation products, tundish covering flux and so on.
大型夹杂物主要来源于结晶器卷渣、氧化产物和中间包覆盖剂等。
In order to study the hot state of the tundish, the digital sampling temperature measuring equipment was developed.
为研究中间包的热状态，开发了计算机数字采样测温系统。
Mathematical Simulation of Steel Flow and Inclusion Movement in the Tundish with Gas Blowing at the Bottom
底吹中间包内钢液及夹杂物运动特性的数模研究
Analysis and Treatment of Synchronous Hydraulic up and down Troubles of Intermediate Tundish Carriage for Billet Caster
方坯连铸机中间罐车升降同步故障分析与处理
electromagnetic cleaning-ladle electromagnetic stirring, tundish centrifugal separating and mold electromagnetic braking;
电磁净化-钢包电磁搅拌、中间包离心分离和结晶器电磁制动；
